Magellan MAPSEND 410, MAP 410, MAPSEND User Manual

No part of this publication or the computer programs described within may be reproduced, translated, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical photocopying, recording, or otherwise, without prior written permission from Magellan Corporation. Your rights with regard to this publication and the computer programs described within are subject to the restrictions and limitations imposed by the copyright laws of the United States of America (“U.S.A”) and/or the jurisdiction in which you are located.

For information on translations and distribution outside the U.S.A. please contact Magellan Corporation.

Trademark Notice

MapSend is a trademark of Magellan Corporation. All other product and

brand names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America. Part Number: 630750 A

Table of Contents

INTRODUCTION .................................................................................... 1

HE MAGELLAN MAPSEND CD ...................................................... 1

ARINE CD ............................................................................... 2

AND CD ................................................................................... 2

NLOCKING A C-MAP NT COMPACT REGION - QUICK REFERENCE.... 3

U G

ETTING STARTED............................................................................... 4

INIMUM PC REQUIREMENTS ......................................................... 4

NSTALLATION PROCEDURES ............................................................ 4

TARTING MAPSEND ...................................................................... 4

SING HELP .................................................................................. 5

APSEND MENU ........................................................................... 5

APSEND OPTIONS ........................................................................ 6

HE TOOLBAR .............................................................................. 10

HE STATUS WINDOW .................................................................. 10

AVIGATING THE MAP ...................................................................11

ELECTING (OPENING)/REMOVING A C-MAP REGION ...................... 12

REVIEW MODE ........................................................................... 12

OMPACT FULL FEATURES DEMO MODE ................................... 12

NT C

ELECTING (OPENING) A REGION ................................................... 12

ELECTING FROM THE MAP......................................................... 13

ELECTING FROM THE LIST ......................................................... 14

EMOVING A REGION.................................................................... 15

PLOADING REGIONS TO YOUR MAP 410......................................... 16

ONNECTING YOUR MAP 410 TO YOUR PC ................................. 16

TARTING UPLOAD ....................................................................... 16

NTERRUPT UPLOAD ...................................................................... 17

ND UPLOAD ............................................................................... 17

TYPES OF REGIONS ....................................................................... 18

NLOCKED REGIONS .................................................................. 18

OCKED REGIONS ...................................................................... 18

NFORMATION ON REGIONS ......................................................... 18

HART OBJECTS INFORMATION.................................................... 19

NLOCKING CODE ............................................................................. 20

NLOCKING CODE REQUEST ....................................................... 20

U I

NSERT AN UNLOCKING CODE ..................................................... 20

NLOCKING CODES BACKUP ...................................................... 21

ESTORE UNLOCKING CODES FROM BACKUP ............................... 21

RINT UNLOCKING CODE LIST .................................................... 21

OINTS OF INTEREST (POI)............................................................... 22

OINTS OF INTEREST ..................................................................... 22

OADS ........................................................................................ 23

ESSIONS ........................................................................................... 24

DDING A REGION TO SESSION ...................................................... 24

EMOVING REGIONS FROM SESSION ............................................... 25

REVIEW ..................................................................................... 25

ROUBLESHOOTING ........................................................................... 26

ONTACTING C-MAP & MAGELLAN ................................................ 27

C-MAP ...................................................................................... 27

AGELLAN .................................................................................. 28

INTRODUCTION

Congratulations on your purchase of MapSend™ allowing you to expand the use of your MAP 410. MapSend is a CD with an application program that contains C-MAP’s NT CompactTM Marine Electronic Charts (Marine CD) or enhanced road and Point of Interest detail (Land CD) which are uploaded to your MAP 410. This CD allows you to customize your receiver to fit all your boating and outdoor adventures. You will have the ability to download detailed C-MAP NT Compact nautical charts, superlakes and an additional 250,000 points of interest such as marinas, parks, campgrounds, tourist attractions and highway exit ramp services such as RV campgrounds, restaurants, ATM’s and gas stations and more.

With MapSend you can now expand the areas you are travelling by uploading nautical maps, superlakes and points of interest for a more comprehensive database. Making your way outdoors has never been so easy as it is with the additional information contained on this CD-ROM.

