Magellan Premium Car Kit Operating Instructions

Magellan® Premium Car Kit Instructions

Retaining Arm
Release Button

Audio Aux
Output

Power
Only (USB)

Speaker

Volume
Control

Retaining Arm

Multifunction
switch

Back Support
Adjustment
Block.

Back
Support
Adjuster

CAUTION: Always press
the release button
whenever adjusting the
retaining arm.

Power must be applied
for the built-in GPS,
Bluetooth and the
speaker to be active.

471 E. Camino Real, Santa Clara, CA 95050 USA

1

Assembly

Cradle holder

Retaining
Ring

Please do not place your iPhone® or iPod touch® into the Premium Car Kit until after the Premium Car
Kit has been assembled.

Assembly. Assemble the Premium Car Kit as shown. Do not tighten the retaining ring.

Press the unlock button and raise the retaining arm all the way to the top.

Insert your iPhone or iPod touch into the Premium Car Kit. Slide your iPhone or iPod touch

into the connector on the bottom of the Premium Car Kit and then gently push your iPhone or iPod
touch towards the Premium Car Kit.

Press the release button and push down on the retaining arm to lock your iPhone or iPod touch in
place.

Check for an uneven gap

The gap between the iPhone or iPod touch and

the Premium Car Kit should be even. If it is

uneven, you can slide the back support adjust

switch on the back to push out the adjustment

block until the gap at the top is the same as the

gap at the bottom. (Please note that if it is still

uneven, you will need to remove your iPhone or

iPod touch. Then pull out the adjustment block,

rotate it 180

Car Kit. This will increase the thickness of the

adjustment block.)

º and place it back in the Premium

2