The Magellan RoadMate receiver is a vehicle-navigation aid designed to assist you in arriving at your selected
destinations. When using the Magellan RoadMate receiver, these safety rules must be followed to prevent
accidents that can result in injury or death to yourself or others:
•Please check the applicable regulations in your state regarding windshield mounting. Certain states prohibit
the mounting of any items on your windshield. Go to www.magellanGPS.com for alternative mounting
solutions.
•When driving, the need to view the display is minimal. Voice prompts will guide you to your destination. The
driver should enter data or program the Magellan RoadMate receiver only when the vehicle is stationary.
Only a vehicle passenger should enter data or program the Magellan RoadMate receiver while the vehicle is
moving. Do not become distracted by the receiver while driving, and always be fully aware of all driving
conditions.
•It is your responsibility to comply with all traffic laws and to use the Magellan RoadMate and mounting
options in such a manner that the user is in compliance with applicable laws.
•Roads, points of interest (POIs), business and service locations may change over time. As a result the
database may contain inaccuracy. Also, the database does not include, analyse, process, consider, or
reflect any of the following: legal restrictions (such as vehicle type, weight, height, width, load and speed
restrictions); road slope or gradient; bridge height, width, weight or other limits; population density;
neighborhood quality or safety; availability or proximity of police, emergency rescue, medical or other
assistance; construction work zones or hazards; road or lane closures; road, traffic or traffic facilities' safety
or condition; weather conditions; pavement characteristics or conditions; special events; traffic congestion.
It is your responsibility to disregard any unsafe, hazardous or illegal route suggestions.
•Keep the Magellan RoadMate receiver safe from extreme temperature conditions. For example, do not leave
it exposed to direct sunlight for an extended period of time.
•Take care when mounting the Magellan RoadMate receiver in your vehicle, whether using the windshield
mount or other mounts, that it does not obstruct the driver's view of the road, interfere with the operation of
the vehicle's safety devices such as air bags, or present a hazard to occupants of the vehicle should the
receiver be dislodged while driving. It is your responsibility to assess the risks associated with damage to
your vehicle or vehicle occupants as the result of your choices in mounting the Magellan RoadMate receiver.
Temperature
•The maximum operating temperature is 140°F (60°C).
Battery
•The battery in the Magellan RoadMate receiver is rechargeable and should not be removed. In the event that
it should need to be replaced, please contact Magellan Technical Support.
Charging the Magellan RoadMate
•An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of another type of AC
adapter can result in malfunction and/or possible fire hazard due to battery overheating.
•Only use the car charger approved for/supplied with your Magellan RoadMate receiver. Use of another type
of car charger will result in fire or electric shock.
•For safety reasons, the battery in your Magellan RoadMate receiver will stop charging when the ambient
temperature is less than 32°F (0°C) or more than 113°F (45°C).
•It will take approximately 4 hours of charging the Magellan RoadMate receiver through the vehicle power
adapter or optional AC adapter to obtain a full battery charge. It is recommended that you charge the
battery initially for at least 2 hours.
•Use only the charger approved for your Magellan RoadMate receiver.
•Estimated usage of the Magellan RoadMate on battery power is approximately 2 hours.
i
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for class B digital devices, in accordance
with part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment.
Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV
reception. The user is cautioned that changes and modifications made to the equipment without the approval of
manufacturer could void the user's authority to operate this equipment.
The Magellan RoadMate receiver must be installed and operated at a distance no closer then 8 inches (20 cm)
from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
IC statement
Operation is subject to the following two conditions:
1. This device may not cause interference and
ii
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits established for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The information provided in this document is subject to change without notice. Improvements and enhancements
to the product may occur without any formal notification. Check the Magellan website (www.magellanGPS.com/
support) for product updates and additional information.
All other products and brand names are trademarks of their respective holders.
No part of this user manual may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, for any purpose other than the purchaser's personal use,
without the prior written permission of MiTAC International Corporation.
The information provided in this document are correct at the time that it is created. MiTAC International
Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in the contents of
this User Manual.
Coupons and Offers ......................................................................................................32
Coupons From POI Searches ........................................................................................32
Viewing a Coupon Offer ................................................................................................32
Viewing All Coupons .....................................................................................................32
Table of ContentsMagellan RoadMate 4
Magellan RoadMate SE4/1420/1424 GPS Receiver
The Magellan® RoadMate® receiver is a vehicle navigation product that utilizes GPS signals from satellites to
calculate your precise location and compute navigational information that can be used to guide you to your
destination. Knowing its position and movement, it can then overlay this information on detailed maps to provide
a visual representation of your location.
With the Magellan RoadMate receiver you can:
™
•Save searches and addresses under the OneTouch
destinations.
•Store your home address and quickly get routing details to your home.
•Enter and save addresses in your address book that can be accessed at any time and get routing information
to that address.
•Route to an address that you enter using the QuickSpell
entry.
•Route to any point of interest (POI) that has been preloaded into your Magellan RoadMate receiver.
•Create a route with multiple destinations. Handy for business people who need routing information to many
destinations.
®
•Access the AAA TourBook
providing ratings and descriptions on AAA-approved places to stay, play, dine,
and save. (Magellan RoadMate’s 1420 and 1424 only).
™
•Access AAA Member Roadside Assistance
information from the OneTouch menu. (Magellan RoadMate’s
1420 and 1424 only).
