MARMITEK RoboDome 10 User Manual [fr]

RoboDome10

Outdoor IP Camera housing

with heater and fan

Quick Installation Guide

©MARMITEK

SAFETY WARNINGS

x All the safety and operating instructions should be read before the units is operated. x The wiring of your electrical installation is live (230 V) and extremely dangerous. Never

connect the module when plugged into the mains. Always turn off the main switch before starting the installation. Precautions for anti-lightning and anti-surging should be taken if necessary.

x During the course of transportation, storage and installation, the product should be

avoided from incorrect operations such as heavy pressing, strong vibration etc., which can cause damage of the product as there are sophisticated optical and electronic devices inside the machine.

x This product is for professional use and should be installed by a certified installer. x Do not operate it in case temperature, humidity and power supply are beyond the

limited stipulations.

x Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only with a stand, tripod, bracket, or mount recommended by Marmitek or sold with the product. Any mounting of the unit should follow the manufacturer’s instructions and should use mounting accessory recommended by manufacturer.

x If necessary, use a commercial lens cleaning

paper to clear the lens windows. Gently wipe the lens window until clean.

x In case of improper usage or if you have altered and repaired the product yourself, all

guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the product or when the product is used for purposes other than specified. Marmitek does not accept responsibility for additional damage other than covered by the legal product responsibility.

x This product is not a toy. Keep out of reach of children.

RoboDome 10

INTRODUCTION

The dome housing of the RoboDome10 is rain and dustproof to protect your IP RoboCam IP Camera from adverse environment conditions. Constructed from metal, the dome housing is compact and heavy duty. RoboDome10 has 2 brackets to make it suitable for the installation on different locations. The heater has two elements so that it can operate as a heater and defroster. Cable entry is from cable glands located conveniently on the top plate.

THE INSTALLATION OF THE SYSTEM

1. The Style of the Installation

1) Dimension of the Product

2) The Style of Installation

2.1 ) Wall Installation

2.2 ) Ceiling Installation

©MARMITEK

2. Steps of Installation (taking wall-installing style as example):

1) Unpack the carton and carefully take out the attachments.

2) Take out the cover of the wall-installed bracket (see Figure 1).

3) Take out system wires from the bracket (see Figure 2).

4) Fix the bracket on the wall (see Figure 3).

5) Rotate the vitreous cover counter clockwise and take it out (see Figure 4).

6) Fix the pedestal in the aluminium alloy ball (Figure 5). Install the ball on the bracket (Figure 6).

RoboDome 10

+ 11 hidden pages