Mackie MP-BTA Owner's manual

MP-BTA

MMCX Bluetooth Adapter

OWNER’S MANUAL

www.mackie.com

INTRODUCTION

For decades, our renowned loudspeaker designs have been helping artists perform their best on stage. MP Series Professional In-Ear Monitors build on that legacy with incredible sound and build quality.

With an array of driver configurations available, MP Series

In-Ear Monitors are perfect for live performance, mixing reference, and audiophiles alike. And thanks to their specially molded enclosures,

they sit gracefully in your ear with a comfortable, ergonomic fit and with up to 40 dB of sound isolation.

Elevate your performance and music with Mackie MP Series Professional In-Ear Monitors. And the MP-BTA Bluetooth Adapter pairs with any Bluetooth-enabled device, making on-the-go listening a breeze.

FEATURES

MP-BTA BLUETOOTH ADAPTER ACCESSORY

•Go wireless with your MP Series In-Ear Monitors

•Effortlessly pairs with any Bluetooth-enabled device

•Bluetooth 5 technology for excellent range and battery life

•Swiveling, detachable MMCX connectors

•In-line mic and control for answering calls and controlling music playback

•Simple to set up and use

•Available individually or bundled with MP Series In-Ear Monitors

IMPORTANT SAFETY INSTRUCTIONS

1.Read, follow, and keep these instructions. Heed all warnings.

2.Do not use in or near dangerous environments. This includes driving, cycling, walking, jogging and other areas where traffic is present

and accidents could occur.

3.Keep this product and its accessories out of reach of children. Handling

or use by children may pose a risk of death or serious injury. Contains small parts and cords that may pose a risk of choking or strangulation.

4.Set the volume level of the audio device to a minimum, and then, after connecting the earphones, adjust the volume gradually. Sudden exposure to loud noises could cause hearing damage.

5.Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

6.Do not immerse in water, such as while taking a shower, bath, or washing your face. Otherwise, sound deterioration or failures may result.

7.Do not use while sleeping as accidents may result.

8.If you are currently receiving ear treatment, consult your physician before using this device.

9.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes

or modifications to this device not expressly approved by LOUD Audio, LLC. could void the user’s

authority to operate the equipment under FCC rules.

10.This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:

(1)this device may not cause interference, and

(2)this device must accept any interference, including interference that may cause undesired operation of the device.

•CAN ICES-003(B)/NMB-003(B)

•The product can be sold in all EU countries

•Bluetooth transmitter power: ≤ 4 dBm

•Bluetooth transmitter frequency range: 2.402 – 2.480 GHz

•The max. operation temperature is 45 °C

•CAUTION: Risk of explosion if the battery is replaced by an incorrect type

Warning: Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion. Leaving a battery

in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas. A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

High sound pressure. Hearing damage risk. Do not listen at high volume levels for long periods.

11.Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss:

Duration,			Sound
per day in hours			Level
8			90 dB
6			92 dB
4			95 dB
3			97 dB
2			100 dB
1.5			102 dB
1			105 dB
0.5			110 dB
0.25 or less			115 dB

NOTE ON STATIC ELECTRICITY

Static electricity accumulated in the body may cause mild tingling in your ears. To minimize the effect, wear clothes made from natural materials.

Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service.

GETTING STARTED

1.Open the USB port on

the MMCX Bluetooth Adapter and connect the Micro B side of the included USB cable to the adapter and the USB-A side to a charging port. The center button illuminates solid red to indicate charging and becomes solid blue when fully charged.

2. Connect the in-ear monitors

to the Bluetooth adapter

by carefully snapping them

together.

3.Pair the device by pressing and holding the center button down on the adapter while simultaneously searching for MP-BTA on the device (phone, computer, etc.). The button will rapidly flash red and blue indicating that it’s in the process of pairing. Select MP-BTA on the device to pair them. A voice command confirms success!

4.Press and release the “+” and “-” buttons to raise and lower the volume. Press and hold the “+” and “-” buttons to skip to

the next and previous track.

5.Raise the volume on your device up to a comfortably loud listening level and enjoy!

Important Note:

Your ears are important to us! Be careful of permanent hearing damage. Lower the volume on your device. Even intermediate levels may be painfully loud. Always turn

the volume all the way down before connecting the in-ear monitors or doing anything new that may affect the headphone volume. Then turn it up slowly as you listen carefully.

Note: Voice prompts let you know when the MP-BTA is powered on/off, connected, amount

of time left on the charge and more!

Note: The Bluetooth may disconnect when affected by Electrostatic Discharge [ESD]. Manually reconnect the Bluetooth connection.

LIMITED WARRANTY Please keep your sales receipt in a safe place.

This Limited Product Warranty (“Product Warranty”) is provided by LOUD Audio, LLC. (“LOUD”) and is applicable to products purchased in the United States or Canada through a LOUD-authorized reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”).

For products purchased outside the U.S. or Canada, please visit www.mackie.com to find contact information for your local distributor, and information on any warranty coverage provided by the distributor in your local market.

LOUD warrants to Customer that the product will be free from defects in materials and workmanship under normal use during the Warranty Period. If the product fails to conform to the warranty then LOUD or its authorized service representative will at its option, either repair or replace any such nonconforming product, provided that Customer gives notice of the noncompliance within the Warranty Period to the Company at: www.mackie.com or by calling LOUD technical support at 1.800.898.3211 (toll-free in the U.S. and Canada) during normal business hours Pacific Time, excluding weekends or LOUD holidays. Please retain the original dated sales receipt as evidence of the date of purchase. You will need it to obtain any warranty service.

For full terms and conditions, as well as the specific duration of the Warranty for this product, please visit www.mackie.com.

The Product Warranty, together with your invoice or receipt, and the terms and conditions located at www.mackie.com constitutes the entire agreement, and supersedes any and all prior agreements between LOUD and Customer related to the subject matter hereof. No amendment, modification or waiver of any of the provisions of this Product Warranty will be valid unless set forth in a written instrument signed by the party to be bound thereby.

INTRODUCCIÓN

Durante décadas, nuestros famosos diseños de altavoces han ayudado a muchos músicos a dar lo mejor de si mismos sobre el escenario. Los monitores intraurales profesionales MP Series han sido diseñados basándonos en ese legado, con un sonido y calidad de fabricación increíbles.

Con una amplia gama de configuraciones de cabezal posibles, los monitores intraurales MP Series resultan perfectos por igual para las actuaciones en directo, sistemas

de referencia de mezclas y disfrute de los audiófilos. Y gracias a sus recintos especialmente moldeados, se adaptan de forma cómoda y perfecta en su oído con un ajuste ergonómico y cómodo y con hasta 40 dB de aislamiento sonoro.

El adaptador Bluetooth MP-BTA permite que la escucha sobre la marcha en cualquier entorno sea algo muy simple. Y el adaptador Bluetooth MP-BTA se sincroniza

con cualquier dispositivo que tenga Bluetooth activado, haciendo que la escucha “sobre la marcha” sea terriblemente simple.

CARACTERÍSTICAS

ADAPTADOR BLUETOOTH ACCESORIO MP-BTA

•Convierta sus monitores intraurales MP Series en inalámbricos

•Se sincroniza de forma rápida con cualquier dispositivo con capacidad Bluetooth

•Tecnología Bluetooth 5 para un mayor rango y duración de la batería

•Conectores MMCX extraíbles y con capacidad de giro

•Micro in-line y control que permite contestar llamadas y controlar la reproducción de la música

•Muy sencillos de configurar y usar

•Disponible de forma independiente o en un pack con los monitores intraurales MP Series