Majestic TD2220 Instruction Manual

TD2220

LCD TV with DVD Combo

LCD TV with DVD Combo

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire or electric shock do not expose this,
equipment to rain or moisture.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION TO AVOID THE RISK OF ELECTRIC SHOCK:,

DO NOT REMOVE COVER OR BACK().

NO USER SERVICEABLE PARTS INSIDE-.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to avoid the risk of
electric shock do not disassemble this equipment by anyone,
except a qualified service personnel.

This symbol is intended to alert the user to the presence
of important operating and maintenance instructions
in the literature accompanying the appliance.

CAUTION

Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure

Safety Instructions

TV User Guide

1

Do not place the equipment on any uneven or unstable carts,
stands tables shelves etc,, ..
The equipment may fall causing serious injuries to children or adults,
and serious damage to the equipment itself.

Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be handled
with care Quick stops excessive force and uneven surfaces may., ,
cause the equipment and recommended cart or stand to overturn.

Do not disable the 3 wire grounding type plug The grounding pin-.
on the 3 prong plug is an important feature Removing the grounding-.
pin will increase the risk of damaging the equipment.
If you can not fit the plug into the electrical outlet contact an,
electrician to install a grounding outlet.

Always operate this equipment from the type of power source
indicated on the rear of the serial model plate/.

Never overload wall outlets and extensions.
Use and handle the power cord with care.
Do not place any heavy objects on the AC power cord.
Do not pull the AC power cord Do not handle theAC power cord.
with a wet hand.
Do not touch the power cord and antenna cable during lightning.

When the equipment has not been used for a long period of time,
unplug it from the wall outlet.

Do not place use or handle this equipment near water,.

Never expose the equipment to liquid rain or moisture,, .
Seek for service if any of the above is spilled into the equipment.

Do not expose the equipment to extreme temperatures or
to direct sunlight the equipment may overheat and can be damaged,.

Do not install the equipment near any heat sources such as
radiators heat registers stoves or any other apparatus,,,
that might produce heat.

To prevent any injuries the following safety precautions should be observed,
in the installation use servicing and maintenance of this equipment,, .
Before operating this equipment please read this manual completely,,
and keep it nearby for future reference.

IMPORTANT SAFETY INSTRUCTIONS

Safety Instructions

TV User Guide

2

Do not place or drop any other objects on top.

Do not attempt to service the equipment yourself.

Opening and removing the covers may expose you to dangerous
voltage or any other hazards and may void your warranty.
Refer service from qualified personnel.

Do not insert anything into the ventilation holes of your equipment Inserting any.
metal or flammable objects may result to fire or electric shock.

Do not place the equipment on uneven or unstable carts stands,,
tables shelves etc,..
The equipment may fall causing serious injuries to children or adults,
and serious damages to the equipment itself.

Always place the equipment on the floor or on a surface that
is sturdy level stable and strong enough to support,,
the weight of the equipment.

Do not block any ventilating openings leave an open space around the equipment,.

Never place the equipment :

on a bed sofa rug or any other similar surfaces,,, ;
too close to drapes curtains walls in a bookcase//, ,

built in cabinet or any other similar places that may cause-,
poor ventilation.

Always remove the cord from the outlet before cleaning the equipment.

Never use cleaners harsh or abrasive chemicals or solvents on the,
equipment Clean only with a dry soft lint free cloth.,,-.

IMPORTANT SAFETY INSTRUCTIONS

Safety Instructions

TV User Guide

3

CONTENT

CONTENT

TV User Guide

4

PREPARATION

PREPARATION

PREPARATION

Congratulations on the purchase of your new High Definition Compatible
Television In order to maximize the potential of this television you must use.,
it in conjunction with a High Definition Signal Source utilizing a proper High,
Definition receiving unit of ten referred to as a set top box Only true("-").""
High Definition transmit ted video will yield optimum picture quality.
Please contact your cable or satellite provider for more information on
how to receive High Definition programming.

5

1 set of Composite video input terminal
1 set of S VIDEO input terminal­1 set of HDMI input terminal
1 set of VGA input terminal

Component Video Inputs

Offer the best video quality for DVD 480i 480p and digital set top box(/ ), -­(,) .HD1080i 720p connections

High Definition Multimedia Interface HDMI-()

This interface can accommodate a copy protected digital connection HDCP to other digital set top-()­boxes that have compatible interface.

