Self-Contained
Solid Door Reach-In
Refrigerators
Aluminum interior and
•
exterior, stainless front
Built in door locks with
•
heavy duty strikes
Low profile metal door
•
handle
Pressure relief valve is
•
standard to prevent door
vapor lock
Exterior digital
•
thermometer
Easy to use
•
electromechanical
control
MCCR2-S
Key lock shroud for easy
•
access to refrigeration
system
Three epoxy coated wire
•
shelves per section
Tough ABS interior door
•
liners
10’ attached cord and
•
plug
6” polyurethane casters
•
standard
High density foamed in
•
place environmentally
friendly, Kyoto Protocol
Compliant, Non ODP
(Ozone Depletion
Potential), Non GWP
(Global Warming
Potential) polyurethane
keeps energy costs low
Energy savings door
•
heater switch
One year parts & labor
•
warranty
Five year compressor
•
warranty
Self-Contained Solid Door Reach-In Refrigerators
30"
58"
6.12
81.12
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
30.00"
76.2cm
58.00"
147.3cm
6.12”
15.5cm
81.12”
205.0cm
29.00
34.00
56.00
34.00
83.00
34.00
75.00”
190.5cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
56.00
34.00
83.00
34.00
83.00
34.00
83.00”
210.8cm
79.00"
200.7cm
34.00”
86.4cm
29.00”
73.7cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
25.00"
63.5cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
48.00”
121.9cm
44.00"
111.8cm
34.00”
86.4cm
56.00”
142.2cm
83.00”
210.8cm
52.00"
132.1cm
79.00"
200.7cm
34.00”
86.4cm
34.00”
86.4cm
83.00”
210.8cm
79.00"
200.7cm
34.00”
86.4cm
6.12”
15.5cm
81.12”
206.0cm
75.00”
190.5cm
58.00”
147.3cm
30.00”
76.2cm
Specifications
MODEL VOLTAGE AMPS STORAGE CU.FT. SHELVES SQ.FT. NO. OF SHELVES UNIT H.P.
MCCR1-S, MCCR1-SH 115 6.8 24.96 12.81 3 1/4 2092
MCCR2-S, MCCR2-SH 115 9.0 51.92 27.54 6 1/3 3226
MCCR3-S, MCCR3-SH 115 16.0 78.89 42.47 9 1/2 5465
Specifications
Exterior: Models shall have corrosion resistant aluminum
on exterior cabinet sides and will have stainless front and
shroud.
Interior: Cabinet interior shall be corrosion resistant
heavy gauge aluminum. Bottom and top surfaces shall
be die stamped to provide radius corners and recessed
floor. Three epoxy coated wire shelves are provided per
section. Shelves rest on clips which are adjustable on 1”
increments on stainless steel pilasters affixed to the cabinet
interior. Pilasters are removable without tools for cleaning.
Mounted to the interior ceiling, the interior incandescent
light is controlled automatically through a switch mounted
in the hinge assembly to protect against breakage. An air
duct shall be mounted to the ceiling assuring low velocity,
even air movement throughout the cabinet interior.
Doors: Exterior shall be corrosion resistant stainless steel.
Interior liner is a resilient high impact, easily cleanable ABS
material. Each door has two edge mount, self closing,
cam lift style hinges. Doors can be removed from the
cabinet without the use of tools. Metal door handle is a low
profile design minimizing impact with aisle space. Keyed
door lock is mounted in the door next to the handle. Lock
engages into a heavy duty strike mounted to the cabinet
face. Door gaskets are magnetic and mount to the door
snapping in place and are removable without tools.
Refrigeration system: All components are mounted
to the exterior of the cabinet ceiling, outside the food
zone and are assembled as one piece and can be
removed as one piece. Environmentally friendly R404A
refrigerant is used. The system has the capability of
maintaining between 27ºF and 40ºF in heavy use food
service operations. Refrigerant is metered using a highly
responsive thermostatic expansion valve. System is
controlled using an electronic temperature control, which
provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy
consumption.
Control system uses adaptive defrost to assure evaporator
coil is free of ice and is operating at optimum efficiency.
Evaporator condensate is eliminated using an energy
efficient hot gas system.
Electrical: Standard electrical connections shall be
115V, 60 Hz single phase. A 10’ cord and plug is supplied
and attached to a junction box mounted on the exterior
top of the cabinet.
Casters: Units are standard with 6” high polyurethane
casters.
PLAN VIEW
MCCR1-S, MCCR1-SH
ELEVATION VIEW
MCCR1-S
ELEVATION VIEW
ELEVATION VIEW
MCCR3-S
MCCR1-SH
PLAN VIEW
MCCR2-S, MCCR2-SH
ELEVATION VIEW
MCCR2-S
BTU/HR
SYSTEM CAP
ELEVATION VIEW
MCCR2-SH
ELEVATION VIEW
MCCR3-SH
SHIP WEIGHT NEMA PLUG ENERGY (KWH)
418lbs
(190kg)
650lbs
(295kg)
830lbs
(376kg)
MCCR3-S, MCCR3-SH
PLAN VIEW
5-15P 2.64
5-15P 4.51
5-20P 5.51
END VIEW
ALL MODELS
McCall reserves the right to make changes to the
design or specifications without prior notice.
McCall Refrigeration
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 888-732-2446
Fax: 800-669-0619
www.mccallrefrigeration.com
DSMCCR ©2010 McCall 05/10
Loading...