![](/html/5e/5eec/5eec7d022bd4470f3d68501f98c6948e5805f9827d961b75ec2cbd59ba1c88b1/bg1.png)
Cordless Steel Rod Cutter
GB
Instruction manual
DSC163
![](/html/5e/5eec/5eec7d022bd4470f3d68501f98c6948e5805f9827d961b75ec2cbd59ba1c88b1/bg4.png)
ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. LED indicator
6. Switch Lock
7. Switch trigger
8. Side A
9. Side B
10. Protector
11. Rebar
12. Blades
13. Stopper
14. More than 200 mm
15. Air Hole
16. Hex Wrench
17. Return Valve
18. Blade A (Thicker Blade)
19. Blade B (Thinner Blade)
20. Bolt (Longer)
21. Bolt (Shorter)
22. Washer
23. Bar Holder
24. Cutter Rod
25. Blade A on Bar Holder
26. Blade B on Cutter Rod
27. Spare Blades
Explanation of general view
SPECIFICATIONS
Model DSC163
Max. Cutting Capacity (Dia.mm)
Grade 40 - Grade 60
Grade 40: Tensile Strength 490 N/mm2 70,000 PSI
Grade 60: Tensile Strength 620 N/mm2 90,000 PSI
Cutting Speed 2.8 seconds
Overall length 360 mm
Net weight 6.9 kg
Rated voltage D.C. 18V
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge
BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire.
16 mm
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
..... Read instruction manual.
........ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation in
accordance with national laws, electric
4
equipment and batteries and battery
pack(s) that have reached the end of their
life must be collected separately and
returned to an environmentally
compatible recycling facility.
Intended use
The tool is intended for cutting rebar.
Noise
The typical A-weighted noise level determined according
to EN60745-1:
Sound pressure level (LpA) : 78 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745-1:
Work mode : cutting rebar
Vibration emission (a
Uncertainty (K) : 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
Wear ear protection
) : 2.5 m/s2 or less
h
2