Page 1
Contents
1. About these Instructions ..............................4
1.1. Symbols and Key words used in these
Instructions ..................................................... 4
1.2. Proper use ........................................................ 6
1.3. Usage limitations .......................................... 7
1.4. Additional costs for Internet and
roaming usage ............................................... 8
2. Safety instructions ........................................9
2.1. Making calls while driving ......................... 9
2.2. General ...........................................................12
2.3. Cleaning and care .......................................16
2.4. Data backup ..................................................17
2.5. Information about the display ...............17
2.6. Notes on batteries and rechargeable
batteries .........................................................18
2.7. Environmental requirements ..................20
2.8. In the event of faults ..................................21
2.9. People with pacemakers ..........................22
2.10. People with hearing aids ..........................22
2.11. Emergency calls ...........................................22
2.12. Saving a number for use in
emergencies .................................................23
3. Contents of package ................................... 25
3.1. Overview of the device .............................26
4. Preparations for using the telephone ....... 27
4.1. SIM card ..........................................................27
4.2. Inserting cards .............................................28
1 of 64
Page 2
4.3. Charging the battery .................................29
5. Operation .................................................... 30
5.1. Switching on the telephone ...................30
5.2. Operating the telephone .........................30
5.3. After switching on the telephone .........31
6. First use ....................................................... 31
6.1. Switching off the phone ...........................33
6.2. Switching to sleep mode .........................34
6.3. Waking up the phone from sleep
mode ...............................................................34
6.4. Main screen ...................................................35
6.5. Status and notification symbols ............37
6.6. Using the notification field ......................39
6.7. Favourites list ................................................40
6.8. Telephone calls ............................................41
6.8.1. Accepting calls .............................................41
6.8.2. Rejecting calls ..............................................41
6.8.3. Rejecting a call with an SMS ...................41
6.8.4. Contacts .........................................................42
6.9. SMS/MMS .......................................................42
6.9.1. Writing a new message.............................43
7. Connecting to the Internet ........................ 44
7.1. Adding a new data network
connection ....................................................45
7.2. Additional costs for Internet and
roaming usage .............................................46
7.3. Internet ...........................................................47
7.4. Limiting data usage ...................................47
2 of 64
Page 3
7.5. Changing the data volume ......................48
7.6. Activating Wi-Fi ............................................49
8. Addendum to instructions for use of
smartphone ................................................. 50
8.1. Exposure to radio frequency energy ...50
9. Disposal ....................................................... 51
10. Conformity information as per R&TTE ..... 52
11. Technical data ............................................. 53
12. Licence information .................................... 55
13. Legal notice ................................................. 62
14. Index ............................................................ 63
3 of 64
Page 4
1. About these Instructions
Before using the device for the first time,
please read these operating instructions
carefully, paying special attention to the safety
notices.
This device should only be used as designated
and as described in these instructions.
Please keep these instructions in a safe place
for future reference. Always include these
instructions if selling or giving away the
device.
1.1. Symbols and Key words used in
these Instructions
DANGER!
Warning of immediate risk of
fatal injury!
WARNING!
Warning: possible mortal
danger and/or serious
irreversible injuries!
WARNING!
Warning: danger due to
excessive volume!
4 of 64
Page 5
CAUTION!
Warning: possible light or
moderate injuries!
PLEASE NOTE!
Please follow the guidelines
to avoid property damage.
Additional information on
using the device.
PLEASE NOTE!
Please follow the guidelines in
the operating instructions.
5 of 64
Page 6
1.2. Proper use
Your appliance offers a number of options for usage:
• The device is intended for private use only and not for
industrial/commercial use.
Please note that we shall not be liable in cases of
improper use:
• Do not modify the device without our consent and do
not use any auxiliary equipment which we have not
approved or supplied.
• Use only spare parts and accessories which we have
supplied or approved.
• Heed all the information in these operating
instructions, especially the safety information. Any
other use is deemed improper and can cause personal
injury or damage to the device.
• Do not use the device in extreme environmental
conditions.
6 of 64
Page 7
1.3. Usage limitations
It is essential to turn off the telephone in the following
situations:
• Before boarding an aircraft or before packing it in your
luggage. The use of radio devices in aircraft can have
dangerous effects on the flight controls and interrupt
radio contact and is thus prohibited.
• In hospitals, clinics or other health centres and in any
locations in the direct vicinity of medical devices.
• In all locations where there is a risk of explosion (e.g.
petrol stations; in dust-filled environments, e.g. where
there is metal dust).
• In locations where the use of radio-controlled devices
is prohibited, e.g. on construction sites or locations
where people are working with explosives.
• While driving a motor vehicle (if no hands-free car kit
is available).
7 of 64
Page 8
1.4. Additional costs for Internet
and roaming usage
Significant volume-based data costs may apply when
using the mobile Internet. In order to limit these costs, we
recommend that you purchase a contract with an Internet
flat rate.
