Mackie Mix10fxP Parts list

Appendix C: Technical Information Speciﬁ cations

Distortion (THD + N)

(1 kHz, A-Weighted ) Mic mono: <0.008% low gain Line mono: <0.008% low gain Line stereo: <0.008% at main out

Main mix output noise

(1 kHz,A-weighted ) Main mix level down, all channel levels down: –106 dBu Main mix level 0 dB, all channel levels down: –91 dBu Main mix level 0 dB, all channel levels 0 dB: –86 dBu

Frequency Response

(+0 dB/–3 dB) Mic mono input: < 10 Hz–55 kHz low gain Line mono inputs: < 10 Hz–55 kHz Line stereo inputs: < 10 Hz–55 kHz

Equivalent Input Noise (EIN)

Mic input (20 Hz – 20 kHz) 150 Ω termination: -114 dB A-Weighted

Gain

Mic mono input: 45 dB high gain 25 dB low gain Line mono inputs: 20 dB high gain 0 dB low gain Line stereo inputs: 0 dB

Maximum Levels

Mic mono input: –25 dBu high gain

-4 dBu low gain Line mono inputs: +21 dBu low gain +1 dBu high gain Line stereo inputs: +21 dBu Preamp main and monitor outputs: +21 dBu

Impedances

Mic mono input: 2.5 kΩ balanced Line mono input: 20 kΩ balanced Main and monitor preamp outputs: 150 Ω Unbalanced

Connections

Mic input: XLR balanced Line mono input: 1/4” TRS balanced Line stereo input: 1/4” TRS unbalanced Preamp main outputs: 1/4” TRS balanced Monitor outputs: 1/4” TRS balanced Loudspeaker outputs: 1/4” TS and Neutrik Speakon

Loudspeaker outputs

(Both channels loaded and driven at 1 kHz.) Peak output power @ 4 Ω: 2 x 500 W peak Average output power @ 4 Ω: Average output power @ 8 Ω: Recommended load impedance: 4 – 8 Ω per side

2 x 350 W rms, 1% THD 2 x 200 W rms, 1% THD

Internal Effects

Type: Internal processor mono in, stereo out Effects presets: 16 TAPCO-designed presets

Power Consumption

100–120 VAC, 50/60 Hz: 1010 watts 220-240 VAC, 50/60 Hz: 1010 watts

Dimensions

Height: 11.67 in/296.4 mm Width: 18.44 in/ 468.4 mm Depth: 11.3 in/287 mm

Weight

Net weight: 22 lb/10 kg

Disclaimer

Since we are always striving boldly to make our products better by incorporating new and improved materials, components, and manufacturing methods, we reserve the right to change these speciﬁ cations at any time without notice.

Please check our website in case there are any corrections and updates to this manual: www. tapcoworld.com.

Channel EQ

High Shelving: +/- 15 dB @ 12 kHz Mid Peaking: +/- 15 dB @ 2.5 kHz Low Shelving: +/- 15 dB @ 80 Hz

7-Band Graphic EQ

Main and Monitor 1: ±12 dB @ 125, 250, 500, 1 k, 2 k, 4 k, and 8 kHz

Dedication

The following trainee technical writers from Mr. Kelly’s class of 2007/2008, were involved in the production of this manual: Autumn, Barrie, Brendan, Caswell, Cormack, Emily, Eliza, Erin, Ethan, Isabella, Jilly, Jordan, Lily, Max, Mia, Read, Silas, Sol, Spencer, and Steven. Now they are moving up to 1st grade!

Dimensions

11.67 in/ 296.4 mm

WEIGHT

22 lb 10 kg

18.44 in/ 468.4 mm

11.30 in/ 287 mm

Correct Disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city ofﬁ ce, waste authority, or your household waste disposal service.