Self-Contained
Solid Door PassThru Refrigerators
Aluminum interior and
•
exterior, stainless front
and back
Built in door locks with
•
heavy duty strikes
Low profile metal door
•
handle
Pressure relief valve is
•
standard to prevent door
vapor lock
Exterior digital
•
thermometer
Easy to use
•
electromechanical
control
MCCRPT2-S
Key lock shroud for easy
•
access to refrigeration
system
Three epoxy coated wire
•
shelves per section
Tough ABS interior door
•
liners
10’ attached cord and
•
plug
6” polyurethane casters
•
standard
High density foamed in
•
place environmentally
friendly, Kyoto Protocol
Compliant, Non ODP
(Ozone Depletion
Potential), Non GWP
(Global Warming
Potential) polyurethane
keeps energy costs low
Energy savings door
•
heater switch
One year parts & labor
•
warranty
Five year compressor
•
warranty
Self-Contained Solid Door Pass-Thru Refrigerators
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
75.00”
190.5cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
56.00
34.00
83.00
34.00
31.00"
78.7cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
206.0cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
75.00”
190.5cm
29.00”
73.7cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
36.25”
92.1cm
36.25”
92.1cm
Specifications
MODEL VOLTAGE AMPS STORAGE CU.FT. SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
MCCRPT1-S, MCCRPT1-SH 115 6.8 26.64 12.81 3 1/4 2092
MCCRPT2-S, MCCRPT2-SH 115 16.0 55.42 27.54 6 1/2 5465
Specifications
Exterior: Models shall have corrosion resistant
aluminum on exterior cabinet sides and will have
stainless front and rear shrouds.
Interior: Cabinet interior shall be corrosion resistant
heavy gauge aluminum. Bottom and top surfaces shall
be die stamped to provide radius corners and recessed
floor. Three epoxy coated wire shelves are provided per
section. Shelves rest on clips which are adjustable on
1” increments on stainless steel pilasters affixed to the
cabinet interior. Pilasters are removable without tools
for cleaning. Mounted to the interior ceiling, the interior
incandescent light is controlled automatically through a
switch mounted in the hinge assembly to protect against
breakage. An air duct shall be mounted to the ceiling
assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Exterior shall be corrosion resistant stainless
steel. Interior liner is a resilient high impact, easily
cleanable ABS material. Each door has two edge
mount, self closing, cam lift style hinges. Doors can be
removed from the cabinet without the use of tools. Metal
door handle is a low profile design minimizing impact
with aisle space. Keyed door lock is mounted in the
door next to the handle. Lock engages into a heavy duty
strike mounted to the cabinet face. Door gaskets are
magnetic and mount to the door snapping in place and
are removable without tools.
Refrigeration system: All components are mounted
to the exterior of the cabinet ceiling, outside the food
zone and are assembled as one piece and can be
removed as one piece. Environmentally friendly R404A
refrigerant is used. The system has the capability of
maintaining between 27ºF and 40ºF in heavy use food
service operations. Refrigerant is metered using a highly
responsive thermostatic expansion valve. System is
controlled using an electronic temperature control, which
provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy
consumption.
Control system uses adaptive defrost to assure
evaporator coil is free of ice and is operating at optimum
efficiency. Evaporator condensate is eliminated using an
energy efficient hot gas system.
Electrical: Standard electrical connections shall be
115V, 60 Hz single phase. A 10’ cord and plug is
supplied and attached to a junction box mounted on the
exterior top of the cabinet.
Casters: Units are standard with 6” high polyurethane
casters.
PLAN VIEW
MCCRPT1-S, MCCRPT1-SH
ELEVATION VIEW
MCCRPT1-S
ELEVATION VIEW
MCCRPT1-SH
PLAN VIEW
MCCRPT2-S, MCCRPT2-SH
ELEVATION VIEW
MCCRPT2-S
BTU/HR
SYSTEM CAP
ELEVATION VIEW
MCCRPT2-SH
SHIP WEIGHT NEMA PLUG ENERGY (KWH)
455lbs
(206kg)
700lbs
(318kg)
5-15P 3.14
5-20P 5.96
END VIEW
ALL MODELS
McCall reserves the right to make changes to the
design or specifications without prior notice.
McCall Refrigeration
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 888-732-2446
Fax: 800-669-0619
www.mccallrefrigeration.com
DSMCCRPT ©2010 McCall 05/10
Loading...