PLEASE NOTE!
When the phone is used for the first
time, roaming is deactivated. Check
your mobile service tariff before
using the device and, if required,
switch off mobile data services
until you have activated a suitable
Internet flat rate.
8 of 64
Page 9
2. Safety instructions
2.1. Making calls while driving
As making calls can reduce concentration
levels (while driving a car or riding a bicycle),
this may contribute to accidents occurring.
The following instructions should be
followed exactly.
It is an offence to hold a telephone in your
hand (or between your head and your
shoulder) to make a call while driving. It is
also illegal to write SMS, e-mail or use other
programs while driving. Failure to comply
will result in fines and in your name being
entered in the central traffic offenders
register.
The use of hands-free sets is allowed.
PLEASE NOTE!
A wired headset is not a handsfree set and may not be used while
driving.
9 of 64
Page 10
WARNING!
Impairment to hearing!
Listening through earphones or
headphones at excessive volume
levels, as well as changes to the
basic settings of the equaliser,
drivers, software or operating
system generates excessive
acoustic pressure and can lead to
loss of hearing.
Before pressing play, set the
volume to the lowest setting.
Start playback and increase the
volume to a comfortable level.
Hands-free systems should
only be installed by suitably
qualified professionals. Incorrect
installation or maintenance can
have hazardous consequences and
may also void your guarantees –
also that of the car. Irradiation of
the car’s on-board electronics can
cause serious defects and result in
10 of 64
Page 11
danger to life and limb for you and
others.
Do not use the mailbox while driving. Do
not listen to your messages until you have
parked the car and switched the motor
off.
If you accept a call via the hands-free set
while driving, keep the call as short as
possible. Concentrate on your driving. Try
to to find a parking area before making a
call.
Please comply with all national
regulations if you use your mobile while
driving abroad.
If you need to call often while driving, you
should have a hands-free system installed
in your car. These systems have been
specially developed for this purpose.
Ensure that neither your telephone nor
the hands-free system can interfere with
the functionality of the safety equipment
in your car.
11 of 64
Page 12
For cars with airbags: Bear in mind that
the activation of the airbag involves
the release of a large amount of force.
Therefore, never install permanent
telephone equipment in the area above
the airbag or in the space occupied by the
deployed airbag.
If telephone or accessories are incorrectly
installed this can lead to serious injury
when the airbag is activated.
2.2. General
Do not let children play with electrical
appliances without supervision. Children
are not always aware of potential hazards.
CAUTION!
Risk of electrical shock!
There are live components inside
this AC adapter. In the event of
an unintentional short circuit of
this AC adapter, there is a risk of
electrical shock or fire!
12 of 64
Page 13
Do not open the housing of the AC
adapter.
Do not insert anything into the device
through the slots and openings. This
could result in an electrical short-circuit,
an electric shock or even ignite a fire
which will damage the product.
Avoid exposing the device to water
droplets or spray and do not place vases
or anything containing water on the
device. Liquids penetrating the device
may impair the electrical safety of the
product.
Operate the mains charging device only
on earthed power outlets with AC 100–
240V~, 60Hz. If you are not sure about
the power supply at the set-up location,
please ask your power supplier.
The socket must be close to the device
and easy to access.
Use only the supplied mains charger with
the supplied USB cable.
13 of 64
Page 14
For extra safety, we recommend using an
overvoltage protection device to prevent
the product from sustaining damage as a
result of power surges or lightning strikes.
If you want to disconnect the device from
the mains, first pull the mains charger
out of the wall socket and then the plug
on the product. The mains charger or the
device may be damaged if this process is
carried out in the reverse order. Always
take hold of the plug when disconnecting
the cable from the socket. Never pull on
the cable.
Position the cable so that it cannot be
stepped on or tripped over.
Do not place any objects on the cables to
avoid damaging them.
Do not allow plug-in connections to
come under impact, e.g. from lateral
forces. This could cause internal and
external damage to the product.
Do not apply force when connecting
cables and plugs and make sure that
14 of 64
Page 15
connectors are the right way round.
Do not crush or bend the cable too far in
order to prevent short-circuit and cable
break.
Maintain a distance of at least one
metre from sources of high-frequency
and magnetic interference (TV sets,
loudspeakers, mobile phones, DECT
telephones, etc.) in order to avoid
malfunctions and data loss.
Do not connect any devices to the
product which do not meet the
requirements set out in the EN60950
standard “Information Technology
Equipment – Safety” or the EN60065
standard “Audio, video and similar
electronic apparatus - Safety
requirements”.
15 of 64
Page 16
2.3. Cleaning and care
Follow the instructions below to increase
the service life of the product:
Always unplug the device and disconnect
all cables before cleaning.
