Loewe Connect ID 46 DR+, Connect ID 40 DR+, Connect ID 55 DR+ User Manual

Download

Connect ID

Connect ID 55 DR+ Connect ID 46 DR+ Connect ID 40 DR+

User guide

35908020

Connect ID 40-55 DR+ User guide

Imprint

Loewe Technologies GmbH Industriestraße 11 D-96317 Kronach www.loewe.tv

Printed in Germany Editorial date 11/16-2.0 TB © Loewe Technologies GmbH, Kronach ID: 2.3.24.0

All rights including translation, technical modifications and errors reserved.

Imprint

Connect ID 40-55 DR+ User guide



Table of contents

Imprint ...........................................................................................2

Welcome ........................................................................................5

Scope of delivery .......................................................................................... 5

About this user guide ................................................................................... 5

For your safety ..............................................................................6

Basic Functions ............................................................................8

Remote control .............................................................................9

Operating controls on the TV set ............................................. 10

Connections rear side of the device .........................................11

Preparing the TV set .................................................................. 12

Installing the TV set .....................................................................................12

Set covers .....................................................................................................12

Connecting the TV set ................................................................................12

Bundling the cables .....................................................................................14

Preparing the remote control unit .............................................................14

Switching the TV set ON/OFF ...................................................................15

Technical information .................................................................................15

General information on menu operation ................................. 16

Info display ....................................................................................................19

Operation without remote control.............................................................19

Initial installation ...................................................................... 20

Initial installation wizard .............................................................................20

TV set as a monitor .....................................................................................31

Home view ...................................................................................32

Home - Favourites ......................................................................................33

TV ................................................................................................ 34

Setting the volume .....................................................................................34

Select station ..............................................................................................34

Status display ..............................................................................................36

Function list .................................................................................................37

AV list ............................................................................................................ 37

Electronic Programme Guide – EPG........................................................38

Teletext ..........................................................................................................41

HbbTV / MediaText .................................................................................... 43

Picture in Picture (PIP) ............................................................................... 44

Digital Recorder .......................................................................................... 45

Digital-Recorder – Overview of functions ............................................ 45

TV viewing with time shift .......................................................................46

Archive recording ..................................................................................... 47

DR+ archive .............................................................................................. 49

DR+ Streaming ........................................................................................53

Follow me function ..................................................................................53

Media

+ ........................................................................................ 54

General information on media reproduction ..........................................54

Accessing your media ................................................................................ 54

Video ............................................................................................55

Video playback ............................................................................................56

Audio/Radio .............................................................................. 63

Audio playback ...........................................................................................64

Radio mode (DVB radio) ........................................................................... 67

Radio mode (Internet radio) ..................................................................... 68

Photo .......................................................................................... 69

Photo display ...............................................................................................70

Web .............................................................................................. 71

MediaNet ......................................................................................................71

Browser ........................................................................................................ 73

Extras...........................................................................................74

Timer ............................................................................................................ 74

Conditional Access module (CA module) ............................................... 79

DVB Common Interface Standard (CI) ...................................................80

DR+ Streaming ...........................................................................................80

Special functions .........................................................................................81

Integrated features ......................................................................................81

Picture ..........................................................................................................83

Sound ........................................................................................................... 87

Stations ........................................................................................................88

Automatic scan TV+Radio .....................................................................89

Manual Scan TV / Radio .........................................................................90

Station lists TV / Radio ...........................................................................92

Compose / edit Personal list .................................................................. 93

Update station list automatically ...........................................................94

Control .........................................................................................................95

Language ..................................................................................................96

EPG ............................................................................................................96

Parental lock ............................................................................................. 97

Energy efficiency ...................................................................................... 98

Quick start mode ..................................................................................... 98

Software update.......................................................................................99

On-screen displays ................................................................................104

Time and date ........................................................................................104

DVB settings ...........................................................................................105

PIP ............................................................................................................ 105

DR+ .........................................................................................................106

Standard Teletext ................................................................................... 107

HbbTV ..................................................................................................... 108

CA module(s) ......................................................................................... 109

Record ......................................................................................................110

WEB key function....................................................................................110

Hard disks .................................................................................................111

Network settings .....................................................................................112

Multimedia settings ................................................................................115

Renderer ..................................................................................................115

Connect ID 40-55 DR+ User guide



Table of contents

System settings (continued) .................................................. 116

Connections ...............................................................................................116

Sound components ............................................................................... 117

Antenna DVB ...........................................................................................121

AV connection settings .......................................................................... 121

Digital Link ............................................................................................... 122

Gaming mode ........................................................................................ 122

Assign digital audio input ...................................................................... 123

External devices .......................................................................124

Devices to the HDMI connections .......................................................... 124

Digital Link HD ........................................................................................... 125

Devices on AV ............................................................................................ 126

Devices on AVS ......................................................................................... 127

Devices on PC IN ...................................................................................... 128

Connecting the Loewe speaker system ................................................ 129

Connecting active loudspeakers ............................................................ 130

Connecting the HiFi/AV amplifier ...........................................................130

Audio playback from external devices ....................................................131

Serial interface RS-232C (RJ12) .............................................................. 131

Operating Loewe units ............................................................................. 132

Teaching the remote control ..................................................133

Loewe Apps ............................................................................................... 134

Loewe Apps ...............................................................................135

Troubleshooting ....................................................................... 137

Technical Data .......................................................................... 139

Technical data ..........................................................................139

Function of the connections ................................................................... 140

Media ........................................................................................................... 141

Signals via AVS (PC IN) / HDMI .............................................................. 142

Signal input groups .................................................................................. 142

Accessories ...............................................................................143

Upgrade kits / conversion kits / cables ................................................ 143

Equipment variants .................................................................................. 144

Mounting options ..................................................................................... 145

Environment .............................................................................146

Glossary .................................................................................... 147

EC Declaration of Conformity..................................................151

Index .......................................................................................... 153

Service .......................................................................................156

Code page ................................................................................. 157

Notes .........................................................................................159

Connect ID 40-55 DR+ User guide

Scope of delivery

• LCD TV set

• Mains cable

• Antenna cable

• Table Stand Dynamic (Connect ID 40 / 46)

• Wall mount WM62 (Connect ID 55)

• Remote control Assist with two batteries

• Quick guide

About this user guide

For best results regarding safety and the longevity of the set, we

recommend you read the chapter For your safety before switching it on for the first time.

The glossary gives explanations of certain terms used in the TV set and the user guide.

Paragraphs which begin with the symbol

indicate important instruc-

tions, tips or conditions for the following settings. Terms which you will find in the menus or printed on the remote control

or TV set are written in bold type. The necessary control elements are shown in the descriptions to the

left of the text containing the instructions for action.

In addition to the remote control, a PC keyboard can be connected to one of the USB ports on your TV and then used to control your TV set.

In the user guide, this symbol indicates places in which the use of a keyboard is particularly advantageous.

Depending on the connected accessory equipment the menus in the TV set can differ from those described here.

All the station names, programme contents, the illustrated photos, titles, albums and album covers in this user guide are examples.

The user guide instructions for your TV set is updated at irregular intervals. We recommend checking now and then, especially after a software update.

General information on menu operation of the TV set

For further information on the user interface and the general operation of your TV set see chapter General information on menu operation.

Interactive data services

In some countries the stations also broadcast interactive data services with their programmes, leading to the functions of individual buttons not being available or only so to a limited extent. You can find out more about this in chapter TV, section HbbTV / MediaText.



Welcome

Thank you,

for choosing a Loewe TV set! At Loewe we combine the highest requirements regarding technol-

ogy, design and ease of use. This applies equally for TV, video and accessories. In addition to sleek design and a varied combination of colour and mounting choices, your Loewe TV set offers a host of technological options.

Loewe Image

Image+ and state-of-the-art full HD LCD displays with LED backlit TV technology guarantee the best image quality and high contrast values and all this at lowest possible energy consumption.

Loewe Digital

The integrated triple tuner for DVB-T/C/S enables the reception of standard as well as high-definition contents and thanks to the CI Plus interface even from Pay TV.

Loewe Sound

Audio competence on the highest level - this is for what Loewe is unique: an integrated multichannel decoder provides 5.1 Home Entertainment of outstanding quality without any external devices.

Loewe DR

Due to Loewe DR+, recording of TV transmissions on the integrated hard disk by simply pressing a key or halting the current transmission are no problem. Additionally, DR+ Streaming enables the retrieval of films on further Loewe devices.

Loewe Assist

The intuitive Loewe user interface Assist Media offers a simple access to all device functions; by means of the HOME key on the remote control you can access all your favourite content as well as all multimedia functions of your TV set.

Loewe Media

The Loewe Miltimedia functions offer you a multitude of options; you have access to your photos, videos and music in your home network or on the USB stick.

