L.R.Baggs ANTHEM User Guide

ANTHEM
T R U•M I C T E C H N O L O G Y
User’s Guide
U.S. Patent Pending
TM
A
B
C
D
E
A. MIX CONTROL (Mixes between mic and pickup)
Mic is carrying the majority of the guitar’s voice with the Element pickup supporting only the lowest frequencies.
When rolled toward the bridge, you will hear the full­range Element pickup only.
Feel free to experiment with dierent positions as there is a wide range of great sounding and useful settings.
B. PHASE INVERSION
Press this button to invert the phase. Usually one phase will sound best and/or provide the best feedback resistance.
We recommend trying both phases each time you set up.
C. VOLUME CONTROL
Roll this wheel toward the neck to increase the volume or toward the bridge to decrease the volume.
D. BATTERY CHECK
Press this button to check battery life.
A full battery will light up all 5 LED’s and should give you approximately 170 hours of playing time. When only two lights are lit, you have about 8 hours of normal playing time left. If only one light is lit, replace the battery.
The battery is typically mounted on the neck block or the upper bout.
To maximize battery life, make sure to unplug your instrument cable when not using the Anthem. The battery check will work even when there is no cable plugged in.
E. MIC LEVEL CONTROL (Adjusts the level of the Tru •
Mic relative to the level of the Element)
IMPORTANT: Setting this control correctly is vital to the sound of the Anthem system.
First, you must roll the mix control completely toward the neck. Play through a P.A. or acoustic amplier while you are making adjustments. A small at-head jeweler’s screwdriver will be needed.
Your amplied tone should be well balanced and true to the acoustic sound and feel of the guitar. If it lacks clarity and top-end, increase the mic’s level by turning the control clockwise. Back it o slightly If you experience excessive handling noise and/or brightness.
REGISTER THIS PR ODUC T
online at www.lrbaggs.com
Loading...