Mallory Ignition 6148201, 6164501 User Manual

INSTALLATION INSTRUCTIONS

®

MALLORY EDELBROCK

FUEL INJECTION DISTRIBUTOR

EDELBROCK

SYSTEM

IGNITION

AMPLIFIER

MALLORY EDELBROCK FUEL
INJECTION DISTRIBUTOR

1

NOTE THE POSITION OF #1 CYLINDER ON
THE DISTRIBUTOR HOUSING. CONNECT
THE #1 SPARK PLUG WIRE AT THIS
LOCATION ON THE DISTRIBUTOR CAP.

THIS IS REQUIRED FOR THE EDELBROCK
SYSTEM TO FUNCTION PROPERLY.

FROM EDELBROCK

MAIN WIRE HARNESS

FROM EDELBROCK
MAIN WIRE HARNESS

BLACK

GROUND TO
ENGINE BLOCK

NOTE: THIS GROUND
CONNECTED TO PROPERLY GROUND
THE EDELBROCK SYSTEM

MALLORY IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP
550 MALLORY WAY, CARSON CITY, NV 89701
[phone] FAX [phone]
www.mrgasket.com

MUST

BE

NOT USED 
DISCARD PLUG

CUT WIRE HERE

BLACK (NOT USED)

RED (COIL +)

BROWN (COIL )

TO COIL (+)

IGNITION

+

COIL



FORM 1030

(REV. A) 03/01

MADE IN U.S.A.

PRINTED IN U.S.A.