40

Features

Various Audio Video terminals for external equipment connection

PREPARATION

Package Contents

Power Cord

Remote control/
AAA batteries

Once you open the box make sure all of the following contents are included,.
If missing any items please return this product to the original place,
of purchase.

These items are all you need to set up and operate the TV

in its basic configuration.

*(,,.) .Most devices VCRs DVD player etc come with the necessary cable for connection

If you want to set up a complex system you may need to buy extra cable connector etc,,,.

9

PREPARATION

6

Instruction Manual

Instruction

Manual

TV

AC adapter

POWER

FAVCH +

PMODE

SAP

YPBPR

TV

AV

HDMI

CHLIST

FAVLIS T

ADDERASE/

AUDIOLIST

SVIDEO

FAVCH -

SMODE

PC

ASPECT

FREEZE

MENU

EXIT

EPG

/

CC

EPG

PREPARATION

TV

7

PREPARATION

Front view

SOURCE

1- Selecct the input signals/Exit the menu

2- MENU/ENTER

3- Volume down adjustment

4- Volume up adjustment

5- TV channel down adjustment

6- TV channel up adjustment

7- Power On/Off

(SOURCE)

(MENU)

(VOL-)

(VOL+)

(CH-)

(CH+)

(POWER)

PREPARATION

PREPARATION

8

LCD TV

DVD

ITEM

2

DVD Open Close/

1

DVD PausePlay/

Front View

ITEM

DESCRIPTION

2DC12VIN

1USB

Power input interface1 12V DC .

()

3 HDMI

5VGA

6 YPbPr

Connects to the composite A V output jacks on your video equipment./

Connects to the S VIDEO output jacks andAudio output jacks on
your video equipment.

-

8CVBS

Used to connect a video signal from a personal computer

.

7S VIDEO-

Connects to a digital set top box or other deceives with a HDMI
interface.

-

The RF input that connects to your VHF UHF antenna or cable./

Connects to the -.sound output port of a personal computer

4 PC Audio

Earphone out interface

.

9 Earphone out

10 RF 75Ω

()

LCD TV

TV

Connects the YPbPr output jacks on your video equipment.

Used to only update the programme.

1

POWER

2

3

4

5

6

7

8

EARPHONE

OUT

9

10

RF

PREPARATION

9

PREPARATION

Direct Channel selection numbers.

Press to enter a program number of multiple program channel.

Two bit TV channel select.

Press to turn TV set on or off.

MUTE

Press to mute sound press again to restore sound,.

2

09-

/ANGLE

3

SAP AUDIO/

Press to Select audio channel Select AUDIO mode in DVD mode./ ( ).

5

CC SUBTITLE/

6

Volume up down./

VOL+/-

7

CH+/-

Channel up down./

8

DISPLAY

Press to display the source and channel s information’

9

Return your latest program Select DVD picture angle../

4

ENTER

10

Allows you to move select and setup the OSD options,.

1

MENU

11

EXIT EPG D SETUP//.

12

ASPECT

INPUT

13

FREEZE

14

17

20

21

15

18

SLEEP

16

19

Sets .the TV sleep time

Brings up the main menu to the screen

Remote Control

Press FAV CH to change backward Fav channel for TV Play with different speed/.+ .

Press FAV CH to change forward Fav channel for TV Go to the files time preriod that you want to play./ .-

Press to open the favorite channel list DVD Play or Pause./ .

Exit from the current menu Press to display Electronic./
Programme Gudie menu Brings up DVD SETUP menu to./
the screen DVD Mode().

Press to select the aspect ratio.

Press to select various input sources.

Freezes picture press again to restore normal viewing,.

Press ADD ERASE to add or delete Favorite channel DVD Stop/./ .

Press to display the closed caption To switch the dialogue at the./
bottom of the screen.

-/ +10

PREPARATION

PREPARATION

10

FAV LIST/

ADD ERASE//

FAV CH+/

FAV CH GOTO-/

2

3

5

6

8

7

9

4

10

1

11

12

13

14

17

20

21

15

18

16

19

POWER

PREPARATION

11

PREPARATION

LCD TV

Remote Control

PMODE

22

30

35

Select picture mode.