Do not use solvents, corrosive agents or
aerosol-based detergents to clean the
device.
Use appropriate cleaners to wipe the
display, e.g. glass cleaners or monitor
cleaners (available from specialist
retailers).
Clean the screen with a soft, lint-free
cloth.
Do not place the screen in strong sunlight
or near ultraviolet light.
Make sure that no water droplets
remain on the device. Water can cause
permanent discolouration.
Store the packaging material in a safe
place; always use this to transport the
device.
16 of 64
Page 17
2.4. Data backup
PLEASE NOTE!
Loss of data!
Back up your data to external
storage media before each update.
We do not accept any liability
for claims for compensation
arising from loss of data or any
consequential loss or damage.
2.5. Information about the display
Do not place any objects on top of the
device and do not exert pressure on the
screen. This could break the screen.
To avoid damaging the screen, do not
touch it with sharp objects.
If the screen breaks, there is a danger
of injury. If this happens, pick up the
shattered pieces wearing protective
gloves and send them to your service
centre for professional disposal. Finally,
wash your hands with soap, as the pieces
may have been contaminated with
17 of 64
Page 18
chemicals.
Keep the device away from moisture and
from water in droplet or spray form. Avoid
knocks, dust, heat and direct sunlight in
order to prevent malfunction.
2.6. Notes on batteries and
rechargeable batteries
WARNING!
Risk of explosion!
There is a risk of explosion if the
battery is replaced incorrectly.
Charge the battery regularly and as
fully as possible. Do not leave the
battery discharged for long periods
Keep batteries away from heat
sources such as radiators or open
flames, e.g. candles. There is a risk
of explosion!
18 of 64
Page 19
If the device cannot be switched on
although it is connected to a power
source, please contact your service centre.
Do not use chargers or batteries that are
damaged in any way.
Do not dismantle or deform batteries.
You could injure your hands or fingers,
or battery fluid could come into contact
with your eyes or skin. If this happens,
rinse the affected areas with plenty of
clean water and contact your doctor
immediately.
Keep the batteries away from children.
If batteries are accidentally swallowed,
consult your doctor immediately.
If the battery is integrated into the device,
it cannot be readily replaced by the user
themselves.
19 of 64
Page 20
2.7. Environmental requirements
Keep your telephone dry.
Do not expose it to extremes of
temperature (hot or cold).
Do not place your phone next to burning
cigarettes, open flames or other heat
sources.
Do not drop or bang the telephone and
do not shake it. Rough handling can
damage the internal circuitry.
Do not paint your telephone as the paint
could block the microphone, the ear
piece or hinder moving parts and thus
prevent normal use.
Treat your telephone carefully and store it
in a clean and dust-free location.
Under no circumstances attempt to
open the telephone or battery. Any
modification to the device is prohibited
and will invalidate the guarantee.
20 of 64
Page 21
The ring tone is played back via the ear
piece. To avoid damage to hearing, accept
the call before putting the telephone to
your ear.
Please only use the optional stereo
earphones together with this
smartphone.
PLEASE NOTE!
When using wired headsets, ensure
the correct plug connection (see
technical details).
2.8. In the event of faults
If the charger, connection cable or device
is damaged, immediately disconnect the
charger from the power supply.
Never try to open and/or repair the
device or the charger yourself. In the
event of a fault, contact our Service
Centre or another suitable professional
repair workshop.
21 of 64
Page 22
2.9. People with pacemakers
When using your telephone, be sure to
maintain a safety distance of at least 15 cm
from your implanted pacemaker to avoid
any possibility of interference.
Do not carry the telephone in a breast
pocket when it is switched on. Hold the
telephone to the ear on the opposite side
to your pacemaker to avoid any possible
adverse effects.
Switch off the telephone immediately if you
suspect any adverse effects.
2.10. People with hearing aids
If you use a hearing aid, ask your doctor or
the manufacturer of the hearing aid about
any possible adverse effects caused by radio
waves.
2.11. Emergency calls
This telephone uses radio signals, wireless
and land-based networks, as well as
functions programmed by the user. Because
22 of 64
Page 23
of this, a connection cannot be guaranteed
under all possible circumstances. Therefore,
you should not rely exclusively on
telephones for essential communication
(e.g. in medical emergency situations).
Emergency calls may not be possible on
some mobile networks or while certain
network services and/or telephone
functions are being used. Contact your local
network operator.
23 of 64
Page 24
2.12. Saving a number for use in
emergencies
If you are involved in an accident or injured
and have your mobile phone with you, it
is important for the emergency services to
be able to inform a close friend or family
member. Often, it is not immediately
apparent to rescue workers which contact
in the mobile phone directory should be
called.
Therefore an international abbreviation
has been developed to allow emergency
services to quickly inform one or more
people of an event.
