Lorus R2302HX9, R2307EX9, R2311LX9, R2321LX9, R2327CX9 Instruction manual

NREZ009	5-2015

CAL. Z009 (R23 SERIES)

■ CHARACTERISTICS

1.Time/calendar display: Hour, minute, second, month, date and day of the week

2.Time indication: 12-hour display format with PM indicator and 24-hour display format are available.

3.Stopwatch: The stopwatch can measure up to 23 hours 59 minutes and 59 seconds in 1/100-second increments. Split time measurement is available.

4.Alarm: The alarm can be set to sound at the designated time on a 24-hour basis.

5.Chime: The chime can be set to sound every hour on the hour with a single beep.

6.Countdown timer: The countdown timer can be set up to 23 hours 59 minutes and 59 seconds.

7.Illuminating light: The built-in electroluminescent (EL) light evenly illuminates the display for easy viewing in darkness.

■ BUTTONS AND DISPLAYS

Day of the week
A (LIGHT)	B (STAR T/STOP)
Hour	Date
PM
indicator	Minute
	Chime
Second	signal
	Timer
	signal
D (MODE)	C (SET)
Stopwatch	Alarm signal
signal

The display mode changes in the following order by pressing Button D.

TIME/CALENDAR STOPWATCH

D

D

ALARM

D

		D
SECOND TIME ZONE	TIMER

D

■ HOW TO SET THE TIME/CALENDAR

1.Press Button C to change the display to the time/calendar setting mode. (The second digits start flashing.)

2.Selection of the digits to be adjusted (flashing) is made in the following order by pressing Button D.

				D				D
	SECONDS					HOURS				MINUTES
		D									D
	12/24-HOUR									MONTH
	FORMAT										D
	D			DAY OF THE
								D		DATE
					WEEK

3.One digit (flashing) is advanced with each press of Button B. (The digits except seconds are advanced quickly by keeping Button C pressed.)

•Second setting

Press Button B in accordance with a time signal. The second digits are reset to “00” and start counting immediately.

When the second digits count any number from “30” to “59” and Button B is pressed, one minute is added and the seconds are immediately reset to “00.”

B

	C
TIME/CALENDAR mode	SECOND SETTING
C	D

B

B

12/24 FORMAT SETTING	HOUR SETTING
D	D
B	B

DAY OF THE WEEK		MINUTE SETTING
SETTING
	D		D

B B

D

DATE SETTING

MONTH SETTING

4.After all the adjustments are completed, press Button C to return to the TIME/CALENDAR mode.

Choice of 12-Hour/24-Hour format

•The time display format in either 12-hour indication or in 24-hour indication can be selected alternately by pressing button B. Under the 12-hour indication format, “PM” mark appears in the afternoon, but no AM mark appears in the morning. Under the 24hour indication format, no mark appears on the display.

■ HOW TO USE THE STOPWATCH

Press Button D to go to the STOPWATCH mode. The STOPWATCH mode indicator appears on the display.

		STOPWATCH mode
	B	indicator
		STOPWATCH
D	C	signal

STOPWATCH OPERATION

Standard Measurement

B B C

Start Stop Reset

Split Time Measurement

B	C	C	B	D
Start	Split	Split	Stop	Reset
		Release

*Measurement and release of split time can be repeated by pressing button C.

During the measurement, the STOPWATCH signal keeps flashing.

Press Button D to return to the TIME/CALENDAR mode.

■ HOW TO SET ALARM TIME

Press Button D two times to go to the ALARM mode. The ALARM mode indicator appears on the display.

1.Press Button C to change the display to the alarm setting mode. The hour digits start flashing.

2.Press Button B to set the hour digits. One digit (flashing) is increased with each press of Button B. The digits are advanced quickly by keeping Button B pressed.

3.Press Button D to confirm the hour setting and move on to the minute setting. The minute digits start flashing.

4.Press Button B to set the minute digits. One digit (flashing) is increased with each press of Button B. The digits are advanced quickly by keeping Button B pressed.

5.Press Button D to confirm the minute setting and move on to the time zone setting.

6.Press Button B to select the time zone.

7.Press Button C to complete the alarm setting.

Press Button D to return to the TIME/CALENDAR mode.

NREZ009.indd				1
					15/05/07 16:2