McCall MCCFES-94 User Manual

Self-Contained
Low-Profile Freezer
Equipment Stands

Top is heavy duty stainless

•
steel, with full perimeter
retainer bracket

Standard aluminum ends

•

Exterior drawer fronts are

•
stainless steel

High density environmentally

•
friendly, Kyoto Protocol
Compliant, Non ODP (Ozone
Depletion Potential), Non GWP
(Global Warming Potential)
polyurethane foam insulation
throughout unit

Snap-in drawer gaskets for

•
easy removal

Mounted on 6” casters

•

8’ cord and plug supplied

•

MCCFES-60

Base interior cabinet is

•
cooled with mullion style
coated blower coil(s) mounted
between each door/drawer
section for even air and
temperature control

Dial thermometer

•

Electric condensate

•
evaporators are standard

Wall-mounted bracket to

•
prevent tipping

Full Extension Plus Drawer

•
system is a complete drawer
system. Drawer system is
sized to hold 12” x 20” x 4”
deep hotel pans (by others).
The drawer system is all

stainless steel construction for
maximum durability

Base cabinet will maintain 0º

•
to -5º temperatures at 100º
ambient room temperature
meeting NSF7 requirements

When ordering, specify make,

•
model and depth of cooking
equipment sitting on the
equipment stand

Height of surface for setting

•
equipment is 25.50”

Standard with a defrost timer

•

Environmentally friendly HFC-

•
404A refrigerant

One year parts and labor

•
standard warranty

Low-Profile Freezer Equipment Stands

60.25”
153cm

42.13”
107cm

18.13”
46cm

30.94”
79cm

Elevation View

MCCFES-60

Plan View

MCCFES-60

32" Freezer Drawer

Full Extension

32" Freezer Drawer

Full Extension

70.13”
178cm

94.25”
239cm

30.94”
79cm

24.13”
61cm

Elevation View

MCCFES-94

Plan View

MCCFES-94

32" Freezer Drawer

Full Extension

32" Freezer Drawer

Full Extension

32" Freezer Drawer

Full Extension

32" Freezer Drawer

Full Extension

26.00”
66cm

7.63”
19cm

6.13”
16cm

0.62”
16mm

End View

Both Models

Specifications

Model # Of 12x20 Pans V/Hz/Ph Amps Ship Weight BTU Load System BTU H.P. Nema Plug

MCCFES-60

MCCFES-94

Specifications

Exterior top is 18-gauge stainless steel with full
perimeter retainer bracket. Interior subtop is 22-gauge
stainless steel. Over two inches of environmentally
friendly, Kyoto Protocol Compliant, Non ODP (Ozone
Depletion Potential), Non GWP (Global Warming
Potential) Polyurethane two-part foam provides insulation
and rigidity.

Refrigerated base has stainless steel interior back and
bottom with ABS thermoformed sides. Base exterior
back and bottom are constructed of galvanized steel.

Exterior sides are aluminum. Louver, coil panel and
drawer faces are all standard with stainless steel
construction. (Unit is supplied with a wall-mounted
bracket and threaded rod to allow installation of the unit
against a solid surface.)

Units foundation is made of 14 gauge 1.50" x 3.25"
thick galvanized leg rails with casters as standard. Legs
available on request.

Full Extension Plus drawer system is a complete
drawer system, which can operate independent of the unit
it’s installed in. Drawer system is sized to hold 12” x 20”
x 4“ deep hotel pans and smaller fractional pans. Drawer
system is all stainless steel construction for maximum
durability. Drawer track rollers are made of Delrin and
do not require grease for operation. Intermediate tracks
are removable without tools and house Delfield’s “anti­friction binary roller system”. Drawer boxes are designed
with “easy pan grip flanges”. Tracks are designed with
a stay shut feature that holds the drawer gasket tight to
the base front on uneven floors. Exterior drawer fronts
are made of stainless steel; and an interior made of
ABS plastic with formed in channels to house the snap­in dart style santoprene gasket. A galvanized brace is
foamed in place to be an integral part of the drawer front
assembly. Each drawer front is injected with 1.87” of
high density polyurethane foam between the exterior and
interior. Handles are recessed black plastic and held in
with a positive lock system.

Unit is supported with two 14-gauge leg rails that run
the entire length of the unit. Leg rails are welded to the
bottom side of the unit and are tied together with two
12-gauge braces running front to back. 6” casters are
mounted standard.

Mullion Coil Refrigeration system uses HFC-404A
refrigerant, and maintains 0˚F (-18˚C) to -5˚F (-21˚C)
interior cabinet temperature at 100˚F (38˚C) ambient
room temperature. Models are standard with exterior
dial thermometer and electric condensate evaporators.
Electrical connections shall be 115 volt, 60 hertz and
single phase.

Models shall have a pre-wired condensing unit, a dial
thermometer installed in the removable louver and is
supplied with an 8.0' (2.4m) cord and plug.

McCall reserves the right to make changes to the
design or specifications without prior notice.

4 115/60/1 11.0 418lbs/190kg 925 1776 1/2 5-15P

8 115/60/1 16.0 505lbs/229kg 1558 2713 3/4 5-20P

Warning

To assure proper operation a 2” airspace must be maintained between the bottom of any cooking equipment and the top of
this unit. Cooking equipment must have a barrier (i.e. bottom, drip pan) between its heat source and the top of the equipment
stand. Failure to comply with this could severely damage the equipment stand and void all warranties.

McCall Refrigeration
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858

Phone: [phone]
Fax: [phone]
www.mccallrefrigeration.com

DSMCFES ©2009 McCall 08/09