•View POIs that are near exits ahead of you on the highway. The Highway Exit POIs function provides you
with a list of gas stations, restaurants, hotels and auto repair shops located nearby exits you are approaching
while travelling on the interstate.
menu for fast, convenient access to favorite
™
and Smart City search for easy, errorless address
•Customize your Magellan RoadMate receiver to meet your needs using the Settings menu.
•With the optional TrafficLink accessory you can receive traffic information so as to avoid delays in your
travel.
The user interface for the Magellan RoadMate receiver is easy and simple to follow once you understand the
basics. You may never need to refer to this manual, but if you do, we have tried to present it in a form that makes
it easy for you to access the function you are trying to use and follow the steps provided.
The Magellan RoadMate receiver has a built-in battery so, in most cases, you will be able to follow these
instructions while reading them on your computer screen without plugging the Magellan RoadMate receiver to the
AC power using an optional AC power adapter. Note that a fully charged Magellan RoadMate only has about 2
hours of battery life. You should note that while indoors you may not get strong enough satellite signals to
compute your location, so your location information may not be updated. However, the power of the GPS chipset
installed in the Magellan RoadMate receiver will pick up satellite signals in some very demanding locations. You
may find that the Magellan RoadMate receiver is computing a position, even indoors. Even with the improved
GPS chipset, the receiver may not be able to always compute a fix indoors. This is especially important to note if
you are in a garage or other overhanging structure. If you find you are not getting strong enough satellite signals
while in a garage or other structure, move to a location where there is a clear view of the sky and you should
immediately see an improvement in signal strength.
The Magellan RoadMate receiver includes Voice Alerts (both prerecorded and Text-to-Speech) for driving
instructions.
1
Map Coverage
A
B
The Magellan RoadMate SE4 and 1420 have internal maps for the 48 continental United States, Hawaii and
Puerto Rico. The Magellan RoadMate 1424 has internal maps for the 50 United States, Canada and Puerto Rico.
This document is set up to be printed on 8.5" x 11" paper should you desire a printed version for your reference.
Magellan RoadMate
(A) Power Switch
(B) USB connector. Power input from vehicle power adapter cable or optional AC power adapter.
2
Installation Instructions
Installation of the Magellan RoadMate receiver is simple and easy. The hardest part will be picking the best
location.
Selecting the Location
A few tips on selecting the proper location.
•Mount the Magellan RoadMate receiver in a place where it can be easily seen and will not interfere with
your view of the road.
•The Magellan RoadMate receiver should be mounted in such a way that the antenna, (located in the top of
the receiver), has an unobstructed view of the sky through the windshield.
•Make sure that the Magellan RoadMate receiver or any cabling will not be disturbed if the airbags are
activated.
•Select whether it will be mounted using the adjustable mount to the windshield or an adhesive disk. Be sure
to check your local and regional laws before mounting to the windshield. Some states have laws restricting
the mounting of any device on the windshield.
•If planning to use the adhesive disk, a smooth surface on the dash board will need to be selected. Do not
attach the adhesive disk to the windshield nor airbag covers.
Using the Adhesive Disk
If you plan on using the adhesive disk, you will first need to attach it to the dashboard and allow it to cure for 24
hours before continuing. Find a smooth, flat surface and clean it using the alcohol pad supplied.
Remove the protective tape from the back of the adhesive disk. Apply the disk with the adhesive side towards the
dashboard. Maintain pressure on the disk for 5 minutes to allow it to set in place. Allow the disk 24 hours to cure
before continuing.
Securing the Car Cradle to the Windshield or Adhesive Disk
Use the alcohol pad that came with the Magellan RoadMate receiver to clean the area on the windshield that has
been selected for mounting the Magellan RoadMate receiver. Let the area dry completely.
Make sure that the lever at the base of the adjustable mount is in the up
position. Place the base of the car cradle firmly over the area of the
windshield or adhesive disk to be used. Push the lever at the base of the
swivel mount all the way down until it snaps in place. Carefully let go of the
assembly, making sure that it is securely mounted.
(The Car Cradle shown here may be different from the Car Cradle supplied
with your Magellan RoadMate receiver, but the installation is the same for all
cradle styles.)
3
Attaching the Magellan RoadMate receiver to the Car Cradle
Slide the Magellan RoadMate receiver on the car cradle so that the slot on the
Magellan RoadMate receiver aligns with the tab on the car cradle. Slide the
Magellan RoadMate receiver all the way down until it rests on the 'feet'. You should
notice a click when the receiver is fully mounted in the cradle.
Adjusting the Mount for Optimum Viewing
Loosen the adjustment locking knobs and position the Magellan RoadMate receiver
for optimum viewing. Once set, tighten the locking knobs. (Never attempt to adjust
the mount while driving.)
Connecting Power
Plug the end of the vehicle power adapter into a 12VDC vehicle power
receptacle. Connect the other end of the cable to the Magellan RoadMate
receiver's power connector as shown.
Note: Some vehicles apply power to the vehicle power receptacle only
when the ignition is on.
Checking Connection and Final Adjustments
If the power indicator light on the vehicle power adaptor is on, power is being supplied to the Magellan RoadMate
receiver. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not on, turn
the vehicle's ignition on.
Power Switch (Configurations)
The Magellan RoadMate can have two possible power switch configurations. You may have either a switch that
slides and springs back or you may have a receiver with a 3-way power switch.
3-Way Switch
•Slide to the left to turn the
receiver on.
•Slide to the center position
to turn the receiver off.
•Slide to the right to reset
the receiver.
4
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.