This guide will aid in the installation of MapSend as well as give you directions on how to use this program to increase your ability to navigate new areas of interest. The Getting Started section of this guide will have you navigating the MapSend database in no time at all and give you the opportunity to upload those areas of the map that you will need for your next journey outdoors.

THE MAGELLAN MAPSEND CD

MapSend’s CD-ROMs are a cartographic and information resource for you to use to aid you while navigating with your Magellan MAP 410 GPS receiver. Available in marine and land versions, these new databases of marine charts, land maps and Points of Interest (POI’s) can now be uploaded into your receiver to enhance the cartographic database contained within. Some items contained within the MapSend database need to be “unlocked” by calling the nearest C-MAP office listed in the back of this guide. Using the procedure contained in the section Unlocking A C-MAP NT Compact Region, you can unlock regions of interest easily and inexpensively without having to buy different cartridges for each region and with the preview feature (available for Marine Charts and SuperLakes) you’ll be able to preview a region to make sure it’s the right one for you (see “Preview” under “Selecting (Opening)/Removing A C-MAP Region” for further details).

Magellan MapSend™ User Guide 1

MARINE CD

The MapSend Marine CD features C-MAP NT Compact™ charts which contain coastlines and fixed and floating navigation aids (NAVAIDS), such as lighthouses, buoys and channel markers as well as spot soundings, depth contours and hazards to navigation. Superlakes, large, fresh-water lakes, are also available in the NT Compact™ format.

LAND CD

The MapSend Land CD provides enhanced road detail and over 250,000 POIs. Included are golf courses, campgrounds, parks, airports, hunting and fishing facilities, tourist attractions, highway exit ramp services as well as Superlakes.

2 Magellan MapSend™ User Guide

UNLOCKING A C-MAP NT COMP ACT REGION - QUICK REFERENCE

The following procedures apply for unlocking either marine NT Compact charts or SuperLakes. You can view the available marine

coverage, select your choice and contact a C-MAP Office for the “unlock” code.

Unlock Process for the First Unlock (Marine CD Only)

Step 1 Connect your MAP 410 to your PC. Step 2 Ensure the baud rate on the MAP 410 is set to 4800bps

(Use your MAP 410 User Guide to obtain the procedure for checking your receiver’s baud rate).

Step 3 Open the desired chart region. MapSend will give you

the code for this region in the Status Window.

Step 4 Enter the “Unit” menu and click on “Get MAP 410 ID”. Step 5 Note the serial number listed on the back of the CD. Step 6 Call the nearest C-MAP office and tell them you wish to

unlock a MapSend region. (See “Contacting C-MAP & Magellan” from this guide for available numbers). Alternatively, you may fax or e-mail your request to CMAP. You must provide them with the following information:

• MAP 410 Unit ID (Serial #)

• Chart Region #

• CD Serial # for your free, first unlock or credit card information for additional unlocks.

Step 7 C-MAP will give you the unlock code over the phone, by

fax, or email.

Step 8 Once you have the unlock code from C-MAP, double-

click on the chart region in the Status Window and a dialog box will open. Type in the 16-digit unlock code in the space provided and click “Unlock”.

Step 9 You will see the symbol in the Status Window change

from a “lock” to “unlock” icon signifying that you have successfully unlocked the region.

Step 10 Click the “Transfer” icon or press “F8”. The region will

then be uploaded into the MAP 410 unit. (Note: Don’t forget to also add Navaids for the region).

Magellan MapSend™ User Guide 3

C M Y CM MY CY CMY K

MapSend™

Chart Regions Unlock Instructions

1.) Chart Region Code:

For selecting a C-MAP region code, please refer to pages 12 - 15 of the user guide. Then write the code number down in the space provided above for reference.

2.) MAP 410 Unit ID #:

First connect your MAP 410 to your computer, then to obtain the MAP 410 unit ID number, enter the “Unit” menu and click on “Get MAP 410 ID” from the menu. Now write the ID number down in the space provided above for reference.

3.) CD-ROM Serial #:

Note that the CD-ROM serial number is listed on the back of the jewel case. Be sure to write it down in the space provided above for reference. You will not be able to purchase unlock codes with out it, nor will you be able to obtain your first (1) free marine chart region unlock code.

