Magellan Navigation, Inc. 960 Overland Court, San Dimas, CA 91773
IMPORTANT SAFETY WARNINGS
The Magellan RoadMate is a vehicle-navigation aid designed to assist you in arriving to your selected destinations. When
using the Magellan RoadMate, these safety rules must be followed to prevent accidents that can result in injury or death to
yourself or others:
•When driving, the need to view the display is minimal. The driver should enter data or program the Magellan RoadMate
only when the vehicle is stopped. Only a vehicle passenger should enter data or program the Magellan RoadMate while
the vehicle is moving.
•It is your responsibility to comply with all traffic laws.
•Every attempt is made to ensure that the database is accurate. However, roadways, points of interest (POIs), and
business and service locations may change over time. The database does not include, analyze, process, consider, or
reflect any of the following: legal restrictions (such as vehicular type, weight, height, width, load and speed restrictions);
road slope or grade; bridge height, width, weight, or other limits; population density; neighborhood quality or safety;
availability or proximity of law enforcement, emergency rescue, medical, or other assistance; construction work zones or
hazards; road or lane closures; road, traffic, or traffic facilities’ safety or condition; weather conditions; pavement
characteristics or conditions; special events; traffic congestion. It is your responsibility to disregard any unsafe,
hazardous, or illegal route suggestions.
•Keep the Magellan RoadMate safe from extreme temperature conditions. For example, do not leave it exposed to direct
sunlight for an extended period of time.
•Take care when mounting the Magellan RoadMate in your vehicle, whether using the windshield mount or other
mounting accessories, that it does not obstruct the driver's view of the road, interfere with the operation of the vehicle's
safety devices such as air bags, or present a hazard to occupants of the vehicle should the Magellan RoadMate be
dislodged while driving. You assume the risks associated with damage to your vehicle or vehicle occupants as the result
of your choices in mounting the Magellan RoadMate.
•The battery in the Magellan RoadMate is rechargeable and should not be removed. In the event it should need to be
replaced, please contact Magellan Technical Support.
About Charging the Magellan RoadMate
•An optional AC adapter is available as an accessory for your Magellan RoadMate. Use of another type of AC adapter can
result in malfunction and/or possible fire hazard due to battery over heating.
•Use only the vehicle power cable approved for / supplied with your Magellan RoadMate. Use of another type of vehicle
power cable will result in malfunction and/or damage to the receiver.
•For safety reasons, the battery in your Magellan RoadMate will stop charging when the ambient temperature is less than
32°F (0°C) or more than 113°F (45°C).
•It will take approximately 6 hours of charging the Magellan RoadMate through the vehicle power adapter or optional AC
adapter to obtain a full battery charge.
About the Battery
•Do not attempt to replace the battery. Please contact Magellan Technical Support for issues related to the battery.
•Use only the charger approved for your Magellan RoadMate.
i
IMPORTANT SAFETY WARNINGS
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•-Reorient or relocate the receiving antenna.
•-Increase the separation between the equipment and receiver.
•-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must
follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with
non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
The Magellan RoadMate must be installed and operated at a distance no closer then 8 inches (20 cm) from the user.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada.
ii
IMPORTANT SAFETY WARNINGS
IC statement
Operation is subject to the following two conditions:
1.This device may not cause interference and
2.This device must accept any interference, including interference that may cause undesired operation of
the device.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The information provided in this document is subject to change without notice. Improvements and enhancements to the
product may occur without any formal notification. Check the Magellan website (www.magellanGPS) for product updates and
additional information.
Viewing Technical GPS Information ................................................................... 50
Setting the GPS Position .................................................................................. 50
Backing Up and Restoring Data ........................................................................ 51
Backing Up Data ............................................................................................. 51
Restoring Data ................................................................................................ 51
Viewing Map Information .................................................................................. 51
Table of ContentsMagellan RoadMate5
Magellan RoadMate
The Magellan RoadMate is a vehicle navigation product that utilizes GPS signals from satellites to
calculate your precise location and compute details about its travel. Knowing its position and
movement, it can then overlay this information on detailed maps to provide a visual representation
of your location.
Be sure to check the support page at www.magellanGPS.com/support/ for updates to your Magellan
RoadMate. While you are there, download the Magellan VantagePoint software which can be used to
install the updates quickly and easily.
Another useful tool for your Magellan RoadMate is the Magellan POI Editor, also available at
www.magellanGPS.com/support/. With the Magellan POI Editor you can add custom POIs to your
Magellan RoadMate. Just follow the easy instructions to install the POI Editor.
With the Magellan RoadMate you can:
•Store your home address and quickly get routing details to your home.
•Create and save addresses in your address book that can be accessed at any time and get
routing information to that address.
•Route to an address that you enter using the keypad and Magellan’s QuickSpell feature
for easy, errorless address entry.