Loewe MediaNet and MediaText help you to access numerous worldwide web-applications and contents from HbbTV services.

Loewe Connectivity

Network your TV set by means of numerous interconnection options. Be it HDMI, USB, CI Plus or LAN/WLAN, discover the world of the Loewe networking possibilities.

Connect ID 40-55 DR+ User guide

For your safety, and to avoid unnecessary damage to your unit, please read and follow the safety advice below:

Use for the intended purpose and ambient conditions

This TV set is intended exclusively for receiving and playing visual and audio signals. It must not be used in rooms with a high level of humid- ity (e.g. bathroom, sauna) or a high dust concentration (e.g. work- shops). The manufacturer‘s warranty is only valid for use in the specified permissible environment.

If the unit is used outdoors, make sure that it is protected from moisture (rain, dripping water and splashing water or dew). High humidity and dust concentrations lead to leakage currents in the device. This can result in a shock hazard by touching it or even fire.

If you have moved the unit out of the cold into a warm environment, leave it switched off for about an hour to avoid the formation of condensation.

Do not place objects containing liquids on top of the unit. Protect the appliance against dripping and splashing water. Candles or naked flames must be kept away from the TV set at all times to prevent it from catching fire.

Never place the TV set in a location where it is exposed to vibrations. This may lead to damage.

Transporting

Move the device in vertical position only. Grasp the device on the upper and lower edges of the housing.

If the set has to be put down during packing/unpacking, place the TV set with its entire front surface lying flat on soft material such as a blanket or the fleece from the packing material. Use a blanket or the fleece from the packing material as an underlay.

The LCD screen is made of glass or plastic and can break if not handled properly. Always wear rubber gloves to carry the TV set if the LCD screen is damaged and liquid crystal might be leaking out. In the case of skin

contact immediately rinse thoroughly with water.

Power supply Incorrect voltages can damage the unit. This device may only be con-

nected to a power supply with the voltage and frequency indicated on the type plate using the supplied mains cable. The mains plug of the TV set must be easily accessible so that the device can be disconnected from the mains at any time. When unplugging the unit from the mains, pull at the connector body and not at the cable. The cables in the mains plug could otherwise be damaged and could cause a short-circuit when plugged in again.

Lay the mains cable so that it cannot be damaged. Do not step on the mains cable. The mains cable may not be kinked or laid over sharp edges nor be exposed to chemicals; the latter also applies to the unit as a whole. A mains cable with damaged insulation can cause electric

shocks and poses a fire risk.

Air circulation and high temperatures

The vent slots on the rear panel of the set must always be kept unobstructed. Please do not place newspapers or cloths on/over the TV set.

Ensure that there is at least 10 cm free space on the sides and above the set for air circulation, if the set is placed in a cabinet or on a shelf.

Like any electronic device, your TV set requires air for cooling. Obstruction of the air circulation can cause fires.

Prevent metal items, needles, paper clips, liquids, wax, or similar items, from getting into the interior of the device through the vent slots in the rear panel. Such objects can cause short circuits in the set, which could possibly cause a fire.

If something should get into the interior of the set then immedi- ately unplug the mains plug of the device and contact the field service for more information.

Note on the LCD screen

The TV set with LCD screen you have purchased satisfies the most rigorous quality requirements and has been inspected with respect to pixel errors. Despite of thorough care when manufacturing the display, it cannot be 100% guaranteed that no subpixel defects will occur due to technical reasons. Please understand that these types of effects, as long as they are within the standard of specified limits, cannot be considered as a device defect in terms of the guarantee.

Avoid displaying still images for long periods of time. It is possible that a copy of the image may remain.

TV sets with 3D function

Read the following safety instructions before using the 3D function of your TV set.

Please use the Loewe 3D TV sets only with the Loewe 3D glasses which can be purchased as an accessory from your Loewe dealer (see chapter Accessories).

People that have a visual disorder may not be able to perceive 3D effects or may only be able to perceive them to a limited extent. People who are sensitive to flickering images (e.g. those with epilepsy) should only use the 3D function after having consulted their doctor.

It might take some time for you to get used to the 3D glasses and before you can perceive the 3D effects properly. Stop using the 3D function immediately if you experience any feelings of nausea, dizziness or malaise when viewing 3D content.

Supervise children whilst they are viewing 3D content, as they can be particularly sensitive to it.

Allow more time for a break when viewing 3D films, so that you are able to relax. Failure to do this could result in headaches, fatigue, dizziness or malaise.

Position yourself comfortably in front of the 3D TV set and ensure that you are seated firmly. By doing this, you will avoid any injuries that may arise due to reacting to extreme 3D content.

Switch off any artificial light sources (e.g. energy saving lamp) between the 3D TV set and the 3D glasses. These could impair the infrared reception or the TV picture may flicker as a result.

10 cm



For your safety

Connect ID 40-55 DR+ User guide



For your safety

Set-up

Loewe Flat TV sets are specified for Loewe accessories. The TV set is suitable for different mounting options. Note the assembly instructions regarding the different possible mounting options.

When using accessories from other manufacturers take care that the TV set can be easily inclined or rotated on the respective mounting option.

For mounting options from other manufacturers with motor drive, make sure that the TV set cannot be rotated manually. The use of mounting options from other manufacturers with locks in certain positions is generally discouraged.

During the adjustment of the TV set it is essential to ensure that the pressure exerted on the device frame is not too large. Especially in case of large-format displays there is a risk to damage the screen.

Before setting up the device, please check that the final location is suitable to bear the load of the device in terms of surface (sensitivity to pressure) and stability (statics). This is particularly the case for the high-gloss painted surfaces and surfaces that are made from real wood / real wood veneer or plastic surfaces.

Place the TV set with the table or floor stand only on a level, sturdy, horizontal base. Particularly ensure that the set does not protrude to the front when placed in or on pieces of furniture. Place the TV set in a normal position for use. TV set may only be used in an upright horizontal position. It may not be tilted by more than 10 degrees. The TV set must never be operated in portrait position, lying flat or hanging overhead from the ceiling.

Set up the device where it is not exposed to direct sunlight and where it is not exposed to additional warming through heating elements.

Mounting a Loewe flatscreen TV set to a holder according to the VESA standard necessarily requires the use of Loewe Vesa adaptor bolts to prevent damage to the TV set.

When mounting the TV set, always check that all four Loewe Vesa adaptor bolts are used.

The Loewe Vesa adaptor bolts are used to ensure stability and the necessary distance between rear wall of the TV set and Vesa-Holder (at least 5mm).

The Loewe Vesa adaptor bolts are fastened

with a torque of about 4 Nm on the TV set. If you use a Vesa mounting options from other manufacturers, you can order the Vesa adapter bolts M8x32 (No.

90458.957) at your author-

ized dealer of Loewe.

Supervision

Do not let children loiter and play unsupervised close to the device. The set could tip over, be pushed off or pulled down from the stand surface and injure someone.

Do not allow the switched-on TV set to run unattended.

Volume

Loud music can lead to ear damage. Avoid extreme volume especially over long periods and when using headphones.

±10°

Thunder storms

Pull out the mains plug and all connected antenna cables from the TV set in a thunderstorm. Overvoltage caused by lightning strokes can damage the set via the antenna system, as well as via the mains. The mains plug and all connected antenna cables should also be pulled out during long periods of absence.

Automatic shutdown

If the TV is not operated for 4 hours (adjustment of volume, programme change, etc.) the TV will automatically switch to stand-by mode to save energy. A prompt to terminate this shutdown process appears one minute before expiry of the 4 hours. The automatic shutdown is generally active for the TV mode as soon as the energy efficiency mode Home Mode is enabled for at least one of the six signal input groups (see chapter Technical Data, section Signal input groups). This also applies if another energy efficiency mode is selected during initial installation, but one of the signal input groups is subsequently set to Home Mode. Automatic shutdown does not occur when using the radio without screen display (screen off).

Cleaning and care

Switch off the TV set with the main switch prior to cleaning.

Clean the TV set, the screen, and the remote control unit with a soft, moist, clean and colour-neutral cloth only, without any aggressive or scouring cleaning agents.

The speaker panel of your TV set is covered with textile. Vacuum the surface regularly using a soft brush set.

In case of dirt or stains: Moisten a soft, colour-neutral cloth with detergent or normal stain remover and gently rub away the stain. You can also treat the mark/ stain directly with normal dry stain remover spray (vacuum up powder). Do not moisten the covering fabric directly with detergent or stain remover (risk of encrustation). Do not use any solvents to clean the fabric.

Follow the manufacturer’s instructions when using stain removers. There is an increased risk of encrustation when cleaning speaker

panels with nicotine deposits.

Repairs and accessories

Never remove the back of the TV set yourself. Have your TV set repaired or serviced by authorised television technicians only.

Only use original accessories such as Loewe stands, if possible (see chapter Accessories).