EPG/

SMODE

TITLE

PROG

REPEAT

D MENU.

INTRO

AB-

23

24

25

26

31

27

32

28

33

29

34

Select sound mode.

DVD Forward.

DVD Backward.

Bring up the DVD menu to the screen.

Change the display effect edit the playing order/.

Select repeat mode.

Bring up the DVD menu to the screen.

If you play CD it will scan program with 3s,.

Repeat from A to B.

Press to display Electronic Programme Guide menu
directly when your TV set is in digita TV mode.
/.DVD OPEN

Open the channel list of all received channels
/.DVD Previous

Press to display a audio program list menu.
/.DVD Next

TV AV SVIDEO PC YPBPR HDMI DVD// // / /

Just Hotkeys for INPUT sources
Press TV to select TV input sources.
Press AV to select AV input sources.
Press SVIDEO to select S VIDEO input sources-.
Press PC to select PC input sources.
Press YPBPR to select YPBPR input sources.
Press HDMI to select HDMI input sources.
Press DVD to select DVD input sources.

.

CHLIST/

AUDIOLIST/

22

22

23
24

26

25

27

33

28

31

32

35

34

29

30

Remote Control

Effective range

Note :

Installing the batteries in your remote control

Do not use caustic cleaners porcelain stainless steel toilet or oven cleaner etc( , , , , ...).
You may cause damage to your remote control.

Your remote control can be activated from up to the TV 5m away if pointed directly,

in front of the device.

1

2

3

Pull the tab of the back cover and pull up on
the cover to open the battery compartment
of the remote control.

Insert two AAA size batteries.
Make sure to match the and ends of(+) (-)
the batteries with the and ends indicated(+) (-)
in the battery compartment.

Align the lower tabs of the back cover to the
remote control and snap the cover into place.

PREPARATION

PREPARATION

12

5M

O

30

O

30

If the TV does not display any picture please check all the connections,.

Press the button to turn your TV on.POWER

Press the button to enter TV mode.INPUT

Press the button to change channel number+- ,
or use the buttons to select a channel.

CH /

09-&

–

Press the button to alternate back and forth
between the current and previous channel.

Press the button to adjust the volume.
Press the button to turn the sound off.
Press again to turn the sound on.

VOL +/-

MUTE

Press the button th display the information such
as the channel and channel label.

DISPLAY

1

2

3

4

5

6

Using the Features

13

USING THE FEATURES

USING THE FEATURES

USING THE FEATURES

13

5

2

1

3

6

3

5

4

Note: Select the menu language before operating the TV

(, ).see page 14 MENU LANGUAGE

First Time Installation

NOTE If this is the first time you run the LCD TV
the Initial Setup Menu will appear in the picture
and the items of this menu also exist in other
menus so you are able to change the values arter
you set them up

:,

,

,

.

Tuning Band

Init ial Se tup Me nu

Auto Channel Search

Air

Me nu Lang uage English

To Move

To Exit

To S e l e c t

ENTE R

MUEN

Menu language

Menu Operation

Basic operation

Initial Setup Menu

Tuning Band

Auto Channel Search

Press button then press botton to select the OSD language,.to select this item

Select mode Available tuning band mode()
If sets Air the range of channel is 2 69 and if sets Cable the range of channel is 1 135--

.:,

,,, .

Tuning Band Air cable

Note The OSD On Screen Display function enables you to adjust the screen status()
conveniently since it provides graphical presentation:.

Press button then press botton to enter the Auto
Channel Search Program.