4.) C-MAP Office Phone #:

Please refer to page 27 of the user guide to locate the nearest C-MAP office. Then write the phone number down in the space provided above for reference. Be sure to call C-MAP in order to receive your first (1) free marine chart region unlock code and for any purchases of other unlock codes.

5.) Pricing:

The first (1) marine chart region unlock code is free with purchase of the MapSend™ Marine CD-ROM only. Additional unlock codes will be charged accordingly:

1 Marine Chart Region FREE MapSend™ Marine Marine Chart Regions $75.00 MapSend™ Marine Superlakes Chart Regions $50.00 MapSend™ Land (USA) &

MapSend™ Marine (Americas)

(For More detailed Instructions please refer to page 3 of the user guide.)

PN 203024 A

GETTING STARTED

MINIMUM PC REQUIREMENTS

Listed below is what is needed to upload MapSend™ onto your PC:

1. Microsoft® Windows® 95 or 98.

MapSend does not run under Windows NT.

2. 486, 66MHz or faster processor.

3. 16 MB RAM or more.

4. 15 MB hard disk space or higher.

5. Serial COMM port.

6. CD-ROM drive.

7. Mouse.

8. 256 color display.

9. Magellan PC interface cable (p/n: 00-19068-000) or PC interface cable with cigarette lighter adapter (p/n: 00-19067-000).

INSTALLATION PROCEDURES

Use the following procedures to install MapSend:

1. Start Windows®. Close all active programs.

2. Insert the MapSend CD into your CD-ROM drive.

3. Open the Start menu and click on Run.

4. Type D:\setup and click OK. If your CD-ROM drive is not D, type the appropriate letter in its place.

5. Follow the on-screen installation instructions.

STARTING MAPSEND

There are two ways to start the MapSend program:

1. Click on the Quick-Start shortcut icon located on your desktop. or

1. Click on the Start Button.

2. Select the Programs folder.

3. Select MapSend folder.

4 Magellan MapSend™ User Guide

4. Click the MapSend application to start and open the MapSend main window.

USING HELP

MapSend has a Help Menu that you can access by clicking on Help or by pressing (F1). Use the Help Index in the Help dialog box to get help on any of the topics listed. You can access any topic by clicking on it. If you want to return to the Index click on Back. You may print the topic by clicking on Print.

MAPSEND MENU

The MapSend menus contain MapSend functions and settings. Some of the functions can also be activated through the buttons on the Toolbar. The table below lists the menus and the items found within them.

MENU ITEM DESCRIPTION

File

Print Prints the map area as it appears in the active

window (screen).

Print Setup Opens the Print Setup dialog box for printing

options; paper size, paper source, orientation, etc.

Options Opens the Options dialog box to choose and set the

available options; Port&Source, Coverage Borders, Cities, Roads, POI.

Exit Closes MapSend.

Unit

Send Selected Programs/sends selected regions to regions your MAP 410 unit.

Restore factory This restores the program defaults that were data present at time of purchase.

Get MAP 410 ID Provides the MAP 410 Serial Number when the

receiver is connected to the PC.

Select Region

Add Opens the regions allowing you to choose an area

of interest to view. When the desired area is selected, it is automatically listed in the Status Window at the bottom of the MapSend main window.

Magellan MapSend™ User Guide 5

MENU ITEM DESCRIPTION

Remove Removes the selected region in the Status

Window at the bottom of the MapSend main window.

Unlock Codes Add/Remove: Adds or Removes an unlock code;

Make Backup; Restore from Backup.

Info Opens the NT Compact Info dialog box which lists

the selected region chart contents by scale (if

selected) or by name (if selected). View NT Opens a demo area which contains NT Compact Compact full data with full features. features demo

Session

Show session Brings up the Session dialog box and information. window

Help

Contents Opens the MapSend Help window. How to Use Help Windows About MapSend Opens the About MapSend dialog box containing

the version number and copyright information.

MAPSEND OPTIONS

To select the available options in MapSend, select “File/Options” from the menu bar as shown in the picture below:

6 Magellan MapSend™ User Guide

+ 24 hidden pages