Louroe Electronics AP-4, AP-2, AP-8 Specsheet

AUDIO BASE STATIONS

®

AP-2 / AP-4 / AP-8

TECHNICAL DATA SHEET

DESCRIPTION

Models AP-2, AP-4 and AP-8 are non-alarming audio monitoring base
stations for providing 2, 4 and 8 audio zones. Each model has the
same amount of audio outputs (RCA) as it does for microphone inputs.
Example: Model AP-4 will accommodate four Louroe Microphones and
has four line level audio outputs. All models contain a built-in speaker
for producing live audio and audio playback from a DVR. In addition,
each model contains a selectable RCA audio output for interfacing with
a DVR with only one audio input, or with a VCR. Zone selection is by
pushbutton. All Louroe microphones are compatible with the AP-2,
AP-4 and AP-8.

APPLICATION

When part of a Louroe Audio System, the AP-2, AP-4, and AP-8 Base
Stations can be used in situations such as:

Sleep Disorder Centers
Therapy Labs
Fast Food Restaurants

Convenience Stores
Interrogation Rooms
Day Care Centers
Anywhere CCTV Camras Are
Installed

AP-4 AP-8

FEATURES

Built-in amplifier and 3" speaker for
monitoring live audio and playback

Audio output (each zone) for
connection to a DVR with multiple
audio inpurts

Volume control

Headphone jack for private
monitoring

AP-2

Desktop model

19" Rack Mount Kit available
Request RM-1935 kit

AP-2, Ap-4 and AP-8 are listed

WIRING REQUIREMENTS

2 Conductor shielded cable, 22 gauge with a 24 gauge drain wire.
NOTE: Unshielded cable is not satisfactory for audio systems

IMPORTANT NOTICE

When this equipment is used as part of an audio
monitoring system, the law requires that the
public be given notice of AUDIO MONITORING
ON THE PREMISES. A decal notice is included
with each microphone shipped.

FEDERAL LAW REFERENCES:

Federal Regulations, US Code, Title 18. Crime

and Criminal Procedure, Sec 2510.

MANUFACTURED

IN THE

AUDIO

MONITORING

On

These Premises

®

SPECIFICATIONS

Input sensitivity (from remote mic)
Monitoring power output
Audio line output impedance
Audio input impedance
Freg. response
Headphone impedance
Power input
Dimensions
Weight

0.78 Vrms

1.5W @8Ω
600W or higher

10kΩ

100Hz to 10kHz

8 to 600Ω

12 Vdc, 500mA

8 ½"W x 9 ½"L x 2 ⅛”H

3.5 lbs (1.6 kg)

WARRANTY

LOUROE ELECTRONICS® warrants that at the time of shipment products manufactured
by LOUROE ELECTRONICS to be free of defects in material and workmanship. Should a
defect appear within one year (12 months) from date of shipment, LOUROE
ELECTRONICS will, at its sole discretion, repair or replace the defective equipment. This
equipment shall not be accepted for repair or return without prior notification by LOUROE
ELECTRONICS .

This warranty does not extend to any Louroe product that has been subjected to improper
or incorrect installation, misuse, accident, or in violation of installation instructions provided
by LOUROE ELECTRONICS.

Returned shipments to LOUROE ELECTRONICS shall be at customer’s expense.
LOUROE ELECTRONICS will return the equipment prepaid via best way.

LOUROE ELECTRONICS 6955 VALJEAN AVENUE | VAN NUYS, CA 91406 | TEL [phone] FAX [phone]

®

www.louroe.com | e-mail: [e-mail] / [e-mail]

audiobasestation/oneway/ap8_louroe