,to select this item

ENTER

ENTER

15

USING THE FEATURES

USING THE FEATURES

12

14

TV Menu

Volume

50

Pi ctu re

So und

Cha nne ls

Se tti ngs

Brig htness

Sharpness

Contrast

Tint

Colo r

Picture Mode

User

Advanced Video

50

50

50

50

50

Move

Picture

Menu Exi t

To Move To ExitTo S e l e c t

ENTER

MUEN

Picture

Sound

Channel s

Settings

Time Set

Closed Caption

Input Labels

Menu Setting

Pare ntal Cont r ol Men u

Move

Set ti ngs

Menu Exit

Reset

To Move To ExitTo S e l e c t

ENTER

MUEN

Picture

Sound

Channels

Settings

Balanc e

Audi o L anguag e 1

Advanced Audio

Audio Channel

5 Band Equalizer Mode Us er-

Audi o L anguag e 2

32

En glis h

Stereo

Mo ve

Sound

Menu Exit

En glis h

To Move To ExitTo Select

ENTE R

M UEN

Picture

Sound

Channels

Settings

Auto Channel Search

Channe l Labels

TuningBand Cable

Move

Channel

Menu Exit

Manu al Add Channel

Manual Channel Set

Favorite Channels

To Move To ExitTo Select

ENTER

MUEN

Volume adjustment

OSD Adjustment

OSD Adjustment

1 Press VOL button adjust the volume+/-..to

-Press MENU button display the main menu.to

Note The OSD On Screen Display in this document may be different from your TV s()
because this is just an reference for your product

: ',

.

You can select the input sourse by pressing input button on
the remote conteol or on the front panel display the main

menu..

to

-Press button select the available menus/.to

2 Press button mute the TVMUTE.,

.

to Press button again or button to

cancel the mute function

MUTE VOL+/-

Source List

CompLosite 1()AV

S video 2-()AV

Component AV3()

VGA PC AV4/( )

HDMI DVI A/(V5)

TV

To Move ToSe lectENTE R

USING THE FEATURES

USING THE FEATURES

15

TV Menu

PICTURE menu options

Press button on the front panel or the remote control to display
the main menu.

MENU

-

MENU EXIT/

.,

.

Press button repeatedly to adjust the

value After finishing your adjustment press

button to save and return back to the

previous

- button to selectPress menu

button to enter

PICTURE then

press

,

.

- button to
.

Press select the item you want to

adjust

Picture Mode

Select picture mode in menu Available picture mode Standard vivid bright user.( : , .)
You should set the picture mode to user first if you want to change the value of Contrast/
Brightness Colour Tint///

PICTURE ,,

""

.Sharpness

TIPS:

Contrast

Brightness

Color

Sharpness

Advanced Video

Gradient enable

3D Y C/

Noise reduction

Color Temperature

Tint

Press button and then use to adjust the contrast of the picture▲/▼ .to select this item,

Press button to select this item and then use to adjust the brightness of the picture.,

Press button and then use to adjust the colour .to select this item,

Press button and then press botton to adjust .,to select this item

Press button and then press botton to adjust .,to select this item

Press button and then press botton to enter .,to select this item

Press button and then press botton to,to select this item select on or off .

Press button and then press botton to,to select this item select on or off .

Press button and then press botton to select

(///).available noise reduction off low medium high

,,

:

to select this item

Press button and then press botton to select cool/
normal warm/.

,

.

to select this item

USING THE FEATURES

12

16

Picture

Soun d

Chann els

Set ting s

Brigh tn ess

Sharpness

Contrast

Tint

Color

Picture Mode Standard

Advanc ed Video

50

50

50

50

50

Move

Pictur e

OK Menu Exit

To Mo ve

To Exit

To S e l e c t

ENTER

MUEN

You can select the picture mode directly by pressing button repeatedly.PMODE

Aspect Ratio

Press button and then
press botton to select available.(
aspect ratio normal zoom wide cinema )

,

:,,, .

to select this item

Picture

Soun d

Chann els

Set tings

Move

Picture AdvancedV ideo

OK Menu Exit

Color Temperature

3D Y C/

Noise Reduction

Aspect Ratio Normal

Gradient Enable

Blue Screen On

Norm al

On

Off

Off

To Move To ExitTo S e l e c t

ENTER

MUEN

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

Blue screen

Press button and then

press botton to select on or off .

,to select this item

ENTER

ENTER

ENTER

ENTER

SETUP

TV Menu

SOUND menu options

Press button on the front panel or the remote control to display the main menu.MENU

USING THE FEATURES

USING THE FEATURES

USING THE FEATURES

17

Pictur e

Sound

Channels

Settin gs

Balance

Audio Language 1

Advanced Audio

Audio Channel

Equa lize r M ode User

Audio Language 2

0

English

Stereo

Move

Soun d

OK Menu Exit

English

To Mov e To ExitTo S e l e ct

ENTER

MUEN

Equalizer mode

Press button and then press botton to select the sound
equalizer mode.

