Louroe Electronics TLSP-PB-WF, TLSP-PB-WS Specsheet

TLSP-PB-WF / TLSP-PB-WS

®

6955 VALJEAN AVE, VAN NUYS, CA 91406

PH: [phone] / FAX: [phone]

DESCRIPTION

Models TLSP-PB-WF and TLSP-PB-WS are call
stations designed to activate a Louroe sound
activated Base Station and to provide bi-directional
communications. Both the microphone and speaker
are mounted in a special design tone path for
protection from vandalism. The tone path is mounted
to the back of an 11 gauge stainless steel face plate.
A vandal resistant flush mount call button is used for
activating the Louroe sound activated Base Station
(DG series). The call station may be mounted up to
1000’ from the Base Station. A 6”H x 6”W x 4”D
backbox is included.

+

Model TLSP-PB-WF is for flush mounting

+

Model TLSP-PB-WS is for surface mounting

NOTE: Models TLSP-PB-WF and TLSP-PB-WS are
compatible only with Louroe ModelS DG-12II, and
DG-25III alarming audio Base Stations.

/ [e-mail]

REMOTE CALL STATION

TECHNICAL DATA SHEET

MODEL TLSP-PB-WF

(Flush Mount)

MODEL TLSP-PB-WS

(Surface Mount)

APPLICATION

Correctional Facilities
Public Access Areas

....Or any area where vandalism is a concern

WIRING REQUIREMENTS

4 Conductor consisting of:

+

2 Conductor shielded, 20 gauge
with 22 gauge drain (microphone
connection)

+

2 Conductor unshielded, 18 gauge

(speaker connection)

IMPORTANT NOTICE

When this equipment is used as part of an
audio monitoring system, the law requires
that the public be given notice of AUDIO
MONITORING ON THE PREMISES. A
deca l noti ce is included with each
microphone shipped.

Federal Law References:
Federal Regulations, US Code, Title 18.
Crime and Criminal Procedure, Sec 2510.

Parking Structures
Transportation Terminals

All in the same jacket

AUDIO

MONITORING

On

These Premises

®

A

M

FEATURES

+

Damage resistant 11 gauge stainless steel
faceplate

+

3”(7.6cm) Speaker and microphone, internally
mounted to a tone path for total protection

+

Special tamper-proof mounting hardware included

+

Vandal resistant pushbutton

+

May be mounted up to 1,000’ (305m) from Louroe
Base Station

+

6” x 6” x 4”(15cm x 15cm x 10cm) backbox
included

SPECIFICATIONS (Model TLSP-PB-WF and TLSP-PB-WS)

Output of microphone (Mic)

Frequency Response (Mic)
Current Drain (mic)

Speaker

Faceplate (TLSP-PB-WS)

Faceplate (TLSP-PB-WF)

Backbox

Weight

Shipping Weight

R

U

E

T

D

C

A

F

U

N

I

N

T

H

E

Line Level (0 dB, 600W @ 1KW)
40 Hz to 15 kHz
10 mA
3”, 2W w/ 70V transformer

6”L x 6”W

7”L x 7”W

Vandal Resistant
Stainless Steel

6”H x 6”W x 4”D

4 lbs

7 lbs

tlsp_pb_specs_3/15