Manitowoc Ice RF0300, RF0650, RF1200 User Manual

Base

RF0300/0650/1200 Flake Ice Machines

30” & 48” Bin Adapter Kit – Installation Instructions

Note: Bin must be level before installation of ice
machine.

1. Apply foam tape across front & back bin
surfaces.

2. Place RH & LH panels on bin as shown. Line
up back edge of pane ls with back of bin.
Use holes in panels to dr ill holes for
screws; use a 5/32” drill bit.

CAUTION

Do not drill through bin liner.

3. Place front support and back support on
top of panels, line up slots in supports with
holes in panels. Install supplied screws but
do not tighten completely.

4. Place ice machine on surfaces shown. Snug
up front and back supports to ice machine
base, tighten all screws.

5. Fill all gaps/seams with provided foam
tape. Use food gra de RTV sealant along
intersections and the inside edge of the
foam tape to prevent water tracking.

Step 4 Step 1

Step 3

Panel Flanges

Must be on

the Outside of

Ice Machine

Step 2

Manitowoc Ice

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 000006020
Telephone [phone], Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Sheet 1 of 1

Web Site - www.manitowocice.com 7/09