,to select this item

Press button and then press botton to adjust the sound balance .,.to select this item

Picture

Soun d

Cha nnels

Settings

Sound Advanced Aud io

5 Band Equalizer Set-

Audio On ly

5 Ban d Equal iz er o-n

To Move To ExitTo Selec t

ENTE R

MUEN

Picture

Soun d

Cha nne ls

Settings

Move

OK Menu Exit

5BandEqualizerSet-

120H z

00000

500Hz 1 5KHz 5KHz 10 KHz.

To Move

To Exit

To Select

ENTER

MUEN

5 band equalizer-

Audio only

/.press button to exitMENU EXIT

Press button adjust .to the value

Press button to adjust .to select the item you want

Press button and then press botton to enter .,to select this item

Press button then press botton to select .,to select this item

Note it only can be adjusted when the is selected: Equalizer Mode User"".

-

MENU EXIT/

.,

.

Press button repeatedly to adjust the

value After finishing your adjustment press

button to save and return back to the

previous menu

- button to selectSOUNDPress menu then

press button to enter,.ENTER

-/button to
.

Press select the item you want to▲▼

adjust

Audio channel

Advanced audio

Balance

Press button and then press botton to select available.(
audio channel mono stereo sap )

,

:, ,.

to select this item

Press button and then press botton to enter

.

,to select this item

Advanced

audio mode.

ENTER

ENTER

ENTER

ENTER

ENTER

( )Available equalizer mode user standard movie music news:, , , , .

TV Menu

Channels menu options

Pic ture

Soun d

Chann els

Settings

Auto C hannel Search

Channel Labels

Tuning Band C able

Move

Channel

OK Menu Exit

Manual Add Channel

Manual Channel Set

Favorite Chann els

To Move

To Exit

To S e l e c t

ENTER

MUEN

-

MENU EXIT/

.,

.

Press button repeatedly to adjust the

value After finishing your adjustment press

button to save and return back to the

previous menu

- button to select the channelsPress menu then

press button to enter,.ENTER

- button to
.

Press select the item you want to

adjust

Press button on the front of panel or the remote control to display the main menu.MENU

Tuning band

Auto channel search

Auto channel search

In DTV mode you can refer the strength of the
current channel and you can tune manually and
adjust the angle orientation of the antenna etc

,

,

,.

Press button then press botton to select or .Air Cable,to select this item

Press button then press botton to enter the

.

,to select this item Auto

channel scan program

Press button then press botton to enter the.manual

channel set

,to select this item

program

If sets air the range of channel is 2 69 and if sets cable the range of channel is 1 135--,,, .

ENTER

ENTER

ENTER

ENTER

Picture

Sound

Channels

Settings

Mo ve

OK Menu Exit

Channels Auto Channel Search

0%

Digita 0

Analog 0

To Exit

MENU To E x i tMUEN

Picture

Sound

Channels

Settings

Move

Channels Manual Add Channel

OK Menu Exit

Channels Type

Signal Str eng

Physical Cham

Now 0 Peak 24

2

Digital

To Move To ExitTo Sel ect

ENTE R

MUEN

15

USING THE FEATURES

USING THE FEATURES

12

18

SETUP

TV Menu

Manual channel set

Favorite channels

Channel labels

Channel labels

Press button then press botton to enter .,to select this item

Press button then press botton to enter the

.

,to select this item Favorite

channels program

Press button then press botton to enter,.to select this item

Press button ,.to select the position of letter then press button to set the name
Press buttonENTER .to perform your selection

Press button .to select skipped or viewable

Press button ,

,

.

to set the current channel to your favorite channel if the current
channel already be one of your favorite channel press button again will set it
to a normal channel

This function will add the channels not found before and will not delete the channels
unavallable at present,.

Picture

Sound

Channels

Settings

Channels List

Mov e

Channels Manu al Channel Set

OK Menu Exit

Ch 60- Vie wable
Ch 71- Ski pped

Ch 10 1 Viewable-

Ch 11 1 Skipped­Ch 12 1 Viewable-

To Move

To Exit

To S e l e c t

ENTER

MUEN

Picture

Sound

Channels

Settings

Favorite C hannels

Mov e

Channels Favorite Channels

OK Menu Exit

Ch 6 0­Ch 7 1 KBS D--2
Ch 10 1 WCA U D T-­Ch 11 1 WPIX DT-­Ch 12 1 WPIX DT--

To Move

To Exit

To S e l e c t

ENT ER

MUEN

Channel Labels Menu

Ch 6 0-

To Move

To Exit

To Select

ENTER

MUEN

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

14

USING THE FEATURES

USING THE FEATURES

19

17

SETUP

TV Menu

Settings menu options

Press button on the front of panel or the remote control to display the main menu.MENU

