Makita HM1304 User Manual
Demolition Hammer
HM1304
DOUBLE INSU-
DOUBLE
LATION
INSULATION
SPECIFICATIONS
Model HM1304
Blows per minute ........................................................................................................................................ 1,450
Overall length .......................................................................................................................................... 647 mm
Net weight ...................................................................................................................................................15 kg
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for heavy chiseling and demolition work as well as for driving and compacting with appropriate accessories.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and
can be operated on single-phase AC/DC supply. They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets without earth wire.
For European countries only
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standardized documents,
in accordance with Council Directives, 89/336/EEC, 98/
37/EC.
Measured sound power level: 100 dB
Guaranteed sound power level: 103 dB
These sound power levels are measured in accordance
with Council Directive, 2000/14/EC.
Conformity assessment procedure: Annex VI
Notified Body: BSI Product Services, Maylands Avenue,
Hemel Hempstead, Herts HP2 4SQ, England.
Vibration
The typical weighted root mean square acceleration
value is 13 m/s
These values have been obtained according to
EN60745.
EN60745, EN55014, EN61000
2
.
Yasuhiko Kanzaki
CE 2005
ENH112-5-V3
Director
MAKITA I NTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
2
1
5
6
1
3
2
4
7
8
9
12
10
11
34
13
12
15
14
16
56
15
18
17
19
78
3
Loading...