Master-Bilt MBBC69 User Manual
MBBC50
BID SPECIFICATIONS
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
MBBC SERIES
Deep Well Horizontal
Bottle Coolers
MODELS
❑ MBBC50
❑ MBBC69
❑ MBBC95
FEATURES
CONSTRUCTION.
• Stainless steel top
• Black vinyl coated steel nish on
front, sides and back
• Galvanized steel interior with
oor drain
• Lids constructed of stainless steel
• Door openings have plastic
breaker strips to reduce condensation
• Foamed-in-place with low ODP
polyurethane insulation
• Wall thickness: 11/2"
• Adjustable epoxy-coated dividers
• Standard cap catcher
• Standard analog thermostat
Item no. MBBC________. Provide ______
Deep Well Horizontal Bottle Cooler(s),
Master-Bilt model no. MBBC_______.
Bottle coolers will feature stainless steel
top and black vinyl front, sides and back.
Interior will be galvanized steel with oor
drain. Lids will be constructed of stainless
steel. Door openings will have plastic
REFRIGERATION
• Self-contained refrigeration
system metered by capillary tube
• Front breathing compressor on
right side
• Evaporator coils are mounted to
back wall and are epoxy-coated
to resist corrosion
• Evaporator coils feature multiple
fan motors and blades for
greater air ow
• Condensate evaporator inside
compressor housing
• Access to slide-out condensing
unit behind front grille for easy
cleaning and service
breaker strips to reduce condensation.
Adjustable epoxy-coated dividers will also
be standard.
The refrigeration system will be self-
contained and use R-134a refrigerant. The
temperature range will be 33° to 38°F (.5°
to 3°C). System will be equipped with
coated evaporator coils and a condensate
• Refrigerant: R-134a
• Temperature range: 33° to 38°F
(.5° to 3°C)
WARRANTY
• Standard limited four year
extended compressor and one
year limited parts and labor
OPTIONS
❑ 3" casters
❑ Additional dividers
evaporator. Condensing unit will be slide-out
type for easy cleaning and service.
Bottle cooler to have standard limited 4
year extended compressor warranty and one
year limited parts and labor warranty.
Bottle cooler to be ETL listed in the U.S.
and Canada and ETL Sanitation listed.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
9-3/8"
26-1/2"
33-3/8"
95-9/16"
26-1/2"
12-11/16"
31-3/8"
33-3/8"
9-3/8"
26-1/2"
33-3/8"
69-9/16"
33-3/8"
50-9/16"
9-3/8"
26-1/2"
TECHNICAL SPECIFICATIONS
LISTINGS
HOOKUP
MBBC SERIES
DEEP WELL HORIZONTAL BOTTLE COOLERS
DIMENSIONS
(in.)
MODEL
MBBC50 50
MBBC69 699/16261/2333/81767 673 845 115 6.2 1/3 4 2 1090/462 50.5 302/137
MBBC95 959/16261/2333/82427 673 845 115 6.3 1/3 7 3 1408/672 69.0 385/175
9
/16261/2333/81284 673 845 115 5.9 1/4 3 2 704/286 37.0 240/109
MBBC50
PLAN VIEW
DIMENSIONS
(mm)
VOLTS AMPS
MBBC69
PLAN VIEW
UNIT
H.P.
NO. OF
DIVIDERS
NO.
OF
LIDS
CAPACITY
12 OZ. CANS/
12 OZ.
BOTTLES
MBBC95
PLAN VIEW
SHIP
CU. FT.
SHIP WT.
(LB/KG)L D H L D H
MBBC95
ELEVATION VIEW
MBBC50
ELEVATION VIEW
MBBC69
ELEVATION VIEW
ALL MODELS
NOTE: Cabinet designed for optimum performance in air-conditioned area at 75°F ambient and 55% relative humidity.
All specications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
All models via plug in, 8 foot long exible
three wire 16 gauge cord with molded plug.
SIDE VIEW
NEMA 5-15P
© Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
1392-1/12-web
Loading...