USING THE FEATURES

20

Picture

Sound

Channels

Settings

Time Set

Close d Ca ption

Input La bels

Menu Setting

Parental Control Menu

Mo ve

Set ting s

OK Menu Exit

Reset

To Move To ExitTo S e l e c t

ENTER

MUEN

-

/

.,

.

Press button repeatedly to adjust the

value After finishing your adjustment press

button to save and return back to the

previous menu

MENU EXIT

-Press menu then

press button to enter,.

button to select the feature

ENTER

-Press select the item you want to

adjust

button to

.

Parental control menul

Input password to enter default password is 0000,"".

Press button then press botton to enter,.to select this item

Picture

Sound

Channels

Settings

EnterPassword

Move

Parental Controls Menu

OK Menu Exit

To Move To Ex itTo S e l e c t

ENTER

MUEN

Pic ture

Soun d

Channels

Set tings

Move

Parental Controls

OK Menu Exit

Canadian Ratings

Advanced Rating

Advanced Parental Lock

US Ratings

On

To Move To ExitToSelect

ENT ER

MUEN

Pass word Set

ENTER

ENTER

SETUP

TV Menu

USING THE FEATURES

USING THE FEATURES

12

21

Move

US Rating Menu

Select Exit

MPAA

TV Rating

All

NONE

FV L S V D

NONE

TV Y-G

PG

PG 13-

R

X

NC 17-

TV MA-

TV 14-

TV PG-

TV G-

TV Y7-

To Move To ExitTo S e l e c t

EN TER

MUEN

Move Select Exit

NONE

C

C8+

G

PG

18+

14+

Canadian Rating Menu

Canadian English Canadian French

G

8ans+

NONE

13 ans+
16 ans+
18 ans+

To Move To ExitToSelect

ENTER

MUEN

Picture

Sound

Channels

Settings

Move

RRT5

OK Menu Exi t

Intelligence Level

Erotic level 20CHARS

Humor Level

To Move

To Exit

ToSelect

ENTER

MUEN

Us ratings

Press button then press botton to enter,.to select this item

ENTER

Canadian ratings

Press button then press botton to enter,.to select this item

ENTER

Advanced rating

Advanced parental lock

Humor level

Press button then press botton to select on or off,.to select this item

Advanced parental lock is unavailable when the advanced rating at off.

Note when the code stream have V CHIP information display the RRT5 menu-:,.

Press button then press botton to enter,.to select this item

Press button then press botton to enter,.to select this item

ENTER

ENTER

ENTER

21

SETUP

TV Menu

USING THE FEATURES

USING THE FEATURES

12

22

Picture

Sound

Channels

Settings

Move

RRT5

OK Menu Exit

Intelligence Level

Erotic level 20CHARS

Humor Level

DH
MH
H
VH
EH

To Move

To Exit

To S e l e c t

EN TER

MUEN

Picture

Sound

Chan nels

Settings

Mo ve

RRT5

OK Menu Exit

Intelligence Level

Erotic level 20CHARS

Humor Level

VL
LL
NL
HL
VH
TEST MAX-

To Move

To Exit

To Se lect

ENTER

MUEN

Picture

Sound

Chan nels

Setting s

Mo ve

RRT5

OK Menu Exit

Intelligence Level

Erotic level 20CHARS

Humor Level

Low
Med ium
++ ++High

To Move

To Exit

To S e l e c t

ENT ER

MUEN

Intelligence level

Intelligence level

Press button then
press botton to enter,.

to select this item

Press button

then press botton to enter,.

to select intelligence level

Press button

then press botton

to enter,.

to select erotic level

20CHARS

Press button then press botton to enter,.to select this item

Press button then press botton to enter,.to select this item

Press button then press botton to enter,.to select this item

Press button

.

,

.

to set the current
channel to lock if the current channel
already lock press button again
will unlock

Press button

.

,

.

to set the current

channel to lock if the current channel
already lock press button again
will unlock

Press button

.