Connect ID 40-55 DR+ User guide



Basic Functions

The assignment of these keys can be changed (see chapter External devices, section Operating Loewe units).

The assignment of these keys can be changed (see chapter System settings, section Control – Web key function).

On/Off of the television set

Switching the TV set ON / switching it OFF in Standby mode (Mains switch must be switched ON)

When TV set is switched on: Press key long: Switch TV set and all CEC-capable devices connected to the HDMI interfaces OFF to Standby mode (System Standby).

General navigation

Navigation on the user interface, select

objects

Select station

OK short: Call station list. Or: OK long: Call expanded station list.

 Mark station, OK switch over to station.

Or:

P+/P– Next/previous channel

Or:

Select station with numerical keys

Sound

V+/V– Increase/reduce volume

Sound on/off

Colour key function during TV operation

Red key: Start HbbTV or value-added network

service

Yellow key: Last selected station

Blue key: Call function list

(selection of language/sound,

subtitles or channel/video track)

Function of the coloured keys in audio mode

Green key: Switch screen ON/OFF

Yellow key: Last selected station in DVB radio mode

Key functions

TV operation

Call radio mode (standard assignment)

Call Home view, Select the operating mode or the function

Pressing briefly, during screen fade-in function: Info display, info text appropriate to the content that can assist you further, should you have any questions about your TV device;

Pressing briefly without on-screen display: access status display. With status display open and repeatedly pressing the key call / close the detailed information on the broadcast

Pressing long: show key explanation

Pressing briefly: Open the DR+ archive Pressing long: Call up the timer list

Add current object to Home favourites

Call MediaNet (standard assignment)

On/Off EPG (Electronic Programme Guide)

On/Off PIP (picture in picture)

Turn Teletext/MediaText on/off

Pressing briefly: Call function list for the active

operating mode

Pressing long: call System settings

Pressing briefly: step / level back Pressing long: close all displays

Connect ID 40-55 DR+ User guide



Remote control

The assignment of these keys can be changed (see chapter External devices, section Operating Loewe units).

The assignment of these keys can be changed (see chapter System settings, section Control – Web key function).

Depending on the corresponding settings.

Sound mute/on

LED display for currently operated device

Switch to TV mode

Reassign remote control to SetTop-Box (PACE DS440N)

DR+ archive on/off

Define active object as favourite

Electronic Programme Guide on/off

Teletext/MediaText

on/off

Call function list

V+/V- Increase/reduce volume

Call station list / expanded station list

In the menu: confirm/call up

Green coloured key: screen on/off

Red coloured key: call preferred value-added network service

Jump / wind

Direct recording (One Touch Recording)

Start / interrupt timeshift television

Finish timeshift

Jump / wind

Start / continue timeshift television

Blue coloured key: call station function list with subfunctions

Yellow coloured key: switching to previously received station

In menu / in lists: selecting/setting

P+/P– Select stations up/down

Press briefly: back to previous window (step back)

Press long: close all displays

Status display on/off

In menu: context-relevant Info on/ off

PIP (picture in picture) on/off

Open/close

Home

view

AV list

Select station directly

In the menu: Enter numbers or letters

Call MediaNet

Reassign remote control to BluTech Vision 3D

Switch to radio mode

Switch ON/OFF to standby mode

System standby

The key assignment displayed here is valid for the main level of the TV set. The key assignment may vary in certain operating modes (see the corresponding chapter in this user guide).

Connect ID 40-55 DR+ User guide

Functions of the operating elements

Mains switch:

The mains switch is located on the bottom of the set. Always return the TV set to Standby mode before switching it off

with the main switch.

The TV set will be completely separated from mains only when

you unplug the mains cable.

On/Off key:

Switching on in standby mode Switching off to the standby mode

IR receiver:

Infrared receiver for receiving the remote control commands.

Display:

white: TV set in standby white, intermittent: TV set starts green: TV set switched on red: timer recording active blue:

TV set in standby and background operation active (EPG data updating, software update or DR+ streaming server function)

Infrared transmitter:

When showing 3D content, the 3D glasses Loewe Active

Glasses 3D are controlled via the infrared sensor.

Key M:

TV set in standby mode: switch TV set on in TV mode TV set switched on: call direct control on TV set in direct control on TV set: up 

Key R:

TV set in standby mode: switch TV set on in radio mode TV set switched on: toggle TV mode and radio mode Direct control on TV set: down 

Key +:

increase volume Direct control on TV set: to the right 

Key – :

reduce volume Direct control on TV set: to the left 



Operating controls on the TV set

Connect ID 40-55 DR+ User guide

SPDIF OUT - Digital audio output

SPDIF IN - Digital sound input

CENTER IN - Centre audio input (analogue)

DIGITAL AUDIO LINK - Surround audio outputs (digital)

AUDIO OUT - Audio output (analogue)

AV - Mini AV socket

AUDIO IN - Audio inout (analogue)

PC IN - VGA-/XGA input

HDMI 1 - HDMI input 1 (with HDMI ARC support)

HDMI 2 - HDMI input 2

HDMI 3 - HDMI input 3

LAN - Network connection

USB - USB connection

ANT TV - Antenna/cable analogue/digital

ANT SAT - Satellite antenna (Sat tuner 1)

ANT SAT 2 - Satellite antenna (Sat tuner 2)

CI-COMMON INTERFACE - Common Interface 1 (CI slot 1)

CI-COMMON INTERFACE - Common Interface 2 (CI slot 2)

HDMI 4 - HDMI input 4

USB - USB connection

- Headphone connection

AVS - S-Video connection (AVS)

AUDIO IN R - Audio input right (AVS)

AUDIO IN L - Audio input left (AVS)

RS-232C - Serial interface (2

IR LINK - Infrared transmitter connection

Socket for Kensington lock

AC IN - Mains connection



Connections rear side of the device

Adaptor set is available as an accessory (see chapter Accessories).

1 2

12 13

Connect ID 40-55 DR+ User guide

Installing the TV set

Mounting options

Your Loewe specialist dealer can assist you in finding other mounting options that correspond to your needs. Use exclusively Loewe mounting options (e.g., wall bracket, floor stand), which you will find in the chapter Accessories, section Mounting options.

After you have decided on a mounting option, follow the directions found in the corresponding assembly instructions.

Installation notes

Choose a place for installing your TV set where no bright light or sunlight shines directly onto the screen. This could cause reflections which impair the picture.

3 times the screen diagonal can be taken as a guide value for the viewing distance (e.g., for a 46-inch set approx. 3.5 m for SD signal). The viewing distance can be reduced with an HD signal.

Set covers

Covers for rear and side connections

In order to remove the rear side cable covers pull them simply from the device.

To fit the cover, insert the lugs at the top edge of the cover into the corresponding cut-outs in the rear panel and push up the cover until it snaps in.

The side cover of the TV set can also be completely removed. For this, open it as far as it will go and gently pull on the open cover.

The cover detaches from the holder and gives free access to the connection area. To replace the cover, simply push it until it latches back into place.

into place

Connecting the TV set

Connecting to the mains supply

Remove the cover for the connections. Connect the TV set to a 220-240V mains socket:

First plug the small plug of the power cable into the mains connection on the back of the TV and then the large mains plug into a mains socket.

Connecting antennas

Cable (analogue) / DVB-C / DVB-T antenna: Plug the cable of antenna, cable TV system or room antenna into the

ANT TV socket. If you want to use analogue cables / DVB-C connection and a DVB-T antenna together, use an external antenna switch (available from your dealer).

Satellite antenna DVB-S:

Depending on the used satellite system, connect a connecting cable from the multi-switch or directly from the LNC to the ANT-SAT and ANT-SAT2 sockets of the TV set respectively.

When connecting the TV set to a single cable community antenna, connect the ANT-SAT and ANT-SAT2 sockets directly to the appro- priate SAT antenna socket.

When connecting the TV set to a DiSEqC single cable community antenna (in accordance with EN 50494), connect the ANT-SAT socket directly to the appropriate SAT antenna socket.

In case of a DiSEqC one cable communal system you require only

one antenna cable. Further distribution of the signal to the two reception routes is accomplished by the TV set's satellite tuner.

Ask your dealer in this regard.

R TV

Cable analogue / DVB-C

DVB-T DVB-S



Preparing the TV set

Connect ID 40-55 DR+ User guide

Connecting the TV set to the Home network

You may link your TV set to the home network by a wired connection (Ethernet, Powerline) or by a wireless radio connection (WLAN). Please contact your specialist dealer for more information on Powerline.

For the network adaptor configuration, see chapter System settings, section Multimedia / Network– Network settings.

Under no circumstances may the TV set be wired and at the

same time connected by a wireless connection to the same network, e.g. router. This may cause severe operational faults!

Example for a wired connection

Connect the LAN socket of your TV set to the LAN switch/router of your home network with a network cable (available from your dealer).