Save a contact under the name ICE (“in case
of emergency”) for this purpose. If more
than one person is to be notified, you can
use ICE1, ICE2, and so on.
24 of 64
Page 25
3. Contents of package
Please check your purchase to ensure all items are
included and contact us within 14 days of purchase if the
delivery is incomplete.
The product you have purchased includes the following
items:
• Smartphone
• Battery
• Mains charging device
• USB data and charger cable
• Stereo headset (optional)
• Manual with safety information
• Guarantee documents
DANGER!
Risk of suffocation!
Packaging film can be swallowed or
used improperly. Therefore, there is
a risk of suffocation!
Keep packaging material such as
plastic film or plastic bags away
from children.
25 of 64
Page 26
3.1. Overview of the device
-+
26 of 64
Page 27
4. Preparations for using the
telephone
You must insert a SIM card and charge the battery before
you can use the telephone.
4.1. SIM card
You choose the network provider, telephone network and
tariff when purchasing a SIM card.
Therefore, check out which tariff from which network
provider is best suited to your telephone usage before
purchasing the SIM card.
You will also receive your telephone number with the SIM
card. Furthermore, SIM cards can also feature additional
memory functions (e.g. for the telephone book or SMS
messages)
Store all SIM cards out of the reach of small children.
Handle your SIM card carefully because the card and
its contact points can be easily damaged through
scratching or bending.
27 of 64
Page 28
4.2. Inserting cards
PLEASE NOTE!
Always ensure that the telephone is
switched off when carrying out this
process to avoid any damage to the
device or the card.
Open the battery compartment cover and remove the
battery if necessary.
Slide the SIM cards and the microSD card into the
corresponding slots as illustrated.
SIM 2
SIM 1
28 of 64
Page 29
4.3. Inserting the battery
Remove the battery compartment cover if you have
not already completed this step.
Before installing the battery, firstly insert the SIM cards
and, if desired, a microSD card as described in the
previous sections.
Insert the battery into the battery compartment. The
contacts on the battery must touch the corresponding
contacts on the telephone.
4.4. Charging the battery
PLEASE NOTE!
The battery can be charged
regardless of whether the SIM card
is inserted.
Insert the micro USB plug in the corresponding
connector on the phone. Ensure that the plug is
inserted in the connector the right way round. Do not
force it.
Insert the other end of the cable into the USB
connection on your computer or use the supplied
mains charger.
Connect the charger to an easily accessible mains
socket.
29 of 64
Page 30
5. Operation
5.1. Switching on the telephone
Hold the on/off button down until the display
switches on.
Enter the 4 to 8-digit PIN code for each inserted SIM
card and confirm them with .
If you have entered a wrong digit, tap on X.
5.2. Operating the telephone
You operate the the phone with your fingertips. Do not
use any pointed or sharp-edged objects.
Tap on the display to select apps or to open
applications.
If you hold down your finger on an input field, all of
the available options will be displayed.
Drag your finger over the display to move it up, down,
right or left.
If you press and hold an app, you can drag it across the
display and place it in another position or delete it.
Drag two fingers apart on the screen at the same time
or tap twice on the display in order to increase/reduce
the size of a website.
30 of 64
Page 31
5.3. After switching on the
telephone
You can use various applications from the Google™
portfolio on your phone. To do this, you will generally
require a Google™ account. This account will allow you to
access a larger number of services such as Google Mail™.
6. First use
When you first switch on your phone, make the following
settings:
Select the language and tap on .
Follow the on-screen instructions to conclude the
initial setup for your smartphone.
31 of 64
Page 32
PLEASE NOTE!
You can view the display in portrait
or landscape format. Simply hold
the telephone upright or on its side
to change the orientation of the
display.
An Internet connection is required
in order to create a Google™
account or to sign in. You can
connect to the Internet either via
your SIM card or a Wi-Fi connection.
Please bear in mind that costs
may be incurred for the Internet
connection especially when the
connection is via your mobile
phone service provider if you do
not have a flat rate contract.
32 of 64
Page 33
6.1. Switching off the phone
Press and hold the on/off button until the selection
menu appears with the following options:
Power off
(switches the phone completely off)
Reboot
(restarts the phone).
Screenshot
(creates an image of the current screen contents)
Airplane mode
(switches the phone to airplane mode)
Silent
(switches the phone to silent mode)
Vibration
(switches the phone to vibration mode)
Sounds
(activates all acoustic signals on the telephone)
PLEASE NOTE!
If contrary to expectations the
operating system does not
respond, you may have to force
the mobile phone to switch off. To
do so, hold the on/off button for
approx. 8 seconds
33 of 64
Page 34
6.2. Switching to sleep mode
In sleep mode, your device will be placed into a
low-energy standby mode with the display turned off in
order to save battery power. Your device also switches
automatically into sleep mode if the display is switched
off after a certain time.