,

.

to set the current
channel to lock if the current channel
already lock press button again
will unlock

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

ENTER

22

SETUP

TV Menu

USING THE FEATURES

USING THE FEATURES

1223

Parental Control Menu

To Move

To Exit

ToSelect

ENTER

MUEN

Pictur e

Sound

Channels

Settings

New Pass word

Confirm Password

Time Set Menu

Time

Date

Year

Central

2009

Feb 12-

028:

Time Set Menu

Time Zone

Auto

To Move

To ExitTo S e l e c t

MUEN

Time zone

Password setting

Time set menu

Time set

Press button then press botton to select the time zone
for your TV,.

to select this item

You should set the Time Set Mode to Manual first if you want to change the value of
Time Zone Year Date Time// /

""

.

Input the new password and confirm it.

Press button then press botton to,

..

to select this item select Auto or

Manual

ENTER

ENTER

23

SETUP

TV Menu

USING THE FEATURES

12

24

Picture

Sound

Cha nn els

Settings

Move

Settings close ca ption

OK Menu Exit

Analog CC

Digital C C

Adva nced CC Settings

CC Mode

CS1

CC1

CC Off

To Move

To Exit

To S e l e c t

EN TE R

MUEN

Digital Closed Caption

Size

Font

Text Color

Text Opacity

Background Co lor

Background Opacity

Edge Effect

Edge Color

Red

Solid

Non e

White

Solid

White

Default

Automatic

DECIDE D BY AUTO

Style Automatic

Move Exit

To Move To ExitTo S e l e c t MUEN

Closed caption

Press button and then press botton to closed caption
menu,.

to select this item

ENTER

Advanced CC settings

Press button and then press botton to enter .,to select this item

CC Mode

Analog CC

Digital CC

Press button then press botton to select Available.(
CC mode CC off CC on CC on Mute// )

,

:.

to select this item

Press button then press botton to select Available
Analog CC CC1 CC2 CC3 CC4 TEXT1 TEXT2 TEXT3 TEXT4

,.

:,,,,,,,.

to select this item (

)

Press button then press botton to select Available
Digital CC CS1 CS2 CS3 CS4 CS5 CS6

,.

:,,,,,.

to select this item (

)

ENTER

ENTER

ENTER

ENTER

USING THE FEATURES

24

SETUP

TV Menu

USING THE FEATURES

USING THE FEATURES

25

Picture

Sound

Channels

Settings

Move

Settings Menu Setting

OK Menu Exit

Transparency

Lan guag e English

9

S lee p Timer off

To Move

To Exit

To S e l e c t

ENTER

MUEN

-Style: ,
.

Press button to select CC Style between Automatic and custom you need

to Custom first if you want to change the value of items below

-/Size:.Normal large and Small

-///////Background color:.Black White Red Green Blue Yellow Magenta Cyan

-///////Text color:.Red Green Blue Yellow Magenta Cyan Black White

-/////Edge effect:.none raised depressed uniform left shadow right shaw

-Font:.From Font1 to Font7

-///Background opacity:.solid flashing transparent translucent

-///Text opacity:.solid flashing transparent translucent

-//////Couleur du tranchant:.Black White Red Green Blue Yellow Magenta Cyan/

ENTER

Menu setting

Language

Transparency

Sleep timer

Input lables

Press button and then press botton to enter .,to select this item

Press button and then press botton to silect language .,to select this item

Press button and then press botton to adjust.,to select this item

Press button and then press botton to adjust.,to select this item

Press button and then press botton to adjust.,to select this item

ENTER

ENTER

ENTER

ENTER

ENTER

Picture

Soun d

Cha nn els

Set tin gs

Move

Settings Input Labels

OK Menu Exit

Com posite

HDMI DVI/

SVideo-

VGA PC/

Com ponent

Input L abels

Set Top Box

VCR

PC

Sa tellite

To Mov e To ExitToSelect

ENTER

MUEN

d

PC

off

SETUP

TV Menu

USING THE FEATURES

1226

Pic tur e

Sound

Chan nels

Settings

This will reset Picture
sett ings to f actory mode.
Doyouwanttocontinue?