Example for a wireless connection

You can connect the TV set to your home network by a wireless radio connection via the WLAN antenna inside the set.

Shadow effects of various materials, such as reinforced concrete, metal surfaces, etc., attenuate the WIFI signal sometimes significantly or completely.

DSL

WLAN router

TV set



Preparing the TV set

DSL

LAN switch/router

TV set

Connect ID 40-55 DR+ User guide

Bundling the cables

Connect ID 40/46

When installing the TV set with the mounting option Table Stand Dynamic (included in scope of delivery):

Thread the Velcro cable tie (K) through the holder of the Table Stand, connect the cables to the TV set and secure them with the Velcro cable tie. For more information, refer to the installation instructions of the Table Stand Dynamic.

Then fit the cover for the connections (see chapter Preparing the

TV set, section Set covers).

Connect ID 55

When installing the TV set with the WM62 wall bracket mounting option (included) it is not possible to fix the cables to the TV set.

Preparing the remote control unit

Inserting or replacing batteries

Press on the embossed arrow whilst pushing the battery cover down. Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese

type. Do not use different types of batteries and old and new batteries together.

The batteries used must not be exposed to excessive heat such as sunlight, fire or similar!

Pay attention to the correct polarity of + and – when inserting the batteries.

If the batteries are too weak after longer use, the TV set prompts you to change the batteries.

Dispose of used batteries in an environmentally friendly way (see chapter Environment / Legal information).

Push the cover back on from below after having inserted the batteries.

Adjusting the remote control for operating the TV set

Press the TV key.

See in chapter External devices,section Operating Loewe units how to operate other Loewe appliances and how to re-programme the remote control keys.



Preparing the TV set

AAA LR03

Connect ID 40-55 DR+ User guide

Switching the TV set ON/OFF

Switching TV set to the standby mode

Press the mains switch at the bottom of the set. The indicator in the control panel on the front side lights up white. The

set is now in standby mode.

Switching the TV on/off on the control unit

To switch the TV set into Operating mode or switch it off to Standby mode, press the middle of the On/Off button for about 2 seconds.

Meaning of the colour of the LEDs in the On/Off button:

white: TV set in standby white, intermittent: TV set starts green: TV set switched on red: Timer recording active blue: TV set in standby and background opera-

tion active (EPG data updating, software update, DR+ streaming server function)

After switching on the TV set, it takes a few seconds for further

operating commands to be processed (Exception: Quick start mode, see chapter System settings, section Control – Quick start mode). Your TV set is ready to operate as soon as the status indicator in the control panel lights up in green.

Mains switch

Control unit

Display

Switching the TV set on by means of the remote control

Press the on/off key.

Or:

Press the TV key. The previously watched station will be called.

Or:

Press numerical keys 1-9. The corresponding station will be called.

After switching on the TV set, it takes a few seconds for further

Switching the set off with the remote control (Standby)

Press the on/off key.

Before switching off the set with the mains switch,

we recommend you to switch it to standby mode.

Switching off the TV set and connected additional devices (System standby)

Press on/off key long:

Switch TV set and all CEC-capable devices connected to the HDMI interfaces OFF to Standby mode (System Standby).

Technical information

Switching off the TV set with the mains switch during operation or an inadvertent disruption to the power supply (e.g. power failure) can cause damage to the hard disk file system and hence loss of the recorded broadcasts. Always return the TV set to Standby mode before switching it off with the main switch. Never ever disconnect the USB storage device from the TV set during a copy process.

However, if unexpected problems occur when operating the hard disk, formatting the hard disk may rectify this. Refer to the instructions in chapter System settings, section Control – Hard disks. This applies also to the use of external USB hard disks with the TV set.

Loewe are not liable for the loss of data on the integrated hard disk of your TV set. To avoid data loss, we recommend copying important recordings to an external storage medium.



Switching the TV set ON/OFF

Connect ID 40-55 DR+ User guide



General information on menu operation

Some keys of the remote control for operating the TV set you will use more often than others. The most important keys for navigation will be explained in general. The numbers in the text refer to the figure showing the remote control in chapter Remote control.

The arrow keys

help you to navigate in the menus and lists of the TV set and for selecting menu items. They are arranged in the middle of the remote control in a circle around the OK key

. Later in this

quick guide they will be represented as follows:

 Select the desired item.

The OK key

is used to confirm a selection, for calling the highlighted menu item and for opening the station list. In this quick guide, an instruction for this key looks like the following:

OKconfirm.

Using the numerical keys of your remote control

you enter programme channels and teletext pages directly. With key 0 you open the AV list. In this user guide, entering numbers with numerical keys is shown as follows:

Entering programme channel directly.

The numerical keys are also used to enter text (see chapter General

information on menu operation,section Entry of characters by remote control).

The Home view is the central overview page for all of your TV set‘s operating modes. You reach Home view with the HOME key

HOME: Call Home view.

Pressing the BACK key

briefly brings you one level up in the wizard. Pressing the BACK key longer closes all opened fade-ins. An example for the BACK key in this quick guide:

BACK: Stop text entry and exit entry box.

Prolonged pressure on the INFO key

shows a key guide window that

gives you information on the currently most important key functions.

If the function for a key is not available, this will be indicated by an inserted symbol

on the right above.

Structure of the Menu screen

Basically, the structure of the different menu screens is similar, depending on the fact if a wizard, rendering media content or a setup menu are concerned. The structure is explained by means of three different screens.

The functions of these menu screens are explained more detailed in the respective chapters.

Screen structure: Wizard

(A) Title bar with name of the wizard and the current operating step.

(B) Selected items, whose number can be different according to the

operating step.

instructions and information are inserted.

Screen structure: Rendering of media content (example: Audio player)

(A) Title bar with selected album / subdirectory.

(B) Menu item Back to exit the menu or to go back to the previous

menu item.

(D) Time bar

(E) Bottom line with the different symbols for controlling the playback

function.

INITIAL INSTALLATION - Menu language

Proceed withBack with

Which menu language do you want to use for operation?

Deutsch (de) Ελληνικά (el) Svenska (sv)

English (en) Polski (pl) Dansk (da)

Français (fr) Magyar (hu) Português (pt)

Italiano (it) Suomi (fi) Русский (ru)

Español (es) Slovenščina (sl) Norsk (no)

Nederlands (nl) Slovenčina (sk) ₼㠖 (zh)

Čeština (cs) Türkçe (tr)

Chasing Cars Shut Your EyesHands Open

Snow Patrol / Eyes Open

00:00

02:56

04:27

Back

Connect ID 40-55 DR+ User guide



General information on menu operation

Screen structure: Setup (example: picture)

(A) Selected function in the Home overview (here: system settings)

(B) Home Menu System settings, with selected menu item Picture.

(D) Help text for the selected menu item Picture > 3D

Navigation: Selection of elements (example: On-screen displays)

Highlighting and thus selecting the symbols/elements or menu items on the screen can be effected by the arrow keys on the remote control. So you can see all the time where you are. As soon as there is a bar above a symbol or text, this is a selected element.

(A) Selectable elements / menu items.

(B) The text in the line where the marker is currently located is white.

to the menu item to be set.

The position of the marking is easy to see by the blue line.

In most cases, the marked menu item will be automatically

adopted. The font colour of the previously active item will change to grey, that of the newly selected item to white.

In a few menus, to confirm a selected menu item is required by

pressing OK.

CB D

Picture

Picture adjustment

Contrast

Brightness

Colour intensity

Image+ Active

Picture format

more ...

If your desired display format has not been automatically selected then you can choose it in the 3D settings menu. You may display the 3D image in 2D or vice versa.

......

On-screen displays

Display time

Volume display

Automatic menu info

Key explanation

Permanent clock display

Automatic HDMI hint

On-screen displays

If you select "on" here, the informational text belonging to each selected menu item will always appear simultaneously.

Back

< 7s >

off on

< 7s >

off on

Navigation: Wizards

If the menu item(s) (marked white) is/are already correctly preset:

Go to next step.

Otherwise: Mark the menu items to be changed. The

update will be adopted automatically. The fount colour of the previously active item will change to grey. If not,

OK confirm the selection.

Go to next step.

Navigation: Element selection in lists using initials

Using the numerical keys of the remote control you can jump into list, e.g., Internet radio station lists.

If the list is sorted in alphabetical order, you jump to the entered letter. For example, when pressing the key 7 three times you jump to the first list element starting with letter R.

In case of numerical sorting, you can directly select the stations with the numerical keys.

Please specify whether you want to search for scrambled stations too. Note: Scrambled stations can only be received with an integrated CA module and additional card.