You can set this time under Settings / Display / Sleep.
Press the ON/OFF button to switch to sleep mode.
6.3. Waking up the phone from sleep
mode
This is the standard setting and can be changed in the
menu.
Press the on/off button to reactivate the display.
Drag the symbol upwards to unlock the
smartphone.
Swipe your finger to the right to open the telephone
function.
Swipe your finger to the left to open the camera
function.
34 of 64
Page 35
6.4. Main screen
You decide what is displayed on your start screen. Set
your own background, add shortcuts for the widgets or
apps you require or remove them if desired.
1
2
3
10
9
(image similar)
4 5 6 7 8
45
8
35 of 64
Page 36
Status and notifications
1
Google input window
2
Installed apps
3
Telephone function
4
Contact list
5
Main menu
6
SMS/MMS menu
7
Web browser
8
Voice entry
9
Network/battery/date display
10
36 of 64
Page 37
6.5. Status and notifi cation symbols
Your phone uses simple icons to provide you with status
updates. The meanings of the individual icons are as
follows:
G GPRS in use No signal
E EDGE in use Signal strength,
3G 3G in use GPS active
H HSDPA in
use
USB connection Alarm has been set
Battery very weak Connection to Wi-Fi
Battery almost
empty
Battery is weak Loudspeaker on
Call is being recorded
network
Bluetooth on
37 of 64
Page 38
Battery fully
charged
Batteries
Problem with the
delivery of an SMS/MMS
New instant message
charging
Synchronisation Outstanding event
Vibration mode
Airplane mode Song playback
Silent Playback via the
connected/paired
headset
New SMS/MMS/
Downloading data
voice mail
New Google Mail
USB tethering is enabled
message
Missed call Mobile Wi-Fi hotspot is
enabled
Establishing
Call is being held
connection
Call is active Microphone off
38 of 64
Page 39
6.6. Using the notifi cation fi eld
(image similar)
Swipe your finger from the top downwards over the
status bar to open the notification field that displays your
calendar events, new messages and current settings such
as call forwarding or call status. In addition, you can open
messages, reminders etc. from here. Press to open the
quick settings menu.
39 of 64
Page 40
6.7. Favourites list
4
3
1
2
2
1
Start call
Contacts
Access to all contacts on your mobile phone
Open main menu
3
SMS/MMS messages
4
Open Internet browser
5
5
40 of 64
Page 41
6.8. Telephone calls
When you accept or make a call with a new SIM card for
the first time, you must first select the standard SIM card.
Set the standard SIM or activate the Always ask function
to be asked each time you open the phone’s notification
centre.
Tap on the telephone icon on the home screen.
Now tap on and enter a telephone number.
Tap on to start dialling.
It is also possible to make a call from the contact list, call
list or a text message.
6.8.1. Accepting calls
Drag the telephone receiver symbol onto the green
telephone receiver symbol.
6.8.2. Rejecting calls
Drag the telephone receiver symbol onto the red
telephone receiver symbol.
6.8.3. Rejecting a call with an SMS
Drag the telephone receiver symbol onto the SMS/
MMS symbol.
41 of 64
Page 42
6.8.4. Contacts
You can save contacts on your telephone memory or
your SIM card. More information about a contact can be
saved on the telephone memory than on the SIM card.
For example, addresses, photos, nicknames, websites and
much more
When you open the contacts for the first time with a new
SIM card, you must first select the standard SIM card.
Set the standard SIM or activate the Always ask function
to be asked each time you open the contacts.
You can call up your contacts by tapping on
(Contacts).
The contacts screen contains the following tabs:
Contacts, Favourites and Groups.
6.9. SMS/MMS
Under SMS/MMS, you have access to your short
messages (SMS) or multimedia messages (MMS).
You can send or receive SMS or MMS messages.
42 of 64
Page 43
If you receive a new message, you can open it via the
notification field or the message screen. Simply tap on the
new message to read it.
When you write or read an SMS/MMS with a new SIM card
for the first time, you must first select the standard SIM
card.
Set the standard SIM or activate the Always ask
function to be asked each time you open the SMS/MMS
notification centre.
6.9.1. Writing a new message
Tap on (SMS/MMS).
Tap on .
Enter the number or name of the recipient.
Corresponding contacts will be suggested during
input. Tap on the suggested contact to add it as a
recipient.
Tap on Type message and then enter your message.
Tap on to send your text message.
If you want to add an attachment to a text message,
tap on and select the relevant attachment. The
SMS will then be automatically converted into an MMS
message.
43 of 64
Page 44
7. Connecting to the Internet
You can use the standard connection settings to access
the Internet via your mobile phone network or use your
Wi-Fi connection.
In order to access the Internet via the mobile data
network, this service must be active in your contract.
PLEASE NOTE!
