Makita DML802 Instruction Manual
GB L.E.D. Flashlight Instruction manual
F Lampe Torche à L.E.D. Manuel d’instructions
D Akku-L.E.D.-Lampe Betriebsanleitung
I Torcia elettrica a LED Istruzioni per l’uso
NL LED-lamp Gebruiksaanwijzing
E Linterna Luminiscente Manual de instrucciones
DML802
2
12
34
56
2
3
1
4
5
6
7
8
7
8
3
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
...... Read instruction manual.
................. Indoor use only
................. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
6. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
7. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
8. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
9. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
10. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
1. Battery cartridge
2. Red indicator
3. Button
4. Indicator lamps
5. Check button
6. Switch
7. Strap hook
8. Ring
Model DML802
LED 3.2 W x 1 pc
Standard battery
cartridge
BL1415 BL1415N BL1430 BL1440 BL1450 BL1815 BL1815N
BL1820/
BL1820B
BL1830/
BL1830B
BL1840/
BL1840B
BL1850/
BL1850B
BL1860B
Voltage 14.4 V 18 V
Operating time
(Approx.)
4 hours 5 hours 9 hours 14 hours 16 hours 6 hours 7 hours 10 hours 13 hours 18 hours 23 hours 27 hours
Dimensions
(with battery)
L 256 mm 272 mm 256 mm 272 mm
W 79mm 79mm 79mm 79mm
H 99mm 99mm 116mm 116mm
Net weight
(with battery)
0.63 kg 0.82 kg 0.68 kg 0.93 kg
4
11. Be careful not to drop or strike battery.
12. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
CAUTION:
1. When the tool is not in use, always switch off and
remove the battery cartridge from the tool.
2. Do not store the tool and battery cartridge in locations
where the temperature may reach or exceed 50 °C
(122 °F).
3. Do not give the tool a shock by dropping, striking, etc.
4. Do not expose the light to eyes continuously. It may
hurt them.
5. Do not cover or clog the lit tool with cloth or carton,
etc. Covering or clogging it may cause a flame.
6. Do not disassemble the charger or battery cartridge;
take it to a qualified serviceman when service or repair
is required. Incorrect reassembly may result in a risk
of electric shock or fire.
7. Use the tools only with specifically designated battery
packs. Use of any other battery packs may create a
risk of injury and fire.
8. If operating time has become excessively shorter, stop
operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
9. Do not use a damaged battery.
10. If any problem develops, consult your nearest Makita
Service Center or dealer. To maintain product safety
and reliability, repairs, maintenance or adjustment
should be carried out by Makita Authorized Service
Center.
SAVE THESE INSTRUCTIONS.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the battery
cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature at
10 °C - 40 °C (50 °F - 104 °F). Let a hot battery
cartridge cool down before charging it.
4. Charge the battery cartridge once in every six months
if you do not use it for a long period of time.
FUNCTIONAL DESCRIPTION
Charging
Charge the battery cartridge with the Makita charger
before use.
Installing or removing battery cartridge
(Fig. 1)
CAUTION:
• Always switch off the tool before installing or removing
of the battery cartridge.
• Hold the tool and the battery cartridge firmly when
installing or removing battery cartridge. Failure to hold
the tool and the battery cartridge firmly may cause
them to slip off your hands and result in damage to the
tool and battery cartridge and a personal injury.
To remove the battery cartridge, slide it from the tool while
sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip it
into place. Insert it all the way until it locks in place with a
little click. If you can see the red indicator on the upper
side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being inserted
correctly.
Indicating the remaining battery capacity
(Only for battery cartridges with “B” at the end of the
model number.) (Fig. 2)
Press the check button on the battery cartridge to indicate
the remaining battery capacity. The indicator lamps light
up for few seconds.
015658
NOTE:
• Depending on the conditions of use and the ambient
temperature, the indication may differ slightly from the
actual capacity.
Lighting up the LED light (Fig. 3)
CAUTION:
• Do not look in the LED light or see the source of light
directly.
Push the switch to light up the LED light. To turn off, push
the switch again.
Battery protection system
The protection system is equipped, which automatically
cuts off the output power for its long service life. The light
goes off during operation when the remaining battery
Indicator lamps
Remaining
capacity
Lighted Off Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery may
have
malfunctioned.
5
capacity gets low. This is caused by the activation of
protection system and does not show the light trouble.
