Logicom M Bot 60 Getting Started Manual

QUICK START GUIDE

Logicom M bot 60 Smartphone 4G-

LTE/GPS/WIFI/BT

Trademarks

Android, Google, Google Play and other marks are trademarks of Google Inc.
Adobe Flash Player Copyright(C) 1996-2011 Adobe Systems Incorporated. All rights reserved. Adobe and
Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR
(ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,
L.L.C. SEE HTTP://MPEGLA.COM
Facebook, the Facebook logo, and the F logo are trademarks or registered trademarks of Facebook, Inc.
Foursquare is the registered trademark of Foursquare Labs, Inc.
This software is partially based on the work of the Independent JPEG Group.
The MPEG Layer-3 audio encoding technology and patents are licensed by Fraunhofer IIS and Thomson.
THIS PRODUCT IS LICENSED UNDER THE MPEG4 PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE MPEG4 STANDARD (“MPEG4 VIDEO”) AND/OR
(ii) DECODE MPEG4 VIDEOS THAT WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO
PROVIDER LICENSED TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE
IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA,
L.L.C. SEE HTTP://MPEGLA.COM
SD, SDHC, microSD and the microSDHC logos are trademarks of SD-3C, LLC.
The Twitter name, logo, Twitter T, Tweet, and Twitter bird are trademarks of Twitter, Inc. in the United
States and other countries.
THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (“VC-1 VIDEO”) AND/OR
(ii) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO
PROVIDE VC-1 VIDEO.
NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
SEE HTTP://WWW.MPEGLA.COM
Wi-Fi, the Wi-Fi CERTIFIED logo, WPA, WPA2 and Wi-Fi Protected Setup are trademarks or registered
trademarks of Wi-Fi Alliance.
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
All other names of systems, products and services are trademarks or registered trademarks of their
respective owners. The symbols ((TM)) or (R) are not used in this guide.

Got everything?

 1 x Smartphone
 1 x Charger adaptation sector – USB universal – (Model: D7-0751000 / 5V / 1A - Made by

Shenzhen Diasinger Digital Co.,Ltd (4/F, Plant 1, Yusheng Industrial Park, Jiuwei Community,
Xixiang St., Baoan Dist., Shenzhen, Guangdong, China (Mainland)

 1 x USB cable
 1 x Quick start guide
 1 x Pedestrian kit

NOTE: The packaging materials, such as the adhesive tape, plastic film, string and labels, are not
part of this product.

WARNING: For your safety, please do not remove the screen's protective film,

located under the antistatic film (with tab). It protects your screen against slight
scratches and provides optimum protection if the phone is dropped.

Logicom accepts no responsibility for personal injury sustained following removal of the protective film
by the consumer. Note that this protective film does not increase the robustness of the product. For
replacement of the protective film, please consult a specialist Smartphone dealer.

Installation guide

1. Description of the Smartphone.

1 – Front camera
2 – Rear camera & flash
3 – Volume
4 – ON/OFF button
5 – Jack
6 – Micro USB port
7 – Speakers

2. Inserting a SIM card

Your Smartphone is a mobile phone with dual SIM
card, which enables you to use two lines on the
same Smartphone. Your smartphone has two SIM
slots (SIM 1 and SIM 2).

To insert the SIM card(s):

 Switch off the phone and remove the rear

cover and battery.

 Insert the SIM card correctly into the

relevant card slots. Observe the direction of
insertion of cards, the contacts to the outside.

 SIM 1 uses a Micro-SIM card and SIM 2

uses a Micro-SIM card.

CAUTION : The 3G/4G function can only be used on one SIM card.

 Then replace the SIM compartment in place.

3. Inserting a MicroSD

It is possible to increase the internal memory of the Smartphone device with a MicroSD card. (Maximum

32GB MicroSD card).

 Switch off the phone and remove the rear cover and battery.
 Insert the memory card into the relevant slot.
 Then replace the battery and cover.

4. Charging the battery

Installing the battery:

 Remove the rear cover of your Smartphone.
 Insert the battery ensuring that the image shown here is facing you.
 Replace the rear cover of the Smartphone.

CAUTION: Risk of explosion if battery is replaced by an incorrect type.

Model: 376694AR (Li-ion – 3,7V – 3000mAh)
To replace the battery, please enquire with the after-sales service of your
dealer.
Dispose of used batteries according to the instructions.
To replace the battery, please enquire with the after-sales service of your dealer.
Dispose of used batteries according to the instructions.

Charging the battery:

 To charge the battery, connect the USB cable (supplied) to the USB port of your Smartphone

and the other end to the mains adaptor (supplied). Then connect the mains adaptor to a power outlet.

 The battery charge icon illuminates during charging and indicates the charge status.
 When the battery is fully charged, you can disconnect the USB cable from the device then

from the power outlet.

IMPORTANT:

 The Smartphone is only recharged via its USB port.
 Ensure your Smartphone is fully discharged before charging it for the first time.
 The battery must be charged for at least 5 to 8 hours when first charged.
 After a long period without use, It should be necessary to do many cycles of charging /

discharging to obtain maximum power capacity

Note: You can use the device when it is being charged. In this case, the battery may take longer to
charge fully.

Safety information for charging the battery:

 To recharge the battery, only use the mains adaptor supplied with your device. Do not use any

other power supply or electrical device.

 The power outlet to which the device is connected must be near the equipment and must

always be easily accessible.

 Always wait at least 5 seconds after switching off the device before restarting it. Switching the

device off and then back on again immediately may damage the electrical circuits.

 Do not disassemble, open or shred the battery contents. Do not dispose of batteries in fire or

water. Do not charge the battery if the room temperature exceeds 45° C. Keep the battery in a clean
and dry place. Avoid leaving the battery under sunlight.

 Do not short circuit the battery. Do not keep the battery in a place where it can be shorted by

other metal objects.