Magic Chef MCWBC24DST User Manual
PLEASE READ THIS MANUAL CAREFULLY BEFORE USING YOUR
WINE AND BEVERAGE CENTER AND KEEP IT FOR FUTURE REFERENCE.
Wine and Beverage Center
User's Manual
Model MCWBC24DST
2
EN - 2
Thank you for purchasing a Magic Chef® product. The first step to protect your new
product is to complete the product registration on our website:
www.mcappliance.com/register. The benefits of registering your product include the
following:
Once again, thank you for purchasing a Magic Chef® product.
1. Registering your product will allow us to contact you regarding a safety notification
or product update.
2. Registering your product will allow for more efficient warranty service processing
when warranty service is required.
3. Registering your product could act as your proof of purchase in the event of
insurance loss.
PRODUCT REGISTRATION
3
EN - 3
TABLE OF CONTENTS
PARTS 4
SPECIFICATIONS 4
IMPORTANT SAFETY INSTRUCTIONS 5
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE 5
FREESTANDING INSTALLATION 6
BUILT-IN INSTALLATION 6
ELECTRICAL CONNECTION 7
APPLIANCE FEATURES
DUAL TEMPERATURE ZONES 8
INTERIOR LIGHT 8
ENGAGED WINE SHELVES 8
TO REMOVE A SHELF 8
TO REPLACE A SHELF 8
OPERATING YOUR APPLIANCE
TEMPERATURE CONTROL AND DISPLAY 9
INDICATOR LIGHT 9
LOCK AND UNLOCK 9
TEMPERATURE SETTING 10
INTERIOR LIGHT 10
AUTOMATIC DEFROST 11
CARE AND MAINTENANCE
CLEANING YOUR APPLIANCE 11
VACATION TIME 11
MOVING YOUR APPLIANCE 11
ENERGY SAVING TIPS 11
TROUBLESHOOTING GUIDE 12
WARRANTY 13
4
EN - 4
PARTS
1) Thermostat
2) Temperature Control & Display
(Left Zone)
3) Circulation Fan
4) Interior Light
5) Cabinet
6) Temperature Control & Display
(Right Zone)
7) Drip Pans
8) (10) Sculptured Chrome Shelves
(Wine Storage)
9) (2) Two-Layer Chrome Racks
(Wine Storage)
10) (6) Flat Chrome Shelves
(Beverage Storage)
SPECIFICATIONS
Product Description Wine and Beverage Center
Unit Dimensions
(inches)
Width Height Depth
23.4” 34.4” 24.4”
Net Weight (lbs) 115.7 lbs.
Note: Height includes door cap; Depth includes door handle.
5
EN - 5
IMPORTANT SAFETY INSTRUCTIONS
Before Using Your Appliance
• Remove the exterior and interior packing.
• Before connecting the appliance to the power source, let it stand upright for
approximately 4 hours. This will reduce the possibility of a malfunction in the cooling
system resulting from improper handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth (see Care and
Maintenance instructions on page 11).
INSTALLATION INSTRUCTIONS
To reduce the risk of fire, electric shock and/or
injury when using your appliance, follow these
basic precautions:
Read all instructions before using the wine and beverage center.
DANGER or WARNING: Risk of child entrapment.
To avoid the possibility of child entrapment, please take the following
precautions before throwing out the appliance:
- Remove all doors from the unit.
- Leave the shelves in place so that children may not easily climb inside.
Never allow children to operate, play with, or crawl inside the appliance.
Refrigerants: All refrigeration products contain refrigerants. Under the
guidelines of federal law, refrigerants must be removed before the disposal of
the product. It is the consumer’s responsibility to comply with federal and
local regulations when disposing of this product.
Never clean the appliance parts with flammable fluids. The fumes can create a
fire hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the
vicinity of this or any other appliance. The fumes can create a fire hazard or
explosion.
SAVE THESE INSTRUCTIONS
6
EN - 6
Freestanding Installation
• This appliance is designed to be built-in or freestanding.
• Locate the appliance away from direct sunlight and sources of heat (stove, heater,
radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may
increase electrical consumption. Ambient temperature below 68oF (20oC) or above
90oF (32oC) will hinder the performance of this appliance. This unit is not designed
for use in a garage or any other outside installation.
