Magic Chef MCWC45MCG User Manual
W
ine Coole
r
r
Model No. MCWC16MCG MCWC45MCG
Wine Coole
. Before Putting Into Use . . . . . . . . . . . . . . . . .
. Important . . . . . . . . . . . . . . . . . . . . . . . .
. Placing and Installation . . . . . . . . . . . . . . . . .
. Description of the Appliance . . . . . . . . . . . . . . .
. Temperature Control . . . . . . . . . . . . . . . . . . .
. Maintenance and Cleaning . . . . . . . . . . . . . . . .
. Trouble Shooting Guide . . . . . . . . . . . . . . . . .
. Changing The Reversible Door . . . . . . . . . . . . . . . . . .
. Wine Cooler Warranty . . . . . . . . . . . . . . . . . .
CAUTION:
Read and follow all safety rules and operating
instructions before first use of this product.
2
3
4
5
5
7
8
10
11
.
.
A
.
W
W
ine Cooler
Thank you for buying this appliance.
We hope it will successfully serve your requirements for many years.
SAVE THESE INSTRUCTIONS
Before Putting Into Use . . . . . . . . . . . . .
To Assemble Door Handle
Instructions for Use
Tips for Energy Savings
Important . . . . . . . . . . . . . . . . . . . .
Disposing of Worn Out Appliances
Placing and Installation . . . . . . . . . . . .
Choosing the Right Place
Placing the Self-standing Appliance
Connection to Power Supply
Description of the Appliance . . . . . . . . . . . .
Temperature Control . . . . . . . . . . . . . .
Temperature Selection
Illustration of the Appliance
Maintenance and Cleaning . . . . . . . . . . . . .
utomatic Defrosting of the appliance
Cleaning of the Appliance
Switch Off the Appliance When Not In Use
Trouble-Shooting Guide . . . . . . . . . . . . . .
Changing The Reversible Door . . . . . . . . . .
2
3
4
5
5
7
8
10
ine Cooler Warranty . . . . . . . . . . . . . . . 11
1
y
Before Putting Into Use
Before connecting the appliance to electrical
To Assemble Door Handle
(Door handle assembling
for MCWC16MCG & MCWC45MCG )
To save shipping space and avoid damage of
the unit during transportation, the door handle
of this unit is shipped unassembled. Before
putting the unit into use you are kindly asked to
assemble the door handle as follows:
Locate the door handle and 2 screws attached
.
inside the cabinet, and prepare an appropriate
screwdriver.
With the 2 screws attached, fasten the door
.
handle onto the frame of the door panel as
illustrated. Be sure that the screws must point
to the holes on the frame of the door panel
when doing so.
·
power supply, leave it to stand for about 4 hours,
which will reduce the possibility of malfunctions
in the cooling system due to transport handling.
Clean the appliance thoroughly, especially in the
·
interior (See Cleaning and Maintenance).
In case the interior accessories are not correctly
·
placed, rearrange them as described in chapter
"Description of the Appliance".
Instructions for Use
These instructions for use are intended for the user.
They describe the appliance and correct operating
procedures for safe use .
SAVE THESE INSTRUCTIONS:
Tips for Energy Saving
Try not to open the door too often, especially when
·
the weather is hot and humid. Once you open the
door , close it as soon as possible. This is
especially important if you have an upright model .
Ever
now and then check if the appliance is
·
sufficiently ventilated ( adequate air circulation
behind the appliance ).
Set the thermostat from higher to lower settings as
·
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).
If the gasket is damaged or the door seal is poor,
·
energy consumption is substantially higher. To
restore efficiency, replace the gasket.
Always consider instructions stated in sections
·
Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher.
2
Important
If you have bought this appliance to replace
·
an old one equipped with a door lock that
cannot be opened from the inside (lock, bolt),
make sure that the lock is removed, disabled
or destroyed before discarding. This will make
it impossible for children to accidentally lock
themselves inside the appliance and suffocate.
To avoid risk of child entrapment, leave the
·
shelves in place so children can not easily
climb inside even when the appliance is in
routine use or not in use at home.
The appliance must be properly connected to
·
an electrical power supply. (See: Connection
to Power Supply) .
Do not use an extension cord.
·
·
Always disconnect the appliance from the
power supply before cleaning the appliance,
or attempting repairs.
WARNING:
.
Repairs should be performed by qualified
service personnel only.
·
Do not defrost the appliance with other electric
appliances (for example a hair dryer) and
never attempt to scrape/remove ice/frost with
sharp objects.
·
The cooling system of the appliance is filled
with refrigerant and oil ,so when the appliance
is damaged, handle it with care and dispose
of it in compliance with environmental
protection safeguards.
·
The rating plate containing Model No and
other technical data specific to this unit, is
located either inside the appliance or outside
on the rear wall.
Disposing of Worn Out Appliances
DANGER OR WARNING: Risk of child entrapment.
·
Before you throw away your old refrigerator or
freezer:
-Take off the doors
- Leave the shelves in place so children may not
easily climb inside.
The cooling system of the appliance is filled with
·
refrigerant and insulating substances which should
be separately treated and processed. Call your
nearest authorised service agent. If you are unable
to locate one, contact your local authorities or your
distributor. Be careful not to damage the tubes on
the rear wall of the appliance (danger of pollution).
3
Loading...