•Route to any point of interest (POI) that has been preloaded into your Magellan
RoadMate.
•Route to a POI that appears on the map while traveling simply by tapping on the POI
icon.
•Create a trip with multiple destinations using the trip planner. Handy for business
people who need routing information to many destinations.
•View POIs that are ahead of you on the freeway. The exit POI function provides you with
a list of petrol stations, restaurants, hotels and auto repair shops located nearby exits you
are approaching while traveling on a freeway.
•Customize your Magellan RoadMate to meet your needs using the User Options menu.
•With the Magellan RoadMate 1425 you can view traffic information so as to avoid delays
in your travel.
The interface for the Magellan RoadMate is easy and simple to follow once you understand the
basics. You may never need to refer to this manual but if you do we have tried to present it in a form
that you can access the function you are trying to complete and follow the steps provided.
The Magellan RoadMate has a built-in battery so in most cases you will be able to follow these
instructions while reading them on your computer screen without plugging the Magellan RoadMate
to AC power. You should note that while indoors you may not get any satellite signals so your
location information would not be updated. However, the Centrality™ chipset installed in the
Magellan RoadMate will get satellite signals in some very rough locations so you may notice the
Magellan RoadMate computing a position, even indoors.
Differences between the Magellan RoadMate 1400, Magellan RoadMate 1415 and the Magellan
RoadMate 1425. All receivers store the maps on the SD card that has been preloaded at the
factory. The map on the Magellan RoadMate 1400 is only for the region purchased, whereas the
Magellan RoadMate 1415 and the 1425 have larger SD cards containing the available European
regions. With the Magellan RoadMate 1415 and 1425, you can access any of the available
European countries by using the Region function of User Options. The Magellan RoadMate 1400
has a Country Selection function, but only for those countries installed on the SD card.
Magellan RoadMate 1
The Magellan RoadMate 1415 and the Magellan RoadMate 1425 both include Voice Alerts (Text
A
B
C
D
E
to Speech) for maneuver instructions. (Available only in English, French, German, Spanish and
Italian.
The Magellan RoadMate 1425 additionally has integrated traffic capabilities as well access to
additional POIs provided by MarcoPolo.
This document is set up to be printed on A4 paper should you desire a printed version for your
reference.
DUSB connector. Power input from vehicle power adapter cable or AC power adapter
(+5 VDC / 2A).
ESD Card slot
Magellan RoadMate2
Installation Instructions
Installation of the Magellan RoadMate is simple and easy. The hardest part will be picking the best
location.
Selecting the Location
A few tips on selecting the proper location.
•Mount the Magellan RoadMate in a place where it can be easily seen and will not interfere
with your view of the road.
•The Magellan RoadMate should be mounted in such a way that the antenna, (located in
the top of the receiver), has an unobstructed view of the sky through the windshield.
•Make sure that the Magellan RoadMate nor any cabling will be disturbed in the event that
the airbags are deployed.
Cleaning the Area
Use the alcohol pad that came with the Magellan RoadMate to clean the area on the windshield that
has been selected for mounting the Magellan RoadMate. Let the area dry completely.
Attach the Cradle to the Swivel Mount
Line up the two tabs on the swivel mount
with the holes on the back of the cradle.
Push the cradle down until it locks in place
with the swivel mount.
Secure the Swivel Mount to the Windshield
Make sure that the lever at the base of the
adjustable mount is in the up position. Place
the base of the swivel mount firmly over the
area of the windshield to be used. Push the
lever at the base of the swivel mount all the
way down until it snaps in place. Carefully let
go of the assembly, making sure that it is
securely mounted.
Please note that the swivel mount supplied with the Magellan RoadMate may be different then the one shown in this
document.
Attaching the Magellan RoadMate to the Cradle
Installation3
Align the tabs on the cradle to the indents on the
bottom of the Magellan RoadMate. Swivel the
cradle up so that it is flush against the back of the
receiver and snap it into place.
Adjust the Mount for Optimum Viewing
Loosen the adjustment locking knobs and position the Magellan RoadMate for optimum viewing.
Once set, tighten the locking knobs. (Never attempt to adjust the mount while driving.)
Connecting Power
Plug the end of the vehicle power adapter into a
12 VDC vehicle power receptacle. Connect the
other end of the cable to the Magellan RoadMate’s
USB connector as shown. If there is power at the
receptacle, the Magellan RoadMate will power on.
(Note: some vehicles apply power to the vehicle
power receptacle only when the ignition is on.)
Magellan RoadMate 1425 Users: Attach the FM
antenna connector to the receiver just above the
power connector.
Check Connection and Final Adjustments
If the power indicator light on the vehicle power cable connector is on, power is being supplied to the
Magellan RoadMate. If it is not on, check the cable connection to the vehicle power receptacle. If
the light is still not on, turn the vehicle’s ignition on.
