Manitowoc Ice JD0322A Installation Manual

J0320

Thank you for selecting a Manitowoc Ice Machine, the dependability leader in ice making equipment and related products. With proper care and maintenance, your new Manitowoc Ice Machine will provide you with many years of reliable and economic performance.

We reserve the right to make product improvements at any time. Specifications and design are subject to change without notice.

Page 1390 Rev (3/98)

J0320 CONTROL BOX

PART NO.

DESCRIPTION

1 Control Board (For use with all voltages) 76-2782-3

Fuses-Mounted On Control Board a. 7 Amp 25-1100-3 b. .125 Amp 60 Hz Mini Fuse 25-1116-9 c. .100 Amp 50 Hz Mini Fuse 25-1105-3 Toggle Switch only 23-0134-3 a. Toggle Switch With Wiring Harness Attached Contactor a. 115V/60Hz/1Ph 24-1029-3 b. 208-230V/60HZ/1 Ph or 230V/50Hz/1 Ph 24-1028-3 P.T.C.R. Compressor Starter 85-0500-3 High Pressure Cut-out 23-5536-9 Terminal Board With Wire Harness Attached a. 60 Hz 20-3213-3 b. 50 Hz 20-3214-3

Miscellaneous -Brackets, Screws, etc.

Control Box 601919-1 Control Box Cover (Not shown) 76-2539-3 Screw, #8 x .75 Serrated 51-2166-9 P.T.C.R. Compressor Starter Mounting Bracket Control Board Mounting Supports 43-0225-3 Screw, #10-24 x .50 Ground 52-0216-9 Screw, #10-24 x .50 Hex Head 52-0206-9 Control Board Cover 600180-1

20-3217-3

85-0502-3

Rev (3/98) Page 1391

J0320 EVAPORATOR COMPARTMENT

PART NO.

Dice Cube

76-2519-9

115V/60HZ

76-2306-3

Float Valve Screen

83-6906-9

Ice Thickness Control

76-2781-3

Water Curtain

602850

Water Distribution Tube

76-2498-3

Control Box Cover

76-2539-3

Barbed Tee

83-9103-3

Screw,

#10-24 x .50

52-0206-9

DESCRIPTION

1 Evaporator Assembly

a. Regular Cube c. Half Dice Cube

d. Gasket/Top Molding Assembly 76-2621-3 Water Pump

b. 208-230V/60HZ or 230V/50Hz Float Valve (Complete Assembly) 83-6904-9

b. Float Valve Plunger 83-6908-9 c. Float Valve Compression Nut

Magnetic Bin Switch (Mounted to Evaporator) 23-0148-3 Water Flow Clamp (Use on Regular Cube Evap. Only - Not shown)

Water Curtain Hanger 76-2776-3 Water Curtain Magnet and Clip 76-2802-3

Water Trough 600245-1 High Pressure Cut-out (Refrigeration System - Not shown) Refrigeration Service Valve Assembly

Miscellaneous - Brackets, Screws, etc.

50 Float Valve Mounting Bracket

Wing Nut, #8-32 54-8913-9 Tubing, Vinyl .25 OD (Water Inlet) Tubing, Vinyl .625 ID (Tee to Dump Valve) Tubing, Vinyl .625 ID (Tee to Distribution Tube)

Tubing, Vinyl .625 ID (Pump to Tee)

76-2520-9 76-2518-9

76-2601-3

56-5072-9

76-2054-3

23-5536-9 83-7310-9

600281-1

44-2029-1 44-2038-3 44-2102-3 44-2101-3

Hose Clamp 56-5070-9 Thumbscrew-Push-in Water Trough Support Pin (Order Nylon Hex Nut Separately) 43-0201-3 Water Trough Support Pin Nylon Hex Net Water Pump Cord Channel Water Pump Electrical Wire Lead

Screw, #8-32x .63 Nylon-Water Distribution Tube Mounting 53-0511-3 Screw Used to Mount High Pressure Cut-out (Not shown)

Pop Rivet SS 57-6877-9 Screw,#10-24 x .750, Used to Mount Evaporator

Splash Shield

50-1227-9

54-2945-9 601410-1 20-7720-3

51-2166-9

52-0218-9 76-2624-3

Page 1392 Rev (3/98)

+ 4 hidden pages