Scrambled stations

Search method

Symbol rate

Accept Logical Channel Number

DVB-S settings (ASTRA1 19,2°E)

Back with Proceed with

yes

Network search

Frequency search

22000

yes

Connect ID 40-55 DR+ User guide



General information on menu operation

Entering characters with on-screen keyboard

For cer tain functions, entering letters or characters is required, e.g., for Web addresses (URLs) in the browser or for renaming archive entries. An on-screen keyboard appears for entering text.

highlight character / on-screen button, OK Adopt character.

In the event of letters with a triangular, additional

letters are displayed when pressing the OK button longer (2 sec).

For the selection of special characters use the .-/

field.

To conclude the entry:

 Mark Adopt, OK confirm the selection.

Entry of characters by remote control

Alternatively to the on-screen keyboard you can also enter the desired characters by means of the remote control (as with the keypad of a mobile phone).

 Mark text entry field.

Under the 1st letter of the name you will see a line indicating the current input position.

Input position one character to the right (also for

blanks).

Input position one character to the left.

Input the letters one after another. When using the remote control, press the numerical keys just as on a mobile phone keypad (0-9) until the desired symbol is displayed. The available letters are printed on the individual numeric buttons.

You find the exact key assignment in the character table in the right column.

To conclude the entry:

 Mark Adopt, OK confirm the selection.

.-/

ABC

http://www.loewe.de

.com .net . /.dewww.

Enter/change internet address

Back

Adopt Cancel

Delete Cancel AdoptSpace

(2 sec) on a letter with a triangle shows more letters

Table of characters for entering text by means of the remote control

Key Characters (uppercase - lowercase)

[space] 1

A B C 2 Ä Æ Ã Å Ā À Á Ć Ç Č - a b c 2 ä æ ã å ā â à á ć ç č

D E F 3 Ė Ë Ē Ę Ê È É - d e f 3 ė ë ē ę ê è é

G H I 4 Ï Ī Į Î Ì Í - g h i 4 ï ī į î î ì í

J K L 5 - j k l 5

M N O 6 Ö O E Õ Ō Ô Ò Ó Ø - m n o 6 ń ñ ö o e õ ō ô ò ó ø

P Q R S 7 ß - p q r s 7 ß

T U V 8 Ü Ū Û Ù Ú - t u v 8 ü ū û ù ú

W X Y Z 9 - w x y z 9

. 0 - / _ : + , ; ? ! = & # % ~ @ $ * ’ ( ) ” § \ { } [ ] < > ´ ` ^ |

Connect ID 40-55 DR+ User guide



General information on menu operation

Operation without remote control

Changing Volume

+ / – Increase/reduce volume.

Switching radio on or off or switching to radio

R Radio on or switch between TV and Radio.

Calling direct control on TV set

M Call direct control on TV set.

R Scroll down. M Scroll up. – Scroll left. + Scroll right, adopt settings, confirm.

Close all displays

Press M longer.

Explanations of the settings:

Operating

mode

Switch between TV and radio operation.

Station

selection

Call Station selection.

AV selection Select AV interface.

3D Calling 3D settings.

Contrast Set contrast.

The power consumption of the TV set depends directly on the value set here.

Picture

format

Selecting the picture format.

Service

The Service menu item is provided for service

purposes by dealers only.

Operating mode

Station selection

AV selection

Contrast

Picture format

Service

Info display

The info display provides an info text appropriate to the on-screen display that can assist you further with the operation of your TV set.

An on-screen display is faded in.

The factory setting is that the info display is shown automatically for each menu item. In this case you can temporarily hide the info texts with the INFO key.

The automatic info display can be hidden via a menu setting. Then it can be displayed temporarily by pressing the INFO key.

Permanently display or hide the automatic info display

Once you have become familiar with how to operate the TV set, you can switch off the automatic info display.

HOME: Call Home view.

 Mark System settings, OK call system settings.

Mark Control,  go to next column.

Mark more ...,  move to next column.

 Mark On-screen displays, call on-screen display settings.

 Select Automatic menu info, select on / off.

OK adopt settings.

...

Energy efficiency

Home Mode

Premium Mode

Shop Mode

The priority here is low energy consumption in home use. In this case, the TV switches off automatically for the sake of saving energy, after it has been out of operation for four hours.

......

On-screen displays

Display time

Volume display

Automatic menu info

Key explanation

Permanent clock display

Automatic HDMI hint

On-screen displays

If you select "on" here, the informational text belonging to each selected menu item will always appear simultaneously.

Back

< 7s >

off on

< 7s >

off on

Connect ID 40-55 DR+ User guide



Initial installation

Initial installation wizard

Initial installation after switching on for the first time

The Initial installation wizard starts automatically with an initial installation. It may be called repeatedly again (see chapter Extras ,section Special functions – Repeat initial installation).

If at least one station is locked, the access code must be entered before repeating initial installation (see chapter System settings, section Control – Parental lock).

For information on navigation within the wizard refer to chapter

General information on menu operation.

First installation wizard routine

The selected settings affect the routine of the Initial installation wizard.

 Select desired Menu language.

Selecting the language of the user guidance is the wizard’s first step. Then you simply follow the instructions on your TV screen.

 Proceed to next step.

 Select Energy efficiency.

Determine how energy efficient your TV set shall

be. The value for the contrast (and thus the brightness of the background lighting) is adapted and the automatic dimmer activated or deactivated depending on the presetting.

Choosing Home mode automatically activates

shutdown. For Premium mode or Shop mode, automatic shutdown is initially deactivated.

See chapter For your safety for further informa-

tion on automatic shutdown.

Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)

English (en) Polski (pl) Dansk (da)

Français (fr) Magyar (hu) Português (pt)

Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru) Español (es) Slovenščina (sl) Norsk (no) Nederlands (nl) Slovenčina (sk) 中文(zh) Čeština (cs) Türkçe (tr)

INITIAL INSTALLATION - Menu language

Proceed with

Which menu language do you want to use for operation?

language

Here you define how energy efficiently you operate your TV. With the "Home Mode" setting you put the focus on low energy consumption for home use. The "Premium Mode" is optimised to a brighter environment with a higher energy consumption. The "Shop Mode" is designed for operation in a showroom.

Note: If you select "Home Mode" here, the TV set will automatically switch off to save energy after no longer being operated for 4 hours.

Energy efficiency

Back with Proceed with

Home mode Premium mode Shop mode

Energy

efficiency

Home mode:

The emphasis for home use is on low energy consumption. The automatic dimmer is activated.

Premium mode:

This mode optimises the settings to a brighter environment at a higher energy consumption. The automatic dimmer is activated. The use of this energy efficiency setting must be confirmed afterwards once again.

Shop mode:

The picture settings are aligned to operation in the presentation room. The automatic dimmer is deactivated. If the ambient brightness diminishes, the energy consumption is not reduced. The use of this energy efficiency setting must be confirmed afterwards once again.

The presetting can be changed later in Extras ט

Energy efficiency or in the System settings under Pictureט Picture adjustment.

 Proceed to next step.

 Select the Operating mode.

Use the TV set as a TV set: Continued with Location of TV set (see below).

Use the TV set just as a monitor: see chapter Initial installation, section TV set as a monitor.

 Select Location of TV set (national defaults

are adopted).

For certain locations (e.g., Australia), there

is finally a selection screen where you can indicate in which state/territory the device is being operated.

 Proceed to next step.

Energy

efficiency

(continued)

Operating

mode

Please specify if you wish to use the full TV function of your set, or if you wish to use it purely as a monitor.

Operating mode

As TV set As monitor only

Back with Proceed with

Please specify the location of your TV set so that the available stations can be sorted according to the specify country.

Location of TV set

Back with Proceed with

(DK) Denmark

(E) Spain

(F) France

(FIN) Finland

(H) Hungary

(I) Italy

(IRL) Ireland

(L) Luxembourg

(N) Norway

(NL) Netherlands

(NZ) New Zealand

(P) Portugal

(PL) Poland

(RUS) Russia

(S) Sweden

(SK) Slovakia

(SLO) Slovenia

(TR) Turkey

(UK) United Kingdom

Other country

Location of

TV set

Connect ID 40-55 DR+ User guide



Initial installation

Select antenna cable. OK Connect/disconnect antenna cable. Ahead of each selected antenna, the symbol

appears.

Cable analog: analogue stations via

cable

Terrestrial (DVB-T): digital stations via

antenna

Cable (DVB-C): digital stations via

cable

Satellite (DVB-S/cable 1): digital stations via

satellite

Satellite (DVB-S/cable 2): digital stations via

satellite

 Proceed to next step.

 Considering the plugged CA module(s) specify

which stations should be searched automatically.

If the CA module(s) do(es) not support this func-

tion or if no CA module is plugged in, this step will be skipped.

 Proceed to next step.

Depending on the antennas (analogue cable, DVB-T, DVB-C, DVB-S) selected, the appropriate settings appear below.