Move

Setti ngs Reset

OK Menu Exit

Yes No

To Move To Ex itTo S e l e c t

ENTER

MUEN

Pictur e

Sound

Channels

Settings

Time Set

Input Labels

Menu Settin g

Move

Settings

OK Men u E xit

PC Settings
Reset

To Move

To Exit

To Selec t

ENT ER

MUEN

Auto adjustment

Clock

Vertical position

Phase

Horizontal position

Press button and then press botton to auto adjust.,to select this item

Press button and then press botton to adjust.,to select this item

Press button then
press botton to adjust.

,to select this item

Press button and then press botton to adjust.,to select this item

Press button then
press botton to adjust.

,to select this item

ENTER

PC setting

Note pc settings is only used for pc source

:.

Reset all items to default value when select Yes.

Settings menu options

Reset

Press button then press botton to enter.,to select this item

ENTER

Picture

Sound

Chan nels

Settings

Mo ve

Settings PC Setting

OK Menu Exit

Vertica l P osition
Pha se
Cloc k
Auto Adjustment

Horizontal Position 50

50
50
50

To Mov e

To Exit

ToSelect

ENTER

MUEN

RESET

USING THE FEATURES

SETUP

TV Menu

EPG Electronic Programme Guide options()

USING THE FEATURES

USING THE FEATURES

1227

Move Select Exit

Will Grace&

15 30 16 00:-:

Friends

16 00 1 6 30:-:

Everybo dy Lov..
17 00 8 50:-:

.

Will Grace 15 30 16 00&(:-:)

No prog ram des cription

To Move

To Exit

E PG

EPG

Move Select Ex it

Audi o Lis t

Ch 6 0­Ch 7 1 KBS D--2
Ch 10 1 WCAU DT-­Ch 11 1 WPIX DT-­Ch 12 1 WPIX DT-­Ch 13 1 WPIX DT-­Ch 14 1 WPIX DT--

To Move

To S e l e c t

ENTER

Move Select Exit

Favorite List

Ch 6 0­Ch 7 1 KBS D--2
Ch 10 1 WCAU DT-­Ch 11 1 WPIX DT-­Ch 1 2 1 WPIX D T--

To Move

To Se l e c tENTER

An Electronic Programme Guide EPG is provided by the programme providers To access
this press the EPG button on the remote control
The EPG provides programme information for the next number of hours

"" .

.

.

The current program s
name and start stop time

'

-.

The brief introduction of
the current program Some

programs have no description()

Audio List

Fav list

Press button .to select the different duration time

Press button .to select the audio channel

Press button ,.AUDIO LIST on the remote control the audio list menu will appear as follows

Press button ,.FAV LIST on the remote control the favorite list menu will appear as follows

Press button channel then press

botton to set the current channel to your favorite channel it the

current channel already be one of your favorite channel press

buttun again will set it to a normal channel

,

,

,

.

to select this

ENTER

ENTER

SETU

TV Menu

USING THE FEATURES

USING THE FEATURES

12

28

Move Select Exit

Channe l L ist

Ch 6 0­Ch 7 1 KBS D--2
Ch 10 1 WCAU DT-­Ch 11 1 WPIX DT-­Ch 12 1 WPIX DT-­Ch 13 1 WPIX DT-­Ch 14 1 WPIX DT--

To Move

To S e lect

ENT ER

CH List

Press CH List button on the remote contol the channel list menu will appear as follows,.

Press button the channel then press botton to view.ENTER,to select

USING THE FEATURES

USING THE FEATURES

1229

DVD SETUP MENU

USING THE FEATURES

USING THE FEATURES

12

30

DVD SETUP MENU

SETUP

USING THE FEATURES

USING THE FEATURES

1231

26

SPECIFICATIONS

,ATSC NTSC

DC 12V 6A,

23W

< 60W

S VIDEO input-

22 inch LCD panel

1

1

1

1

1

Earphone out

Panel System

Display Resolution

Television System

Inputs Output

CVBS input AUDIO L R

/

/(/)

HDMI input

VGA input

Speaker Out

Power Mains adaptor

Power Waste

OSD language

1

P AUDIOC

1

YPbPr input

Power requirement

AC100 240V 50 60Hz-~,/

NOTE:

1 This user manual is for reference only Specifications are subject

to change without notice

2 This unit only can support voltage input range from 11V 24V

..

.

. .–

1366 H 768 V()* ()

English, France, German, Itanlian