Maytag MTUC7500AFM Installation
Compactor
PRODUCT MODEL NUMBERS OVERALL DIMENSIONS
CABINET OPENING DIMENSIONS
CUSTOM PANELS
CLEARANCE DIMENSIONS
MTUC7000AW
1. Grounded electrical
Panel should be ¹⁄₂" (13 mm)
min. thickness
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
W10190314-D-MT
Without Trim Kit
This compactor is for use on a single phase,
115-volt, 60 Hz, AC only, 15- or 20-amp fused and
properly grounded circuit and is equipped with a
grounding plug as shown below. It is recommended
that a separate circuit serving only this appliance
be provided.
MTUC7500A
341⁄8"
(86.7 cm)
3" min.
(7.6 cm)
A
24" min.
(61 cm)
18" min.
(45.7 cm)
15 min.
"
(38.7 cm)
15"
(38.1 cm)
34 " min.
(87 cm)
outlet must be a
minimum of 3" (7.6 cm)
away from surrounding
cabinets or nearby walls
as shown. It can be
B
placed either to the
left or the right side
of the product.
Models with handles Models without handles
24"
(61 cm)
A
1.
Leave 6" (15.2 cm) of clearance
space to the right side of the
compactor in order to remove
the compactor bags.
2.
Leave 23" (58.4 cm) of
clearance
in front of the compactor in order
to fully open or remove the
compactor drawer.
(
74.6 cm
(60.5 cm)
15"
15"
(
)
38.1 cm
(38.1 cm)
Panel should be ¹⁄₂" to ⁵⁄₈"
(13 to 16 mm) thick.
NOTE: A thicker panel may
need rounded front corners
and a cutout for access to
the handle.
25"
29
³⁄₈"
23¹³⁄₁₆
"
)
15"
15"
(
)
38.1 cm
(38.1 cm)
25"
(
(63.5 cm)
63.5 cm
)
7/2016
Loading...