Antenna cable(s) for: to antenna socket(s):

Cable analog ANT TV

Terrestrial (DVB-T) ANT TV

Cable (DVB-C) ANT TV

Satellite (DVB-S / cable 1) ANT SAT

Satellite (DVB-S / cable 2) ANT SAT2

Your television will automatically search for stations. With , highlight which antenna cables are available for your TV set and connect them to the correct antenna sockets, which are specified here in the right-hand column.

Connect antenna cable(s)

Back with Proceed with

Selecting antennas

The CA module "name module" provides a special station list "name list".

Taking this into consideration, specify which stations are to be searched

automatically and mark at least one of the two items below with .

All receivable stations excluding stations in the special station list

Stations in the special station list "name list"

Extent of station search

Back with Proceed with

Extent of

station search

Setting options for reception via analogue cable:

If you have not selected Cable analog in the list of available antennas: Proceed to Setting options for DVB-T reception.

The selection of a Colour standard is only required when the Location of TV set Other country was selected. Otherwise, the country-specific default settings will be preset when selecting the Location of TV set. This step will be skipped then

 Select appropriate colour standard.

 Proceed to next step.

Depending on the antennas (analogue cable, DVB-T, DVB-C, DVB-S) selected, the appropriate settings appear below.

Please select the TV/colour standard.

Automatic BG+L SECAM-BG

PAL-BG SECAM-DK PAL-DK SECAM-L PAL-I NTSC

TV/col. standard

Back with Proceed with

TV/col.

standard

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for DVB-T reception:

If you have not selected DVB-T antenna in the list of available antennas: Proceed to Setting options for DVB-C reception.

If a CA module is plugged in during Initial installation and if the item Station of the special station list was selected in Extent

of station search, the routine continues with the step Supply voltage (see right column).

If several networks are available via DVB-T, you can decide which network you want to receive your channels from.

Select network,

OK Confirm selection.

 Proceed to next step.

 Select and adapt settings for DVB-T reception.

Network

selection

Please state from which network you wish to receive your station. Note: The newly selected parameter must be confirmed with the button.

Freeview

other network

Network selection (DVB-T)

Back with Proceed with

Please specify whether you want to search for scrambled stations too. Note: Scrambled stations can only be received with an integrated CA module and additional card.

DVB-T settings

Search method

Accept Logical Channel Number

Scrambled stations no yes

Channel search Frequency search

no yes

Back with Proceed with

Settings

Scrambled

stations

You can state whether coded stations are to be searched for in the search/update.

Select yes to save all found scrambled stations. However, these stations can only be received in connection with a CA module and the appropriate Smart Card.

Handling of the CA module is described in chapter Extras, section CA module.

method

If you want to run the station search independently of the channel grid, select Frequency search for the search method.

Logical Channel Number

In various countries, digital stations (DVB-T) are transmitted with a preset channel number per station, known as Logical Channel Numbers (LCN).

If you select yes here, these default channel slots will be used and the channels of the preferred signal source will be sorted as per LCN. The stations in the station list can no longer be shifted.

 Proceed to next step.

 Select supply voltage no / yes.

If you use a DVB-T antenna that requires a supply

voltage (active antenna) and which is not already supplied via a power adaptor, then select yes (5V) for the antenna’s power supply.

How to align your DVB-T antenna is described in

chapter System settings, section Connections

– Antenna DVB.

 Proceed to next step.

Please state here whether your DVB-T antenna needs a supply voltage. Antennas with an integrated amplifier need a supply voltage on the antenna line.

Supply voltage DVB-T antenna

no (0V) yes (5V)

Back with Proceed with

Supply voltage

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for DVB-C reception:

If you have not selected DVB-C antenna in the list of available antennas: Proceed to Setting options for DVB-S reception.

If a CA module is plugged in during Initial installation and if the item

Stations in the special station list was selected in Extent of station search, the station list of the CA module will be adopted.

Further settings described on this page will then be skipped. The procedure of the initial installation will then be continued with the step Setting options for DVB-S reception.

If several networks are available via DVB-C, you can decide which network you want to receive your channels from. The normal DVB-C settings are derived from the selection of the location or network and do not need to be changed. Exactly which of the following settings are present is dependent on which network is selected.

 Select network.

OK Confirm selection.

 Proceed to next step.

 Select and adapt settings for DVB-C recep-

tion.

Network

selection

Please state from which network you wish to receive your station. Note: The newly selected parameter must be confirmed with the button.

Unitymedia

Standard

Network selection (DVB-C)

Back with Proceed with

Please specify whether you want to search for scrambled stations too. Note: Scrambled stations can only be received with an integrated CA module and additional card.

DVB-C settings

Scrambled stations

Search method

Start frequency

Network ID

Accept Logical Channel Number

no yes

Network search Frequency search

044.00 MHz

none 00000

no yes

Back with Proceed with

Settings

Scrambled

stations

You can state whether coded stations are to be searched for in the search/update.

Select yes to save all found scrambled stations. However, these stations can only be received in connection with a CA module and the appropriate Smart Card.

Handling of the CA module is described in chapter Extras, section CA module.

method

If you select Frequency search here, a search is performed for all receivable stations. With Network search, only the stations which the networks supply are searched - either for all receivable networks or only for the particular network specified under Network ID.

Start

frequency

The DVB stations are only searched for in the frequency range above the start frequency.

Network ID

If you select none here, DVB signals of all current transmitter networks are searched automatically (recommended for most cable networks). If, on the other hand, you specify a cer tain network ID (necessary in the cable networks of some countries), only DVB signals of this broadcasting network are searched for automatically. Your cable provider has the information you need.

Logical Channel Number

In various countries, digital stations (DVB-C) are transmitted with a preset channel number per station, known as Logical Channel Numbers (LCN).

If you select yes here, these default channel slots will be used and the channels of the preferred signal source will be sorted as per LCN. The stations in the station list can no longer be shifted.

 Proceed to next step.

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for DVB-S reception:

If you have not selected DVB-S antenna in the list of available antennas: Proceed to Setting options for all types of reception.

 Select network. If several networks are available via DVB-S, you can

decide which network you want to receive your channels from.

 Proceed to next step.

 Selecting the satellite system.

Specify how you receive which satellite(s) (single

satellite or type of satellite system). Ask your dealer in this regard.

The normal DVB-S settings are derived from the

selection of the location and do not need to be changed in most cases.

Network

selection

Please state from which network you wish to receive your station. Note: The newly selected parameter must be confirmed with the button.

ASTRA LCN

Standard

Network selection

Back with Proceed with

Please define which satellites you receive or which satellite equipment you use.

Select satellite installation

Indietro con Avanti con

Single satellite

2 satellites on 22 kHz switchbox

2 satellites on toneburst switch

Max. 4 satellites on DiSEqC multiswitch

DiSEqC one cable communal system

Other communal installation

Select

satellite

installation

Single

satellite

Reception of a single satellite via a connected LNC (LNB).

2 satellites

on 22 kHz switchbox

Reception of two different satellites with two LNCs (LNBs) which are connected to the TV set by a 22 kHz switchbox.

2 satellites

on toneburst

switch

Reception of two different satellites with two LNCs (LNBs) which are connected to the TV set by a toneburst switch.

Max. 4

satellites

on DiSEqC

multiswitch

The TV set controls a DiSEqC multiswitch to which up to four LNCs (LNBs) for different satellites are connected.

DiSEqC

one cable

communal

system

Select setting if the TV set is connected to a DiSEqC single-cable system (according to EN 50494). Several Sat receivers can be connected to one Sat cable.

other communal installation

Select setting if the TV set is connected to a singlecable system (without DiSEqC). Several Sat receivers can be connected to one Sat cable. Contrary to a DiSEqC one cable communal system there are restrictions in the range of certain reception frequencies in "common" single-cable community systems.

 Proceed to next step (to the appropriate page of

the satellite system).

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for the satellite system (single satellite):

 Select satellite,

OK Confirm selection.

 Proceed to next step.

 Select Dual band (low/high) or Single band. Here you specify if you use a Dual Band (Univer-

sal) LNB or a Single LNB.

 Proceed to next step.

 Set LNB frequencies.

OK Adopt settings.

The setting of the LNB frequency is only called when you have used the setting Single band in step Dual / single band.

Normally, you do not need to change the values

for high and low band, unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display).

 Proceed to next step. Proceed with Setting options for DVB-S reception

(continued).

Optus D1160°E Türksat 42°E Hellas Sat2 39°E Eutelsat 36A 36°E Eutelsat 28A 28,5°E ASTRA2 28,2°E ASTRA3 23,5°E

Eutelsat 5 West A 5°W Nilesat 7°W Eutelsat 7 West A 7,2°W Eutelsat 8 West A 8°W Eutelsat 12 West A 12,5°W Telestart12 12,5°W Intelsat901 18°W

ASTRA1 19,2°E

Eutelsat 16A 16°E Hot Bird 13°E Eurobird 9A 9°E Eurobird 7A 7°E ASTRA4A 4,8°E Thor/Intelsat10-02 0,8

Select satellites

Please specify here which satellite you receive. Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

Select

single satellite

Here, please specify whether you are using a Dual Band (Universal) LNB or a Single Band LNB.

