Mackie M48 Owner's manual

OWNER’S MANUAL

POWER LOW

BATT.

POWER

OUTPUTINPUT+9V DC

Important Safety Instructions

.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

Only use attachments/accessories speciﬁed by the

M48 48V Power Supply

manufacturer.

10.

Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11.

This apparatus shall not be exposed to dripping or splashing, and

no object ﬁlled with liquids, such as vases or beer glasses, shall be placed on the apparatus.

12.

This device complies with Part 5 of the FCC Rules. Operation is

subject to the following two conditions: () this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV technician for help.

CAUTION:

Changes or modiﬁcations to this device not expressly approved by LOUD Audio LLC could void the user's authority to operate the equipment under FCC rules.

WARNING — To reduce the risk of ﬁre or electric shock, do not expose this apparatus to rain or moisture.

3.

This device complies with FCC radiation exposure limits set

forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

4.

This apparatus does not exceed the Class A/Class B

(whichever is applicable) limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION

— Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant las limites applicables aux appareils numériques de class A/de class B (selon le cas) prescrites dans le réglement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.

5.

This device complies with Industry Canada licence-exempt RSS

standard(s). Operation is subject to the following two conditions:

() this device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:

() l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

6.

Exposure to extremely high noise levels may cause permanent

hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to suciently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has speciﬁed the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these

permissible limits could result in some hearing loss. To ensure against potentially dangerous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pressure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here:

Duration, per day in hours

8 90 Duo in small club 6 92

4 95 Subway Train 3 97

2 100 Very loud classical music

1.5 102 1 105 Ryan screaming at Troy about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

Sound Level dBA, Slow Response

Typical Example

Correct disposal of this product: This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE directive (2012/19/EU) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the eective usage of natural resources. For more information about where you can drop o your waste equipment for recycling, please contact your local city oce, waste authority, or your household waste disposal service.

M48 48V Power Supply

Contents

Owner’s Manual

Introduction

Important Safety Instructions ........................................ 2

Contents ........................................................................... 3

Features ............................................................................3

How To Use This Manual ................................................. 3

Introduction ..................................................................... 3

Getting Started ................................................................ 3

Things To Remember ....................................................... 3

Hookup Diagram .............................................................. 4

M48: Rear Panel Features ..............................................5

Phantom Power – IMPORTANT ............................... 5

1. Power Connector ...................................................5

2. XLR Input Jack ..................................................... 5

3. XLR Output Jack ..................................................5

M48: Front Panel Features ............................................. 6

4. Power Switch and LED .........................................6

5. Low Battery LED ...................................................6

Battery Compartment (Not Shown) .......................6

Appendix A: Service Information ....................................7

Appendix B: Technical Information ................................ 8

M48 Dimensions.......................................................8

M48 Block Diagram ..................................................9

Limited Warranty ........................................................... 10

The M48 48v Phantom Power Supply allows you to use your devices and microphones that require external power in any setup.

Sometimes the phantom power being supplied is inadequate as well, and with the M48, you will always get a clean, full 48v of power for the best sound and noise performance. Powered by either a 9v battery or supplied AC adapter.

Getting Started

The following steps will help you set up the M48 48V Power Supply quickly.

1. Make sure the power switch is o on all connected gear.

2. Turn down all level knobs on all connected gear.

3. Connect a condenser microphone to the input jack

of the M48 using a balanced XLR cable.

4. Connect a balanced XLR cable from the output jack

of the M48 to the input jack of the mixer or audio interface.

5A. Push the included AC power adapter securely into the M48’s connector and plug the other end into an AC outlet. The M48 may accept the appropriate voltage as indicated near the connector.

Features

• Perfect for condenser mics and equipment that require

48v Phantom Power

• XLR input and output

• Transparent, noise-free operation

• Powered by the included AC adapter or 9v battery

• Power and Low Battery indication

• Built-Like-A-Tank™ construction

How to Use This Manual

Afer this introduction, a getting started guide will help you get things set up fast. The hookup diagram shows a typical setup.

This icon marks information that is critically important or unique to the M48. For your own good, read and remember them.

Like us Follow us Watch our dang videos

...OR...

5B. Insert a 9 V battery (accessible by sliding and removing

the battery case cover on the bottom panel of the M48).

6. Turn the mixer or audio interface’s power switch on.

7. Turn the M48 48V Power Supply’s power switch on.

The front panel power LED will illuminate.

8. Be sure that the volume of the input is the same as it

would be during normal use.

9. Slowly raise the mixer’s input and output level knobs

to a comfortable listening level.

Things to Remember

• Never listen to loud music for prolonged periods. Please see the Safety Instructions on page 2 for information on hearing protection.

• Save the shipping boxes and packing materials! You may need them someday. Besides, your hamster will love playing in them and jumping out at you unexpectedly. Remember to pretend like you are surprised!

Part No. SW1229 Rev. A 01/18

• Save your sales receipt in a safe place.

Owner’s Manual

Hookup Diagram

M48 48V Power Supply

1(L)3/45/62-TRACKSTUDIO/

2(R)

+9V DC

USB

POWER

OUTPUTINPUT

MONITORC MONITORBMONITOR

REC SRC

SELECT

2-TRACK INPUTS 1/2

+18VDC

1.5A

BAL / UNBAL

BAL / UNBAL BAL / UNBALBAL / UNBAL

BAL / UNBAL

OUTPUTS

PHONES

+4dB

AMP

-10dB

BAL / UNBALBAL / UNBAL

MIC

FOOTSWITCH

TALKBACK

AUX MIX

+4dB

(MONO)

BAL / UNBAL

CUE IN

-10dB

(MONO)

SOURCES INPUTS

(MONO)

INT EXT

The M48 48V Power Supply is the perfect solution for anyone using a condenser microphone (or other

equipment) that requires phantom power. Let’s take a look at the hookup diagram.

Start by turning the down the main output level of the audio interface. In this example it’s a Mackie Big Knob

Studio+. Next, connect a condenser microphone to the M48’s input jack using a balanced XLR cable. Now, you will want to connect a balanced XLR cable from the M48’s output jack to the audio interface’s input jack. Finish up by slowly raising the level of the audio interface’s output knob.

Note: While an audio interface may be the most common use, you could connect a mixer in lieu of an audio

interface to the M48.

Note: If the audio interface or mixer has built-in phantom power, do not engage it while using the M48!

Typical M48 Setup

M48 48V Power Supply

+ 7 hidden pages