Matrox Corona-II PC Compatibility List June 15, 2006 Page 4/4
Matrox Corona-II PC Compatibility List
Canada and U.S.A.
Matrox Electronic Systems Ltd.
1055 St. Regis Blvd.
Dorval, Quebec H9P 2T4
Canada
Tel: (514) 685-2630
Fax: (514) 822-6273
For more information, please call: 1-800-804-6243 (toll free in North America) or (514) 822-6020 or e-mail: imaging.info@matrox.com or http://www.matrox.com/imaging
Backplanes
ID Manufacturer Model Slot type(s) PCI/PCIe/PCI-X bridge(s)
A Trenton BP3/2/4/4 5V PCI / 3.3V PCI / ISA (2) Intel 21154 / (1) Intel 21152
B Trenton BP 1/1/2/4/4 PCI-X / 5V PCI / ISA (1) Intel 21154
C Kontron eBP-11A4B6 PCI-X / 5V PCI (2) PLX PCI 6540
D Trenton BPX 3/8 (6377) x8 PCIe / PCI-X / 5V PCI (1) Intel 41210 (PCIe), (1) Intel 21154 (PCI)
Notes (Contact Matrox Imaging Technical Support for details)
1. Compatible with Microsoft Windows 95/98SE.
2. Compatible with Microsoft Windows NT 4.0.
3. Compatible with Microsoft Windows 2000.
4. Compatible with Microsoft Windows XP Professional.
5. Not compatible in all multi-board configurations.
6. Not compatible in all display modes (i.e., extended desktop/auxiliary)
7. Tested in a single board configuration only.
8. Frame grabber and PCI graphics card must be both installed in the same PCI/PCI-X segment.
9. Not compatible in all slots (e.g., obstruction, failure to grab).
10. On-board VGA cannot be used as Imaging display.
11. MTXDMA issue under MIL/MIL-Lite 7.5. Please contact Matrox Imaging Technical Support for assistance.
12. Known booting issue with certain PCIe graphics boards. Please contact Matrox Imaging Technical Support for assistance.