Makita 4076DW, 4076D Manual

instructions) (Original ENGLISH

INSTRUCTION MANUAL

Cordless Cleaner

4076D

008901

IMPORTANT: Read Before Using.

ENGLISH (Original instructions)

SPECIFICATIONS

	Model		4076D
	Capacity		500 ml (for dust bag)
			330 ml (for paper pack)
Continuous use		High	Approx. 10 min.
		Low	Approx. 20 min.
	Overall length		446 mm (without nozzle) / 983mm (with nozzle)
	Net weight		1.1 kg
	Rated voltage		D.C. 7.2 V

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications and battery cartridge may differ from country to country.

•Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment. Be sure that you understand their meaning before use.

Read instruction manual.

Cd	Only for EU countries
Ni-MH
Li-ion	Do not dispose of electric equipment or
	battery pack together with household
	waste material!
	In observance of European Directive
	2002/96/EC on waste electric and
	electronic equipment, 2006/66/EC		on
	batteries and accumulators and waste
	batteries and accumulators and their
	implementation	in accordance	with
	national laws,	electric equipment	and

battery pack that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

ENE017-1

Intended use

The tool is intended for collecting dry dust.

ENA005-3

IMPORTANT

SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING - To reduce the risk of fire, electric shock or injury:

1.Do not expose to rain. Store indoors.

2.Do not allow to be used as a toy. Close attention is necessary when used by or near children.

3.Use only as described in this manual. Use only manufacturer's recommended attachments.

4.Do not use with damaged battery. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

5.Do not handle appliance with wet hands.

6.Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

7.Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

8.Turn off all controls before removing the battery.

9.Use extra care when cleaning on stairs.

10.Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

11.Use only the charger supplied by the manufacturer to recharge.

12.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

13.Do not use without filters in place.

14.Do not charge the battery outdoors.

15.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person

2

responsible for their safety.

16.Children should be supervised to ensure that they do not play with the appliance.

SAVE THESE INSTRUCTIONS.

ENC008-1

IMPORTANT SAFETY

INSTRUCTIONS

This appliance is intended for household use.		FOR BUILT-IN BATTERY
	ENB106-2
ADDITIONAL SAFETY RULES		1.	Before using built-in battery, read all
			instructions and cautionary markings on (1)
1.	Read this instruction manual and the charger		battery charger, (2) battery, and (3) product
	instruction manual carefully before use.		using battery.
2.	Do not pick up the following materials:	2.	Do not disassemble built-in battery.

−Hot materials such as lit cigarettes or 3. If operating time has become excessively

	spark/metal	dust	generated	by	shorter, stop operating immediately. It may
	grinding/cutting metal				result in a risk of overheating, possible burns
−	Flammable materials such as gasoline,				and even an explosion.
	thinner, benzine, kerosene or paint				4. If electrolyte gets into your eyes, rinse them
−	Explosive materials like nitroglycerin				out with clear water and seek medical
−	Ignitible materials such as Aluminum, zinc,				attention right away. It may result in loss of
	magnesium,	titanium,	phosphorus	or	your eyesight.
	celluloid				5. Do not short the built-in battery:
−	Wet dirt, water, oil or the like				(1) Do not touch the terminals with any
−	Hard pieces with sharp edges, such as				conductive material.
	wood chips, metals, stones, glasses, nails,				(2) Avoid storing built-in battery in a
	pins or razors				container with other metal objects such as
−	Powder to clot such as cement or tonor				nails, coins, etc.
−	Conductive dust such as metal or carbon				(3) Do not expose built-in battery to water or
−	Fine particle like concrete dust				rain.
Such action may cause fire, injury and/or					A battery short can cause a large current
property damage.					flow, overheating, possible burns and
3. Stop operation		immediately if you notice			even a breakdown.
anything abnormal.					6. Do not store the tool and built-in battery in
4. If you drop or strike the cleaner, check it					locations where the temperature may reach or
carefully for cracks or damage before					exceed 50 C (122 F).
operation.					7. Do not incinerate the built-in battery even if it
5. Do not charge the cleaner close to dangerous					is severely damaged or is completely worn out.
flammable materials such as gasoline, gas,					The built-in battery can explode in a fire.
paint or adhesives.					8. Be careful not to drop or strike battery.

6.Do not charge the cleaner on papers, cloth,

	7.	carpet, vinyl, etc. This may cause a fire.		SAVE THESE INSTRUCTIONS.
		Do not charge the cleaner in a dusty place.		Tips for maintaining maximum battery life
	8.	Be sure no one is below when using	the
				1.	Charge the built-in battery before completely
		cleaner in high locations.
					discharged.
	9.	Do not bring close to stoves or other heat
					Always	stop tool operation	and charge	the
		sources.
					built-in	battery when you	notice less	tool
	10.	Do not block the intake hole or vent holes.
					power.
	SAVE THESE INSTRUCTIONS.			2.	Never recharge a fully charged built-in battery.
					Overcharging shortens the battery service life.
				3. Charge		the built-in battery with room
					temperature at 10 C - 40 C (50 F - 104 F).

Let a hot built-in battery cool down before charging it.

3

FUNCTIONAL DESCRIPTION

CAUTION:

•Always be sure that the tool is switched off before adjusting or checking function on the tool.

Charging the built-in battery

1		1.	Charging
			connector
		2.	Charging plug
	2
008909
	1	1.	Lamp

008910

Use only the Makita charger DC7021 to charge this cleaner. Use of other type chargers may cause the battery to burst, resulting in personal injury and damage. Charge the cleaner when it is to be used for the first time or it has been left uncharged for a long time. Connect the charging plug to the charging connector, then plug in the charger to the power receptacle. The light in front of the cleaner switch will come on and charging will begin. Charging takes approximately 3 - 5 hours. The light goes out after the charging is complete. Refer to the instruction manual for the charger for more details.

CAUTION:

•Do not operate the cleaner during charging. It may be damaged.

•Always disconnect the charging plug from the cleaner after charging.

•When you charge a new cleaner or a cleaner which has been left uncharged for a long time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the cleaner fully after discharging it completely a couple of times.

•Maximum charging time may be 9 hours depending on room temperature.

Switch action

1. Switch

1

008911

CAUTION:

•Always be sure that the dust bag or paper pack is installed properly in the cleaner before use. Improper installation may allow dust to enter the motor, resulting in malfunction of the cleaner.

•Always switch off the cleaner after each use to prevent damage to the cleaner and to lengthen the service life of the batteries.

This cleaner can be operated in "standard" and "strong" suction. For standard suction, slide the switch forward to the LOW position. For strong suction, slide the switch further to the HIGH position.

To stop the cleaner, slide the switch back to the OFF position.

ASSEMBLY

Dust disposal

CAUTION:

• Empty the cleaner before it becomes too full, or the suction force weakens.

• Be sure to empty out the dust inside the cleaner itself. Failure to do so may cause the sponge filter to be clogged or the motor to be damaged.

• Never throw away the dust stopper because it should be used whenever either the dust bag or the dust pack is used.

1. Lever

1 A

008917

4