Dual/single band (ASTRA1 19,2°E)

Dual band (low/high) Single band

Back with Proceed with

Dual/single

band

Please specify the oscillator frequency for your LNB.

LNB frequencies

ASTRA1 19,2°E low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Back with Proceed with

LNC

frequencies

Setting options for the satellite system (2 satellites on 22 kHz switchbox / 2 satellites on toneburst switch):

 Mark Satellite 1 / Satellite 2,  select satellite.

OK Adopt settings.

 Proceed to next step.

 Set LNB frequencies. OK Adopt settings.

Normally, you do not need to change the values

unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display).

 Proceed to next step. Proceed with Setting options for DVB-S reception

(continued).

Thor/Intelsat10-02 0,8 Eutelsat 5 West A 5°W Nilesat 7°W Eutelsat 7 West A 7,2°W Eutelsat 8 West A 8°W Eutelsat 12 West A 12,5°W Telestart12 12,5°W

ASTRA3 23,5°E

ASTRA1 19,2°E

Eutelsat 16A 16°E Hot Bird 13°E Eurobird 9A 9°E Eurobird 7A 7°E ASTRA4A 4,8°E

Select satellites

Please select satellite 1 and satellite 2. Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

none Optus D1160°E Türksat 42°E Hellas Sat2 39°E Eutelsat 36A 36°E Eutelsat 28A 28,5°E ASTRA2 28,2°E

Satellit 1 Satellit 2

Satellite

selection

Please select the LNB frequency for the Low Band. High band frequency is autom. adjusted. Note: The newly selected parameter in each case must be confirmed with the button.

ASTRA1 19,2°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Hot Bird 13°E Low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

LNB frequencies

Back with Proceed with

LNB frequencies

Please select the LNB frequencies for High and Low Bands. Note: The newly selected parameter in each case must be confirmed with the button.

ASTRA1 19,2°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

ASTRA1 19,2°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Hot Bird 13°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Hot Bird 13°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Back with Proceed with

LNC

frequency

(22 kHz

Switch box)

LNC

frequencies

(Toneburst

switch)

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for the satellite system (max. 4 satellites on DiSEqC multiswitch):

 Select and adapt settings for the DiSEqC

multiswitch.

OK Adopt settings.

Repeat rate

The refresh rate determines how often a DiSEqC command is output. A refresh is only necessary with cascaded systems.

Control

voltage

The control voltage controls the switching of the polarisation level (horizontal/vertical) in non-DiSEqC capable components (e.g., control of single LNBs via DiSEqC multiswitch).

22kHz signal

The 22 kHz signal controls the switching between high and low band in the Band setting. The Position setting controls the selection of the satellites in nonDiSEqC capable components.

Toneburst

The Toneburst controls the selection of the satellites in non-DiSEqC but Toneburst capable components with the Position and Option settings.

 Proceed to next step.

 Mark Satellite 1 ... Satellite 4,  Select satellite.

OK Adopt settings.

 Proceed to next step.

With the refresh rate you determine how often a DiSEqC command is output. This is only necessary in a cascaded system. Your system provider will bei able to tell you more about this.

Settings DiSEqC multiple switch

Back with Proceed with

Repeat rate none 1 2

Control voltage 13 / 18V off on

22kHz signal Band Position off

Toneburst off Position Option

DiSEqC

multiple

switch

Thor/Intelsat10-02 0,8 Eutelsat 5 West A 5°W Nilesat 7°W Eutelsat 7 West A 7,2°W Eutelsat 8 West A 8°W Eutelsat 12 West A 12,5°W Telestart12 12,5°W

ASTRA3 23,5°E

ASTRA1 19,2°E

Eutelsat 16A 16°E Hot Bird 13°E Eurobird 9A 9°E Eurobird 7A 7°E ASTRA4A 4,8°E

Select satellites

Please select satellite 1 to satellite 4. Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

none Optus D1160°E Türksat 42°E Hellas Sat2 39°E Eutelsat 36A 36°E Eutelsat 28A 28,5°E ASTRA2 28,2°E

Satellit 1 Satellit 2 Satellit 3 Satellit 4

Satellite

selection

 Set LNB frequencies. Normally, you do not need to change the values. OK Adopt settings.

 Proceed to next step.

Proceed with Setting options for DVB-S reception (continued).

LNB frequencies

Please select the LNB frequencies for both High and Low Bands. Note: The newly selected parameter in each case must be confirmed with the button.

ASTRA1 19,2°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

ASTRA1 19,2°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Hot Bird 13°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Hot Bird 13°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Eutelsat W2 16°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Eutelsat W2 16°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Türksat 42°E low band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Türksat 42°E high band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Back with Proceed with

LNC

frequencies

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for the satellite system (DiSEqC one cable communal system):

 Select One channel or Two channels.

Here you specify if you use one or two transmis-

sion channels in your one cable communal system.

In case of two channels - as far as they are avail-

able in your system - different stations can be simultaneously viewed on the main picture and on PIP.

You get more information on your system from

your dealer.

 Proceed to next step.

Select DiSEqC single cable communal instal-

lation.

 Proceed to next step.

 Select satellites from list,

OK Confirm selection.

 Proceed to next step.

Number of

system

channel used

Number of system channel used

One channel Two channels

Do you wish to use one or two transmission channels in your single cable communal installation? With two channels - provided they are available to you from the installation - it is possible to watch different stations at the same time in the main screen and in the PIP.

Retour avec Continuer avec

Select DiSEqC single cable communal installation

Please enter here which DiSEqC single cable system you are using. The following setting parameters of your system are then adapted accordingly.

User defined DELTA SUM-918 KATHREIN EXR-501

DELTA SUM-514 DELTA SUM-928 KATHREIN EXR-551 DELTA SUM-516 DELTA MSU-50x KATHREIN EXR-552 DELTA SUM-518 DELTA MSU-90x/170x KATHREIN EXR-154

Back with Proceed with

DiSEqC

one cable communal installation

Thor/Intelsat10-02 0,8 Eutelsat 5 West A 5°W Nilesat 7°W Eutelsat 7 West A 7,2°W Eutelsat 8 West A 8°W Eutelsat 12 West A 12,5°W Telestart12 12,5°W

ASTRA3 23,5°E

ASTRA1 19,2°E

Eutelsat 16A 16°E Hot Bird 13°E Eurobird 9A 9°E Eurobird 7A 7°E ASTRA4A 4,8°E

Select satellites

Please specify here which satellite you receive. Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

none Optus D1160°E Türksat 42°E Hellas Sat2 39°E Eutelsat 36A 36°E Eutelsat 28A 28,5°E ASTRA2 28,2°E

Satellite

selection

 Set LNB frequencies. Normally, you do not need to change the

values unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display).

OK Adopt settings.

 Proceed to next step.

 Select and adjust settings for the DiSEqC

single cable communal installation.

OK Adopt settings.

Transmission

channel

Select the desired transmission channel.

Transmission

frequency

Select the corresponding transmission frequency.

PIN protection

If your system is designed for it, it is possible to protect your used transmission data from use by other subscribers with a PIN.

Define/

change PIN

Here you can determine and change the PIN for PIN protection. Only possible, when yes has been selected for PIN protection.

 Proceed to next step. Proceed with Setting options for DVB-S reception

(continued).

Please specify the oscillator frequency for the Low Band. High band frequency is auotm. adjusted Note: The newly selected parameter must be confirmed with the button.

LNB frequencies

ASTRA1 19,2°E low Band 9750 MHz 10000 MHz 10200 MHz 10600 MHz

ASTRA1 19,2°E high Band 10600 MHz 10750 MHz 11000 MHz 11250 MHz

Back with Proceed with

LNB

frequencies

Please log on to your DiSEqC single-cable system that is connected to the antenna input ANT SAT and specify the desired transmission channel and associated transmission frequency. Please also indicate whether your single-cable system has a broad frequency band instead of a division into high and low band. If your antenna system is designed for this, it is possible to protect your used transmission data from being used by other participants by having a PIN. Note: The newly selected parameter in each case must be confirmed with the button.

Transmission channel 1

2 3 4 5 6 7 8

Transmission frequency

1284 MHz 1400 MHz 1516 MHz 1632 MHz 1748 MHz

PIN protection Ja

Nein

Define/change PIN 000

Manual registration (for socket ANT SAT)

Back with Proceed with

Manual

registration

(for socket

ANT SAT)

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for the satellite system (other communal installation):

 Select satellite.

OK Confirm selection.

 Proceed to next step.

 Select and adapt settings.