• Avoid locating the appliance in moist areas.
• Plug the appliance into a dedicated, properly installed grounded wall outlet. This
appliance should be operated on a separate electrical circuit from other operating
appliances. Do not under any circumstances cut or remove the third (ground) prong
from the power cord. Any questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized service center. This unit is not
designed to be installed in an RV or used with an inverter.
• After plugging the appliance into a wall outlet, allow the unit to cool down for
approximately 3-4 hours before placing wine bottles or beverage cans in the
appliance.
Built-In Installation
The cutout dimensions illustrated in
Figure A allow the door to swing open
and also allow access to the pull-out
shelves. If you are installing the unit
between frameless cabinets, a ½” wide
filler strip or side panel may be needed
on the hinge side. The filler strip will act
as a spacer between the appliance case
and the adjacent cabinet door swing.
The width of the opening must include
the filler panels.
Note: The door should protrude at least
1” beyond the surrounding cabinets.
Figure A – The cutout depth must be 24”
7
EN - 7
Electrical Connection
• This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug which mates with standard threeprong wall outlets to minimize the possibility of electric shock.
• Do not, under any circumstances, cut or remove the third ground prong from the
power cord supplied.
• This appliance requires a standard 115V AC / 60Hz electrical outlet with a three-
prong ground.
• This appliance is not designed to be used with an inverter.
• To prevent accidental injury, the power cord should be secured behind the appliance
and not left exposed or hanging.
• Never unplug the appliance by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.
• Do not use an extension cord with this appliance. If the power cord is too short, have
a qualified electrician or service technician install an outlet near the appliance. The
use of an extension cord can negatively affect the performance of the unit.
If any problems with the appliance persist, please contact the Customer Service
Department at 888 775-0202 to consult with a representative. Or, visit our website at
www.mcappliance.com to request warranty service.
Improper use of the grounded plug can result in the risk of electric shock. If the
power cord is damaged, please contact an authorized service center.
8
EN - 8
APPLIANCE FEATURES
Dual Temperature Zones
• There are two zones in this appliance. They are located side-by-side.
• Each zone has its independent temperature control and display.
• Each of the two zones can be used to store wine bottles or beverages.
• Each of the two zones can hold up to 21 bottles or 57 cans.
Interior Light
• Each zone has its own interior light, which can be switched on or off by pressing the
light pad on the control panel. Energy-efficient LEDs are installed for long-term
durability.
Engaged Wine Shelves
• All of the shelves have tabs to engage the cabinet on both sides.
• Any of the shelves can be removed to accommodate larger bottles.
To Remove a Shelf
• Remove all bottles (cans) from the shelves.
• Lift the shelf upward and then gently pull out the shelf.
To Replace a Shelf
• Place the sides of the shelf back onto the
supporting guides of the cabinet and push
back until the shelf tabs slide into place.
Note: Ensure that the tabs are firmly
engaged in place before storing any bottles.
9
EN - 9
Temperature Control and Display
• When the unit is plugged in, the display and pads will illuminate for 3 seconds and an
audible beep will be heard.
• The temperature in the left zone and right zone can be independently controlled and
displayed.
• The temperature in either zone can be controlled between 39oF to 64oF (4oC to 18oC).
(The zone temperature may have a tolerance of +/-5oF (+/-3oC) from the setting
depending on different loading and ambient conditions).
Indicator Light
• When lit, the lock indicator light indicates that all of the control pads are locked
and no adjustment can be made to that zone.
• When lit, indicates that the corresponding zone is in the refrigeration cycle
(compressor is running). The indicator will go off once the desired temperature is
reached.
Note: The light will remain on and the compressor may continue to run for
several minutes after the desired temperature is reached.
Lock and Unlock
• The lock feature is designed to prevent the settings of your wine and beverage center
from being adjusted accidentally. In order to adjust any of the settings you must
unlock the control panel by pressing the lock pad for approximately 3 seconds.
Once the unit is unlocked, an audible beep will be heard and the lock indicator
light will go out.
• If no selection is made to adjust the unit in approximately one minute, the control
panel will automatically return to the lock mode.
• To lock the unit manually, press the lock pad.
OPERATING YOUR APPLIANCE
Loading...