Read the chapter “Internet“
carefully to avoid unnecessarily
high mobile phone bills.
Also contact your mobile phone service provider if the
settings for accessing the mobile data network provided
by your service provider are not preconfigured on your
telephone. If you change the settings without consulting
your mobile phone service provider then it may be
possible that your telephone will then no longer function
correctly.
44 of 64
Page 45
7.1. Adding a new data network
connection
Your telephone is preconfigured for accessing the Internet
via most European mobile phone service providers.
If it is nevertheless necessary for you to add a new data
network connection, first ask your mobile phone service
provider for the following information.
• Name of the access point (APN)
• If necessary, the user name and password.
• Server IP and port number, if the network uses a proxy
server.
Tap on on the main screen.
Tap on Settings / More... / Mobile networks / Access
point Names.
Press the menu key and tap on New APN.
Tap on Name to enter the name of your access point
(freely selectable).
Tap on APN to enter the APN that you want to add.
Tap on Proxy and Port to enter the server IP and port
if the network uses a proxy server.
Tap on Username and Password and enter the
required information in each case. (If there are no user
names and passwords, leave these fields blank.)
If required, tap on APN type.
Press the menu key and tap on Save to conclude the
process.
45 of 64
Page 46
PLEASE NOTE!
In order to set the APN to the
default settings, press the Menu
key and tap on Reset to default.
7.2. Additional costs for Internet
and roaming usage
Significant volume-based data costs may apply when
using the mobile Internet. In order to limit these costs, we
recommend that you purchase a contract with an Internet
flat rate.
Find out about the various options available from your
mobile phone service provider. Also ask about the tariffs
for using your telephone abroad (roaming) because this
can also result in high charges.
PLEASE NOTE!
When you use the telephone for
the first time, data roaming (use
of data services in a different data
network than your own home
network provided by your mobile
phone service provider e.g. abroad)
is deactivated.
46 of 64
Page 47
Check your mobile service tariff before using the device
and, if required, switch off mobile data services until you
have activated a suitable Internet flat rate. Proceed as
follows:
7.3. Internet
Volume-based data costs may apply when using the
mobile Internet. Check your mobile service tariff before
using the device and, if required, switch off mobile data
services until you have activated a suitable Internet flat
rate. Proceed as follows:
Tap on .
Now tap on Settings / More...
Now tap on Mobil networks / Data roaming in
sequence.
7.4. Limiting data usage
The telephone has an automatic function for limiting
mobile data usage. If the value you have set is exceeded
then the data connection is deactivated.
Tap on .
Now tap on Settings / Data usage.
Now select whether you want to set data usage via the
Mobile network or Wi-Fi.
47 of 64
Page 48
PLEASE NOTE!
The time period for displaying the
monthly data usage can be defined
under the option Data usage cycle.
Select the date for resetting the
data usage cycle.
Tap on Set to save the date.
7.5. Changing the data volume
As current mobile phone contracts offer Internet flat rates
with different data usage limits, it is advisable to define
the data usage limit for your mobile phone contract in the
data usage limit function on your telephone.
For example, if your monthly internet flat rate has a max.
limit of 1 GB, set the red line (limit) to 1 GB.
Set the yellow line (warning) to a lower value.
Tap on the table and drag the red line (limit) to 1 GB.
Now drag the yellow line (warning) to a lower value.
Tap on Set limit to activate data usage monitoring.
48 of 64
Page 49
7.6. Activating Wi-Fi
Wi-Fi provides you with access to the Internet over a
distance of several metres.
Tap on
Tap on Settings / Wi-Fi.
Activate the Wi-Fi checkbox to switch on this function.
The name of all of the Wi-Fi networks available for your
telephone and their security settings (open or secure)
will now be displayed.
Tap on a network to which you want to connect.
Press the menu button and tap on scan to update the
list of available networks in your local area.
on the main screen.
PLEASE NOTE!
If you attempt to make a
connection to a secure network,
you will be required to enter a
password to gain access.
49 of 64
Page 50
8. Addendum to instructions
for use of smartphone
8.1. Exposure to radio frequency
energy
Your smartphone has been tested and complies with the
RF exposure limits prescribed by the European Union in
connection with cellular networks, Wi-Fi and Bluetooth.
The expression “Specific Absorption Rate”, or SAR for
short, refers to the amount of RF energy absorbed by the
human body.
The maximum SAR limit (Specific Absorption Rate) for
mobile telephones approved by the Council of the
European Union is 2.0 W / kg.
Maximum levels applicable to this model:
SAR (head): 0.375 W / kg
SAR (body): 0.624 W / kg / 15mm
The telephone has been tested and conforms to the
directives on SAR exposure in terms of operation of
cellular networks, Wi-Fi and Bluetooth.
Your telephone is fitted with radio transmitters and
receivers. When it is lit up, your smartphone is sending
and receiving radio frequency (RF) energy via its antenna.
