Marantz LC2000 user guide

English ___________________________________________________3

Français ________________________________________________21

Italiano _________________________________________________39

Español _________________________________________________57

Deutsch_________________________________________________75

Nederlands______________________________________________93

3

User Manual Guide

Congratulations on purchasing your new LCD TV which we are sure will provide you with many years of trouble-free
enjoyment. This User Manual is provided to help you to start using your new set as quickly as possible and to explain all
the functions available to you.

Before setting up and using your new LCD TV, however, we recommend that you carefully read the section ‘Important
safety precautions’.

Note:
The set is also optionally available with a Monitor mode feature allowing you to use it as a computer monitor. Some of the features
and instructions given in this Quick Setup Guide therefore relate to the Monitor mode feature and will not apply to the standard TV
set.

EnglishFrançais

ItalianoEspañol

Deutsch

Nederlands

English

Contents

4 CONTENTS

Operational safety

Regulatory information__________________________5
Important safety precautions _____________________5

Accessories supplied

Power cable __________________________________6
Remote control and batteries ____________________6
Power adapter ________________________________6
User Manual __________________________________6
RF cable______________________________________6
Warranty card ________________________________6
Installing batteries in the remote control ___________6

Getting acquainted with your LCD TV

Front view____________________________________7
Rear view ____________________________________7
Remote control _______________________________8
Local keyboard ________________________________9

Connecting up

Right side or top side __________________________10
VESA Wall Mounting __________________________10
Mains supply connection________________________10
Aerial connection _____________________________10
Scart (Euro) connection ________________________10
Y/C video connection (EXT 3, Option only)________11
CVBS connection (EXT 3, Option only) ___________11
Left/right audio input connections ________________11
PC video input (Monitor option only) _____________11
Mini jack PC audio input (Monitor option only) _____12
Headphone connection_________________________12

First installation

OSD language selection ________________________13
Country Selection_____________________________13
Using Auto Search to select your programmes _____13
Manual Sort__________________________________14
Deleting a programme _________________________14
Moving a programme __________________________14
Editing a channel ______________________________14
Inserting a channel ____________________________15
Selecting Monitor mode (Monitor option only) _____15

Basic channel selection

Channel selection using the numerical keypad on the
remote control _______________________________16
Channel selection using Page+/Page- on the remote
control _____________________________________16

Operating with the On Screen Display (OSD)

Main Menu selection ___________________________17
Adjusting TV picture settings ____________________17
Adjusting sound settings ________________________17
Changing the OSD language_____________________18
Automatic programme search ___________________18
Using Manual sort to assign TV channels to programmes
of your choice________________________________19

Using the Remote Control Shortcut keys

Movie Expand ________________________________19
Picture Effect_________________________________19
Sound Effect _________________________________19
Sleep Timer__________________________________19

Using the Local Menu

Teletext

Using Teletext _______________________________20

Using your LCD TV in Monitor mode

Selecting Monitor mode ________________________21
Adjusting picture settings in Monitor mode ________21

Product Specification

English

Operational safety

Regulatory information

This equipment complies with the requirements
of Directive 89/336/EEC and 73/23/EEC as
amended by 93/68/EEC

Important safety precautions

Breakage

The screen of your LCD TV is made of glass and can
break if the product is dropped or knocked. If this should
happen, take care to avoid injury caused by broken glass
pieces or sharp edges.

Cleaning

Before cleaning your LCD TV, unplug the power cord
from the mains supply. Clean with a damp cloth and do
not use liquid or aerosol cleaners.

Moving

Exercise utmost care when moving your LCD TV.

Placement

Ensure that your LCD TV is always placed on a stable
surface. Do not place it on an unstable trolley, stand,
tripod or table where it could fall and sustain damage as
well as cause serious personal injury. If wall mounted,
ensure that the set is mounted only using the holes
provided for mounting in the rear.

Power supply

Use only the power supply delivered with your LCD TV
or one recommended by the manufacturer. Use the
power supply only for its intended purpose.

Important note:
When the TV is switched off it still consumes a small amount
of power. It is therefore recommended that the power supply
is unplugged from the mains supply when the TV set is
switched off for an extended period.

Sources of heat

Keep your LCD TV away from heat sources such as
radiators, heaters, stoves and amplifiers.

Water and moisture

Do not use your LCD TV in a damp environment, for
example near a bathtub, washbasin, kitchen sink or
swimming pool.

Do not place it in an area when liquid may drip or splash
on it and ensure that no liquid filled containers such as
vases are placed on top of it.

Ventilation

The cabinet of your LCD TV has openings for ventilation.
Do not cover or block these openings since insufficient
ventilation can cause overheating and shorten the life of
your TV. Do not operate the set on soft surfaces such as
a bed, sofa or rug since this may block the ventilation
openings. Likewise, do not place the TV in an enclosed
place such as a bookcase or rack, unless proper
ventilation is provided.

OPERATIONAL SAFETY 5

6 ACCESSORIES SUPPLIED

Accessories supplied

On unpacking your LCD TV, ensure that the following
accessories are included.

Power cable

Remote control and batteries

Power adapter

User Manual

RF cable

Warranty card

Installing batteries in the remote
control

Before switching on your LCD TV set for the first time,
install the two type AA batteries supplied in the remote
control. These should be replaced periodically when
their power is depleted and the remote control fails to
operate.

Open the battery cover on the rear of the remote
control and insert the two batteries taking care that the
positive and negative ends of the batteries correspond
with the positive and negative markings on
compartment.

Caution: do not mix old and new batteries, and
never mix different types of battery (standard,
alkaline etc.).

English

GETTING ACQUAINTED WITH YOUR LCD TV 7

Getting acquainted with your LCD TV

Front view

Rear view

English

8 GETTING ACQUAINTED WITH YOUR LCD TV

Remote Control

Numerical keys 0 p 9

0 For keying numerical information e.g. channel

numbers and teletext pages.

Standby

0 Switches the set into standby mode. In this mode

the set still consumes a small amount of power and
can be woken up, for example by selecting a channel
using the numerical keys.

Sleep timer

0 Switches the set into standby after a preselected

time.

Picture effect

0 Provides a choice between pre-selected picture

settings.

Sound effect

0 Provides a choice between pre-selected audio

settings and allows you to switch the audio output
mode between stereo and mono. When there is a
dual-language transmission, you can also use the
sound effect key to select language-1 or language-2.

Mute

0 Switches the sound from the loudspeakers off/on.

Previous programme

0 Returns the set to the previously selected

programme.

Menu select

0 Opens/closes the Main Menu on the On Screen

Display.

English