M-AUDIO Thru 1x4 User Manual

Thru 1x4

™

1 IN/4 OUT MIDI THRU BOX

1

MANUAL

GUARANTEED FOR LIFE

Thru 1x4

1 IN/4 OUT MIDI THRU BOX

The Thru 1x4 MIDI Thru Box allows any received
MIDI signal to be sent to up to four separate MIDI
devices. The MIDI signal received at the Thru 1x4
MIDI IN is "echoed" unchanged out all four of the
MIDI OUTs simultaneously.

Thru 1x4 can be used whenever you have a MIDI
signal that needs to go to multiple destinations.
Also, if you are sending MIDI to many different units
by using each of their Thrus and are concerned that
one of your devices may be causing a MIDI delay,
you can use the Thru 1x4 to distribute the MIDI out­put with absolutely NO signal delay.

Thru 1x4 draws power directly from the MIDI Out of
any instrument or sequencer connected to its MIDI
IN -- so it needs no external power supply. The
instrument which is connected to the Thru 1x4's
MIDI IN must be turned On in order for the 1x4 to
receive power. When this is done, the red power
LED will light.

To use Thru 1x4, connect its MIDI IN to the MIDI

TM