50 of 64
Page 51
9. Disposal
DEVICE
The device is fitted with an integrated battery. At
the end of its operating life, do not dispose of the
device with your ordinary household rubbish.
Consult your local authority to find out about
collection centres for environmentally sound
disposal of electrical and electronic scrap.
BATTERIES
Used batteries do not belong in the household
rubbish. They should be taken to a collection
point for used batteries.
PACKAGING
Your device has been packaged to protect it
against transportation damage. The packaging is
made of environmentally friendly material which
can be recycled.
www.recyclenow.com
SLEEVE TRAY FILM
CARD
widely
recycled
PLASTIC
check local
recycling
PLASTIC
not currently
recycled
51 of 64
Page 52
10. Conformity information as
per R&TTE
This device is supplied with the following wireless
features:
• Wireless LAN
• Bluetooth
Medion AG hereby declares that the product conforms to
the following European requirements:
• R&TTE Directive 1999/5/EC
• Ecodesign Directive 2009/125/EC
• RoHS Directive 2011/65/EU.
Full declarations of conformity are available at http://
www.medion.com/conformity.
Use is only permitted inside buildings in all EU countries
due to the 5 GHz frequency band of the inbuilt Wireless
LAN solution.
52 of 64
1313
Page 53
11. Technical data
74 x 146 x 9,8 mm ~ 155g
2.91 x 5.74 x 0.38 inch ~ 5.46 oz
Aquil Star Precision Industrial,
China (Shenzhen)
ASSA55e(b)-050200 EU/UK
Input: 100 -240V ~ 0,45A max./
max. 50-60Hz
Output: 5V 2.0 A
Ktech Co., Ltd.,
China (Shenzhen)
KSA29B0500200HK
Input: 100 -240V ~ 0,5A max./
max. 50-60Hz
Output: 5V 2.0 A
Ktech Co., Ltd.,
China (Shenzhen)
KSAS0050500100VKU/VEU
Input: 100 -240V ~ 0,18A max./
max. 50-60Hz
Output: 5V 1.0 A
53 of 64
Page 54
Shenzhen XinShend Tong Technology Co., Ltd.
China (Shenzhen)
Modell:
L503A395468P
WLAN: IEEE 802.11b/g/n (2.4 GHz)
Bluetooth 4.0
GSM 850/900/1800/1900 Mhz
UMTS 900/2100 Mhz
LTE Cat-4 800/1800/2600 Mhz
12,7 cm / 5“
854 x 480 Pixel
+5°C - +35°C
MAX.
ON
MIN.
41°F - 95°F
OFF
MAX.
0°C - +60°C
MIN.
32°F - 140°F
10 - 90%
3,5mm, CTIA
54 of 64
2,0MP Front
5,0 MP Main
Page 55
12. Licence information
This product is based in part on open source software
the use of which is subject to the GNU General Public
License (GPL) Version 2. This goes hand in hand with a
commitment on the part of the manufacturer to make the
corresponding source code that may have been modified
also available under this licence. You can acquire the
source code for this product in the following manner:
1) Visit MEDION Service at http://www.medion.
com/de/service/start and enter the name, the MD
number or the MSN number of your device in the
search field. You will find these details on the rear
of your device. In the window that appears next,
select the category “Software”.
2) Alternatively, we can send you the source code for
free on a data medium. Please send an e-mail to
this effect to opensource@medion.com.
Please note that the source code is only of interest to
software developers. As a pure user of the product, you
would normally have no use for the source code.
You will find the complete text of the GPL below as well
as on the device under Settings/About the phone/Legal
information. Further information about the GPL as well as
official translations in various languages can be found at
http:///www.fsf.org/licensing.
55 of 64
Page 56
GNU General Public Licence
Version 2, June 1991
Copyright (C) 1989,
1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston,
MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom
to share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free software-
-to make sure the software is free for all its users. This General Public
License applies to most of the Free Software Foundation‘s software
and to any other program whose authors commit to using it. (Some
other Free Software Foundation software is covered by the GNU Lesser
General Public License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price.
Our General Public Licenses are designed to make sure that you have
the freedom to distribute copies of free software (and charge for this
service if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone
to deny you these rights or to ask you to surrender the rights. These
restrictions translate to certain responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis
or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And
you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author‘s protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software.
56 of 64
Page 57
If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any
problems introduced by others will not reflect on the original authors‘
reputations.
Finally, any free program is threatened constantly by software patents.
