Hardware Installation
Installing your Uno involves simply attaching it to your USB port using
the standard USB cable included on the Uno. We recommend that you
power down (turn off) your computer before connecting the Uno, during
the first installation.
Find a good spot around your computer station to place the Uno. The USB
port on your computer is a small (approx. 1/8" x 3/8") rectangular connector
and is often found in a group of two. Take the end of the USB cable and plug
it into the USB port on the back of your computer. Next, power up your
computer and proceed to the next section, "Software Installation."
Software Installation
A software driver is a special, dedicated program that makes a MIDI
interface accessible to an application. On the included driver disk, Midiman
supplies the drivers that enable you to use the Uno with Windows, Mac OS
8.6 through 9.x, or Mac OS X (Opcodes OMS drivers, for Mac users). All
Uno drivers are supplied on the included dual-formatted disk.
On your driver disk there is a "Readme" file that gives step by step
instructions on how to install the driver software. Locate the file entitled
"#installMac", for Mac users, or "#install.txt”, for PC users. Double click on
the file name to open it. Carefully follow the instructions given to properly
install your driver software.
Setting Up Your MIDI Studio
A typical MIDI system setup would include your Uno, a computer, MIDI
sequencing software, a MIDI controller keyboard and, perhaps, a MIDI
compatible sound module. This type of set-up can be constructed as follows:
1. Connect the Uno, via the USB cable, to the computer’s USB port connector.
2. With a MIDI cable, connect the MIDI Out of a controller keyboard to the
MIDI In of the Uno.
3. With a second MIDI cable, connect the MIDI Out of the Uno to the MID I In
of a sound module. (This can also be your MIDI controller keyboard if it has
the capability to serve as a sound module).
In the set-up below, the Uno is being used as a MIDI interface, inputting and
outputting MIDI data between the controller keyboard, the sound module (from
which sound will be produced) and the computer and its application software.
Using the Uno in your Application Software
In order to utilize the Uno, once it’s driver has been installed, you will need
to configure your MIDI application software . The manner in which this is
done varies between applications, so it is possible only to cover basics here.
Generally with both the Mac and PC, most MIDI applications have a MIDI
Port configuration or settings dialog box, titled something like "MIDI
Devices" or "MIDI Setup." It is within this dialog box that you will need
toselect or enable your MIDI input and output devices. If the Uno drivers
are properly installed, the port selections in the box should be titled, in the
input column, “Uno In-A” (or “Port 1”, on a Mac) and, in the output
column, “Uno Out-A” (“Port 1”, on Mac). “In-A” and “Out-A” (or input
and output “Port 1”) correspond to the physical input and output of your
Uno—make sure that youhighlight or check those items, if they are not
already. The output port that you select for a specific MIDI track within
your sequence will output MIDI information to the keyboard or sound
module attached to that port.
Contact Information
If you have any questions, comments or suggestions about this product or
any M-Audio or Midiman product, we invite you to contact us directly
using the following information:
MIDIMAN U.S. MIDIMAN U.K.
45 E. Saint Joseph St. Unit 5, Saracen Industrial Park
Arcadia, CA 91006-2861 Mark Rd.
U.S.A. Hemel Hempstead, Herts HP2 7BJ
England
Sales Information: 626-445-2842
Sales Information (email): info@midiman.net Sales Information: 44 (0)144 241 6590
Tech Support: 626-445-8495 Sales Information (email): info@midiman.co.uk
Tech Support (email): techsupt@midiman.net Technical Support: 44 (0)871 717 7102
Fax: 626-445-7564 Tech Support (email): richard@maudio.freeserve.co.uk
Internet Home Page: http://www.midiman.net Fax: 44 (0)144 224 6832
MIDIMAN Canada MIDIMAN Deutschland (Germany)
1400 St. Jean Baptiste Ave., #190 Kuhallmand 34
Quebec City, QC G2E 5B7 D-74613 Ohringen
Canada Germany
Tel: (418) 872-0444 Sales Information: 07941 98 7000
Fax: (418) 872-0034 Sales Information (email): info@midiman.de
Email: midimancanada@midiman.net Technical Support: 07941 98 70030
Technical Support (email): support@midiman.de
Fax: 07941 98 70070
Internet Home Page: http://www.midiman.de
M-AUDIO Japan
2-10-11 Marunouchi
Naka-Ku, Nagoya 460-0002
Japan
Tel: 81-52-218-3375
Fax: 81-52-218-0875
Internet Home Page: http://www.m-audio.co.jp
Email: info@m-audio.co.jp