Remove the battery cartridge from the light and charge it.
Head angle (Fig. 4)
The head angle can be adjusted in 12 stages. Adjust as
desired.
Strap hook (Fig. 5, 6)
The strap hook is convenient for temporarily hanging the
tool.
The strap hook can be installed on the upper or lower ring
in accordance with usage.
MAINTENANCE
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The use
of any other accessories or attachments might present a
risk of injury to persons. The accessories or attachments
should be used only in the proper and intended manner.
• Makita genuine battery and charger
NOTE:
Some items in the list may be included in the tool package
as standard accessories. They may differ from country to
country.
6
FRANÇAIS (Instructions d’origine)
Descriptif
SPÉCIFICATIONS
• Étant donné l’évolution constante de notre programme de recherche et de développement, les spécifications
contenues dans ce manuel sont sujettes à des modifications sans préavis.
• Les spécifications et la batterie peuvent varier d’un pays à l’autre.
• Poids, batterie incluse, selon la procédure EPTA 01/2003
Symboles
...... Reportez-vous au manuel
d’instructions.
................. Utilisation en intérieur uniquement
................. Pour les pays européens uniquement
Ne pas jeter les appareils électriques et
les bloc-batteries dans les ordures
ménagères !
Conformément aux directives
européennes relatives aux déchets
d’équipements électriques ou
électroniques (DEEE) ainsi qu’aux
batteries, aux accumulateurs et aux
batteries et accumulateurs usagés et à
leur transposition dans la législation
nationale, les appareils électriques, les
batteries et les bloc-batteries doivent
être collectés à part et être soumis à un
recyclage respectueux de
l’environnement.
CONSIGNES DE SÉCURITÉ
IMPORTANTES
AVERTISSEMENT :
Lors de l’utilisation des outils électriques, vous devez
toujours prendre des précautions élémentaires en matière
de sécurité pour réduire les risques d’incendie, de choc
électrique et de blessure. Ces précautions sont
notamment les suivantes :
LISEZ TOUTES LES
INSTRUCTIONS.
1. Avant d’utiliser la batterie, veuillez lire toutes les
instructions et tous les avertissements inscrits sur (1)
le chargeur, (2) la batterie et (3) l’appareil alimenté par
la batterie.
2. N’utilisez que le chargeur spécifié par le fabricant. Un
chargeur qui convient à un type de batterie peut créer
un risque d’incendie s’il est utilisé avec un autre type
de batterie.
3. Utilisez une source d’alimentation dont la tension
correspond à celle spécifiée sur la plaque signalétique
du chargeur.
4. N’essayez pas d’utiliser un transformateur élévateur,
un générateur de moteur ou une prise de courant
continu.
5. Après le chargement ou avant d’effectuer la
maintenance ou le nettoyage, débranchez le chargeur
de la source d’alimentation.
6. Le support de batterie n’est pas étanche. Ne l’utilisez
pas dans les endroits humides ou mouillés. Ne
l’exposez ni à la pluie, ni à la neige. Ne la lavez pas
dans l’eau.
7. Ne touchez pas l’intérieur de la lampe torche avec des
brucelles ou tout autre outil en métal.
8. En cas de mauvaise utilisation, du liquide peut fuir de
la batterie ; évitez tout contact. En cas de contact
accidentel, nettoyez la surface en question à l’eau. Si
le liquide entre en contact avec les yeux, consultez un
1. Batterie
2. Partie rouge
3. Bouton
4. Voyants
5. Bouton de vérification
6. Interrupteur
7. Crochet de sangle
8. Bague
Modèle DML802
LED 3,2 W x 1 pc
Batterie
standard
BL1415 BL1415N BL1430 BL1440 BL1450 BL1815 BL1815N
BL1820/
BL1820B
BL1830/
BL1830B
BL1840/
BL1840B
BL1850/
BL1850B
BL1860B
Tension 14,4 V 18 V
Durée de
fonctionnement
(environ)
4 heures 5 heures 9 heures 14 heures 16 heures 6 heures 7 heures 10 heures 13 heures 18 heures 23 heures 27 heures
Dimensions
(avec
batterie)
L 256 mm 272 mm 256 mm 272 mm
P 79mm 79mm 79mm 79mm
H 99mm 99mm 116mm 116mm
Poids net
(avec batterie)
0,63 kg 0,82 kg 0,68 kg 0,93 kg
Loading...