We wish to avoid the danger that redistributors of a free program
will individually obtain patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that any patent must
be licensed for everyone‘s free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The “Program”, below,
refers to any such program or work, and a “work based on the Program”
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either
verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term
„modification“.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of running
the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether
that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source
code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright
notice and disclaimer of warranty; keep intact all the notices that refer
to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you
may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of
57 of 64
Page 58
it, thus forming a work based on the Program, and copy and distribute
such modifications or work under the terms of Section 1 above,
provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating
that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole
or in part contains or is derived from the Program or any part thereof, to
be licensed as a whole at no charge to all third parties under the terms
of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such interactive
use in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no
warranty (or else, saying that you provide a warranty) and that users
may redistribute the program under these conditions, and telling the
user how to view a copy of this License. (Exception: if the Program itself
is interactive but does not normally print such an announcement, your
work based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works
in themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the entire
whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your
rights to work written entirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or collective works based
on the Program.
In addition, mere aggregation of another work not based on the
Program with the Program (or with a work based on the Program) on a
volume of a storage or distribution medium does not bring the other
work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
58 of 64
Page 59
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections 1
and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to
give any third party, for a charge no more than your cost of physically
performing source distribution, a complete machine-readable copy
of the corresponding source code, to be distributed under the terms
of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
c) Accompany it with the information you received as to the offer to
distribute corresponding source code. (This alternative is allowed only
for noncommercial distribution and only if you received the program
in object code or executable form with such an offer, in accord with
Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control
compilation and installation of the executable. However, as a special
exception, the source code distributed need not include anything that
is normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
If distribution of executable or object code is made by offering access to
copy from a designated place, then offering equivalent access to copy
the source code from the same place counts as distribution of the source
code, even though third parties are not compelled to copy the source
along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt otherwise
to copy, modify, sublicense or distribute the Program is void, and will
automatically terminate your rights under this License. However, parties
who have received copies, or rights, from you under this License will
not have their licenses terminated so long as such parties remain in full
compliance.
59 of 64
Page 60
5. You are not required to accept this License, since you have not signed
it. However, nothing else grants you permission to modify or distribute
the Program or its derivative works. These actions are prohibited by law
if you do not accept this License. Therefore, by modifying or distributing
the Program (or any work based on the Program), you indicate your
acceptance of this License to do so, and all its terms and conditions for
copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the original
licensor to copy, distribute or modify the Program subject to these terms
and conditions. You may not impose any further restrictions on the
recipients‘ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
7. If, as a consequence of a court judgement or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.
If you cannot distribute so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a
consequence you may not distribute the Program at all. For example,
if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through
you, then the only way you could satisfy both it and this License would
be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents
or other property right claims or to contest validity of any such claims;
this section has the sole purpose of protecting the integrity of the free
software distribution system, which is implemented by public license
practices. Many people have made generous contributions to the
wide range of software distributed through that system in reliance on
consistent application of that system; it is up to the author/donor to
decide if he or she is willing to distribute software through any other
system and a licensee cannot impose that choice.
60 of 64
Page 61
This section is intended to make thoroughly clear what is believed to be
a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain
countries either by patents or by copyrighted interfaces, the original
copyright holder who places the Program under this License may add an
explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
9. The Free Software Foundation may publish revised and/or new
versions of the General Public License from time to time. Such new
versions will be similar in spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and “any
later version”, you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number
of this License, you may choose any version ever published by the Free
Software Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the
author to ask for permission. For software which is copyrighted by the
Free Software Foundation, write to the Free Software Foundation; we
sometimes make exceptions for this. Our decision will be guided by
the two goals of preserving the free status of all derivatives of our free
software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS
NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
61 of 64
Page 62
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO
IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO
MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF
THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT
LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH
HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
END OF TERMS AND CONDITIONS
LGPL VERSION 2.1
13. Legal notice
Copyright © 2016
All rights reserved.
This operating manual is protected by copyright.
Mechanical, electronic and any other form of
reproduction is prohibited without the written permission
of the manufacturer
Copyright is owned by the company:
Medion AG
Am Zehnthof 77
45307 Essen
Germany
The operating manual can be reordered via the service
hotline and is available for download via the service
portal at www.medion.com/gb/service/start/.
62 of 64
Page 63
14. Index
C
Cleaning and care ................................................................. 16
Connecting to the Internet ................................................ 44
D
Data backup ............................................................................ 17
Data volumes .......................................................................... 48
E
Emergency calls ..................................................................... 22
Environmental requirements ............................................ 20
F
Faults .......................................................................................... 21
H
Hearing aids ............................................................................ 22
I
Information about the display .......................................... 17
Internet ..................................................................................... 47
L
Licence information.............................................................. 55
N
Notes on lithium-ion batteries ......................................... 18
P
Package contents .................................................................. 25
People with pacemakers..................................................... 22
63 of 64
Page 64
R
Roaming ..................................................................................... 8
S
Safety instructions .................................................................. 9
SIM card .................................................................................... 27
SMS/MMS ................................................................................. 42
W
Wi-Fi ............................................................................................ 49
64 of 64
Loading...