Press the power button (located at the bottom right side of the RoadMate) and hold down for a few
seconds. The Magellan RoadMate will power on. Sit in a normal driving position and make any final
adjustments to the swivel mount for optimum viewing. Tighten the adjusting knobs on the swivel
mount to hold the Magellan RoadMate firmly in place.
Press the power button again to turn the Magellan RoadMate off and turn the ignition switch to the
vehicle to off. The Magellan RoadMate is connected and ready for use.
Security
It is recommended that the Magellan RoadMate is not left in plain view while unattended for reasons
of theft.
Please note that the Magellan RoadMate is a receiver only and does not transmit GPS location
signals. The receiver nor the vehicle can be tracked using the Magellan RoadMate.
Installation4
Country Selection
Depending on the Magellan RoadMate you are using, the preloaded map may cover several countries.
When using the Magellan RoadMate, you must ensure that the correct country is first selected. You
can only search for addresses or POIs in the selected country. To select the country, follow the
directions below:
1From the Main Menu, tap on the right arrow to access the second page of the Main Menu.
2Tap on User Options.
3Tap on Destination Country.
4Select the desired destination country.
Installation5
Fundamentals
Powering on the Magellan RoadMate
The On/Off button is located on the bottom right side of the Magellan RoadMate as shown in the
Overview chapter.
Turning the Magellan RoadMate On
1.Press and hold the On/Off button for 1-2 seconds.
2.Read the Warnings and tap OK.
Turning the Magellan RoadMate Off
1.Press and hold the On/Off button for 1-2 seconds.
Selecting Auto-Power Shutdown Time
The Magellan RoadMate can be set up to shut down automatically using the time durations you can
select. The receiver will turn off after the selected duration has passed when; A) the position hasn’t
changed and B) the touchscreen hasn’t been pressed.
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Power.
6.Select Auto-Power Off time; Never, 10 Minutes, 20 Minutes or 30 Minutes.
7.Tap Save.
8.Tap the Back arrow to return to the Main Menu.
Volume
There are two ways to access the volume controls; one is tapping the speaker icon on the Map screen
and the other is through User Options.
Changing the Volume from the Map Screen.
1.Tap the speaker icon .
2.Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
3.Tap .
If you have the volume muted the speaker icon is displayed with a line through it indicating it is
muted. To unmute, tap the speaker icon again and the Magellan RoadMate will automatically
unmute. To make any other adjustments to the volume, press the speaker icon again.
Fundamentals6
Changing the Volume from User Options
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Volume.
6.Tap on the Mute button to mute the volume or tap inside the volume adjust bar below the
Mute button to change the volume levels.
7.Tap .
Brightness
Accessing the Brightness Control
1.Access the Main Menu.
2.Tap the Next arrow to access the Main Menu Page 2.
3.Tap User Options.
4.Tap System Settings.
5.Tap Brightness.
6.Tap inside the brightness adjust bar to set the desired brightness.
7.Tap .
On the Brightness screen there is a checkbox for “On-battery dimming (75%)” When checked, the
Magellan RoadMate will dim to 75% of the brightness when operating exclusively on battery power.
This prolongs the battery life between charges. It can be turned off by tapping on the checkbox.
The Main Menu
The Main Menu screen is the center for all the available functions for the Magellan RoadMate. The
Main Menu consists of two pages with large, easy to access icons.
Accessing the Main Menu
From the Map screen tap the Menu button.
From the other screens, tap the Back button.
Fundamentals7
.Main Menu - Page 1
Show Map: Displays the map with your current position (if computing a position from the GPS
signals) indicated by the blue triangle. See the Map Screen chapter for details.
Enter Address: Displays Enter Address menu. Addresses can be entered by first entering the town,
zip code, or by selecting a town from a list of cities you have already used as destinations. Also
provides access to your address book (my addresses). See the chapter on Routing to an Address for
details.
Points of Interest: Displays the Search Points of Interest menu. Search for POIs by entering the
name or by selecting from a list of available categories.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
Roadside Assistance: Displays the Auto-service and Maintenance screen.
Fundamentals8
.Main Menu - Page 2
Trip Planner: Opens the Trip Planner menu where you can create, edit, delete, rename or activate a
trip.
Exit POI’s: (Accessible only while on a freeway.) Provides a listing of restaurants, gas stations, or
hotels near approaching freeway exits. You can select one of the POIs presented and create a route to
it.
User Options: Accesses the User Options menu. This menu can be used to access functions used to
customize the Magellan RoadMate to your personal needs.
Home: If you have created a Home address, press the Home button for quick access for routing to
your home. If a Home address has not been created, a prompt is displayed to do so. See the Home
Button chapter for more information.
Roadside Assistance: Displays the Auto-service and Maintenance screen.
Fundamentals9
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.