ine Coole
Model No. MCWC16M MCWC30M
Wine Coole
. Before Putting Into Use . . . . . . . . . . . . . . . . .
. Important . . . . . . . . . . . . . . . . . . . . . . . .
. Placing and Installation . . . . . . . . . . . . . . . . .
. Description of the Appliance . . . . . . . . . . . . . . .
. Operation Control . . . . . . . . . . . . . . . . . . . .
. Maintenance and Cleaning . . . . . . . . . . . . . . . .
. Trouble Shooting Guide . . . . . . . . . . . . . . . . .
. Limited Warranty . . . . . . . . . . . . . . . . .
CAUTION:
Read and follow all safety rules and operating
instructions before first use of this product.
2
3
4
5
5
6
7
8
9
10
ine Coole
Thank you for buying this appliance.
We hope it will successfully serve your requirements for many years.
This appliance is intended for storing bottled wine in the temperature
range of 5.5 to 19.0 / 41.9
SAVE THESE INSTRUCTIONS
o
F to 66.2oF
Before Putting Into Use . . . . . . . . . . . . .
Instructions for Use
Tips for Energy Savings
Important . . . . . . . . . . . . . . . . . . . . .
Disposing of Worn Out Appliances
Placing and Installation . . . . . . . . . . . . .
Choosing the Right Place
Placing the Self-standing Appliance
Connection to Power Suppl
Description of the Appliance . . . . . . . . . . . .
Temperature Control . . . . . . . . . . . . . .
Temperature Selection
Illustration of the Appliance
Maintenance and Cleaning . . . . . . . . . . . . .
utomatic Defrosting of the appliance
Cleaning of the Appliance
Switch Off the Appliance When Not In Use
2
3
4
5
5
6
7
Trouble-Shooting Guide . . . . . . . . . . . . . . .
Limited Warranty . . . . . . . . . . . . . . . .
1
8
9
10
Before Putting Into Use
Before connecting the appliance to electrical
·
power supply, leave it to stand for about 2 hours,
which will reduce the possibility of malfunctions
in the cooling system due to transport handling.
Clean the appliance thoroughly, especially in the
·
interior (See Cleaning and Maintenance).
In case the interior accessories are not correctly
·
placed, rearrange them as described in chapter
"Description of the Appliance"
These instructions for use are intended for the user.
They describe the appliance and correct operating
procedures for safe use .
SAVE THESE INSTRUCTIONS:
Tips for Energy Saving
If the gasket is damaged or the door seal is
·
poor, energy consumption is substantially
higher. To restore efficiency, replace
the gasket.
Always consider instructions stated in
·
sections Positioning and Energy Saving
Tips, otherwise the energy consumption is
substantially higher.
Remove shipping bracket at base of
·
door opening and replace the foot
before operating this appliance.Instructions for Use
Try not to open the door too often, especially when
·
the weather is hot and humid. Once you open the
door , close it as soon as possible. This is
especially important if you have an upright model .
Every now and then check if the appliance is
·
sufficiently ventilated ( adequate air circulation
behind the appliance ).
Set the thermostat from higher to lower settings as
·
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).
Ice and frost layers increase energy consumption,
·
so clean the appliance as soon as the frost layer
is 3-5mm thick.
2