Magellan MAP 330M User Manual

Product:

Map330

Product:

Map330,

Map330M

Product:

Map330,

Map330M

Product:

Map330,

Map330M

Product:

Map330,

Map330M

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

MAP 330 and MAP 330M

How many batteries are required for MAP 330?

MAP 330 uses two AA batteries that are installed from the back through the battery cover.

If I am using fresh batteries how long will my GPS stay on?

You have up to 10 hours of usage on two fresh AA batteries with the backlight turned off.

How much time do I have to replace the batteries before I loose waypoints?

Any waypoints or routes you have created are stored in permanent memory and should not be lost for months with the batteries removed. Present position and time data is not stored in permanent memory, but will be held in memory for at least two hours without batteries installed.

How do I connect the wrist strap to my GPS?

The wrist strap attaches to the ring on the screw for the battery door cover

Does the MAP 330 or MAP 330M come with a power or data cable?

No. You must purchase it separately.

Product:

Map330,

Map330M

Product: Map330,

Map330M

Product: Map330,

Map330M

Question:

Answer:

Question:

Answer:

Question:

How do I adjust contrast in MAP 330 and MAP 330M?

Press the menu button, then use the up/down arrows to highlight contrast and then use the left/right arrow to adjust the contrast.

How many navigation screens does MAP 330 and 330M have?

The Map 330 and 330M have seven navigation screens: Map screen, compass screen, large data screen, position screen, sat status screen, Speedometer screen and the road screen. The NAV button provides a means of accessing the navigation screens.

How do I save a Waypoint with a receiver-generated name?

Map330M

Product: Map330,

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

From any screen, press and hold the mark button for two seconds and the mark screen is displayed. The “save” button is highlighted and you can press enter to save the waypoint using the default name and icon.

How do I save a waypoint with a user-input name?

From any screen, press and hold the mark button for two seconds. Use the up/down arrows and notice that the highlight moves from field to field and then back to “save.” Highlight the Icon field using the up/down arrows. Press enter.

Is there a limit to the number of waypoints I can store in the MAP 330 and the MAP 330M?

Yes, the MAP 330 and 330M will store up to 500 user waypoints in memory.

Why is my GPSnot allowing me to create a message for waypoints?

With the MAP 330 you can only create messages or 200 waypoints. If you should ever get that many and need to input more, to make room you will have to delete ones that you no longer need.

How do I create a GOTO route?

The two ways to create a GOTO route are the following:

Creating GOTO using destination waypoint from “Near Position”

Press GOTO. Use the UP/DOWN arrows to highlight the category that your destination waypoint is in. Use the left/right arrows to select near position. Use the up/down arrows to highlight your choice of waypoint to be your destination and press enter. The GOTO route is now active and you are returned to the last viewed navigation screen.

Creating a destination waypoint from the database using “Alphabetical”

Press GOTO. Use the up/down arrows to highlight the category that your destination waypoint is in. Use the left/right arrows to select “Alphabetical”. Use the up/down arrows to highlight your choice of waypoint to be your destination and press enter. The GOTO route is now active and you are returned to the last viewed navigation screen

How do I turn on the display waypoint on map screen?

From map screen press the menu button highlight map setup and use the arrow to select the “display waypoints “and press enter. Use the arrow to select on and press enter and nav button.

How do I change map orientation from north up to course up?

From map screen press menu button highlight map setup and use the arrow to select the “orientation“ and press enter. Use thearrow to select on, press enter and nav button.

Map330M

Product: Map330,

Question:

How do I clear track in my GPS?

Map330M

Product: Map330,

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

Answer:

Question:

From map screen press the menu button, highlight clear track, and press enter. Click on confirm and press enter.

How do I reset the trip odometer?

Press the nav button to get the position screen and press the menu button and highlight reset trip and click on yes and press enter.

What information I can get from the satellite screen?

Thes The satellite status screen visually displays the satellites being used and the strength of the received signal. Additionally, this screen displays the power source you are connected to and, if internal batteries, how much battery life is remaining.

How do I access a waypoint in my GPS?

Press the menu button and highlight database and press enter. Use the up/down arrows to select category. Use the left/right arrow to select “find by” and press enter. You can find the waypoint by selecting waypoints from the nearest list and selecting waypoints from the Alphabetical list.

How do I save my present location?

From any screen press and hold the mark button for a few seconds. You can change the name and put the message in the GPS.

How do I manually create waypoint?

From any screen press and hold the mark button and highlight the location field and press enter. Edit line 1 of the location field and press enter. Also Edit line 2 of the location field and press enter. Edit elevation field and press enter. If you want to enter a message you can modify it. Highlight save button.

How do I delete a waypoint in my GPS?

From any menu button highlight database. Press enter and highlight user. Use the left/right arrow to select by “find by” and press enter. Select waypoint to delete and press menu. Highlight delete wpt ,press enter, confirm yes and enter.

Can I use MapSend Street and Destination in MAP 330M?

Answer:

Yes you can use Magellan MapSend Streets.

Product:

Map330,

Question:

How do I create a route in MAP 330 and in MAP 330M?

+ 6 hidden pages