LNC

frequency

Normally, you do not need to change the values for high and low band, unless the LNC (LNB) of your satellite system uses a different oscillator frequency (important for the frequency display).

Supply

voltage

If your set is connected to a single-cable system without external voltage supply, you can connect the antenna supply (13V or 18V / max. 500mA).

 Proceed to next step.

Continue with Setting options for all types of reception.

Optus D1160°E Türksat 42°E Hellas Sat2 39°E Eutelsat 36A 36°E Eutelsat 28A 28,5°E ASTRA2 28,2°E ASTRA3 23,5°E

Eutelsat 5 West A 5°W Nilesat 7°W Eutelsat 7 West A 7,2°W Eutelsat 8 West A 8°W Eutelsat 12 West A 12,5°W Telestart12 12,5°W Intelsat901 18°W

ASTRA1 19,2°E

Eutelsat 16A 16°E Hot Bird 13°E Eurobird 9A 9°E Eurobird 7A 7°E ASTRA4A 4,8°E Thor/Intelsat10-02 0,8

Select satellites

Please specify here which satellite you receive. Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

Select

single satellite

LNB frequency, supply voltage

ASTRA1 19,2°E 9750 MHz 10000 MHz 10200 MHz 10600 MHz

Supply voltage off 13V 18V

Please specify the oscillator frequency for your LNB. If your TV set is connected to a single cable system without an external power supply, you can connect the antenna supply (13 or 18V/max. 350mA) with „13V“ or „18V“.

Back with Proceed with

LNB

frequencies

Connect ID 40-55 DR+ User guide



Initial installation

Setting options for DVB-S reception (continued):

After you have made the previous settings, you should receive picture and sound of the selected satellites (only possible for Astra1 and HOTBIRD).

 Proceed to next step.

 Select and adapt settings.

If several satellites are received, the following settings must be made for every satellite. The type of settings available may differ depending on the selected satellite or network.

Scrambled

stations

You can state whether coded stations are to be searched for in the search/update.

Select yes to save all found scrambled stations. However, these stations can only be received in connection with a CA module and the appropriate Smart Card.

Handling of the CA module is described in chapter Extras, section CA module.

method

If you select Frequency search here, a search is performed for all receivable stations. With Network search, from all receivable networks all the stations are searched which are supplied by these networks.

Depending on the selected network, this step

might possibly be skipped.

Symbol rate

The symbol rate is specified by the satellite provider and normally does not need to be changed.

Logical Channel Number

In various countries, digital stations (DVB-S) are transmitted with a preset channel number per station, known as Logical Channel Numbers (LCN).

If you select yes here, these default channel slots will be used and the channels of the preferred signal source will be sorted as per LCN. The stations in the station list can no longer be shifted.

 Proceed to next step. Continue with Setting options for all types of

reception.

Test reception

You should now receive a picture and sound from the following satellite:

Astra1 19,2°E C/N Level

Otherwise, please adjust your antenna. If it is already correctly adjusted, please continue all the same, without receiving picture or sound for the moment.

Back with Proceed with

Settings

Please specify whether you want to search for scrambled stations too. Note: Scrambled stations can only be received with an integrated CA module and additional card.

Scrambled stations

Search method

Symbol rate

Accept Logical Channel Number

DVB-S settings (ASTRA1 19,2°E)

Back with Proceed with

yes

Network search

Frequency search

22000

yes

Connect ID 40-55 DR+ User guide



Initial installation

continued on the next page

Setting options for all types of reception:

 Select desired languages and alternative

languages for subtitles and audio for DVB programmes.

Set up audio commentary for the visually

impaired.

OK Confirm selection.

 Proceed to next step.

You will see a list of the selected settings. You can go back step by step with the key  to make any changes to the settings.

OK Start automatic search.

Now, the TV set searches for TV and radio stations. It searches successively for stations from the selected signal sources. The progress of search is shown by a progress bar.

In case of a repeated initial installation routine (via

Home view under Extras

Special functions)

all stored stations will be first deleted here.

The number of found TV stations is displayed.

 Proceed to next step.

The number of found radio stations is displayed.

 Proceed to next step.

You can preset the desired languages and reserve languages for subtitles and audio for DVB programmes here.

You may preset whether you would always like to hear a special tone for visually-impaired persons (if provided by the station), which describes the operation in more detail, with the aid of an audio commentary. In "System Settings -> Sound," you can set its volume in relation to the "normal" volume by means of the "Audio commentary volume."

Note: The newly selected parameter in each case must be confirmed with the button.

Subtitle and audio languages (DVB)

Subtitle (DVB) Audio (DVB) Audio commentary

Favoured language Alternative language

Back with Proceed with

German Italian Czech Hungarian S

Englisch Spanish Greek Finnish T French Dutch Polish Slovenian S

Subtitle and

audio

languages

(DVB only)

Your TV performs the following automatic search with the listed settings. If you wish to correct them, please scroll back.

Check search settings

Start automatic search Antenne Wizard Cancel

Back with

Location of TV set (UK) United Kingdom Signal source(s) Cable analogue, DVB-T, DVB-C, DVB-S Satellite system Single satellite Satellite(s) ASTRA1 19,2°E

Check

settings

The automatic station search and sort have been stopped.

1164 new TV station(s) has (have) been found.

Result TV

Proceed with

Info

station search

 Select Age-related lock. OK Confirm selection.

You can specify an age limit for your TV set here.

DVB broadcasts which have an appropriate age identification are locked and can only be watched after entering the access code.

In some countries, the yes/no option does not

exist for some channels, and a compulsory age check must be entered.

 Proceed to next step.

Depending on the selected network, this step may

be skipped.

 Select time / date. If no values or no correct values have been

entered for date and time, enter the correct values with the numerical keys here.

 Proceed to next step.

If you enter an age restriction here, all DVB programmers are locked which have an appropriate age code and can only be watched by entering the access code. Note: The newly selected parameter must be confirmed with the button.

Age-related lock

Proceed with

No age-related lock Special security level

Age-related

lock

Please enter the date and time if none has been entered or if they are incorrect.

Time and date

Date 14.09.2012

Time 17:45:00

Back with Proceed with

Time and

date

Connect ID 40-55 DR+ User guide



Initial installation

Select sound components. OK Confirm selection.

This selection indicates which sound components

you want to use to hear your TV sound. Depending on the selection, the sound component wizard starts with which you can make further settings.

The sound component wizard is described in

chapter System settings, section Connec- tions – Sound components and can also be started at any time beyond the initial installation.

 Proceed to next step.

Select option.

With the selection, specify whether you want to

configure the available network adaptor now.

Configure now: Make settings for network adap-

tor and proxy server (see chapter System

settings,section Multimedia / Network – Network settings).

Do not configure or configure later: Skip

network adaptor configuration.

 Proceed to next step.

Please specify here via which sound components you want to listen to your TV sound. If you select a "Speaker system", this must be connected to the DIGITAL AUDIO LINK socket on the back of the TV set (with an additional adapter if necessary). Note: The newly selected parameter must be confirmed with the button.

Back with Proceed with

Sound playback via ...

TV speakers

Speaker system

HiFi/AV amplifier

Soundprojector

HiFi/AV amplifier or TV speakers (switchable)

Soundprojector or TV speakers (switchable)

Sound

playback

via ...

Please specify if you wish to configure a network at this time. You can also perform this at a more convenient time later (via 'System settings->Multimedia->Netzworksettings>Networking').

Netzwork configuration

Configure now Do not configure or configure later

Back with Proceed with

Network

configuration

Select option.

When selecting Information on new software updates, your TV set checks at definite intervals whether a newer software than the one installed in the TV set is available in the Internet. A screen message appears when a new software update is found.

Back: Exit wizard. The initial installation wizard is complete.

TV set as a monitor

You can also use your TV set just as a monitor, i.e. if you only use it with a PC. The tuner in the TV set cannot be used in this mode.

 Select AV connection. The selected AV connection is shown when

switching the TV on.

 Proceed to next step.

Initial setup continues with the Time and date setup.

Software-Update

Back with Finish wizard with

You have the option of performing a software update via the Internet. Please specify whether the TV set is to automatically inform you about newly available software. In accordance with the local laws and regulations, we would like to point out that set numbers, the installation location of your TV set, previous updates and the current software version will be processed and stored by an IT system, if you wish to perform software updates via the Internet. This data ensures that we are always able to offer you an optimum service. All data is treated as confidential. Note: you can change this setting at any time by selecting the following options: "System Settings -> Control->Software update -> via Internet"."

Inform about new software Do not inform

Inform about

new software

Please specify which AV channel your TV set should switch on to.

Selection of Switch-on channel

HDMI 1

HDMI 2 HDMI 3 HDMI 4 PC IN AVS AV VIDEO SPDIF IN

Back with Proceed with

Connect ID 40-55 DR+ User guide



Home view

The Home view is the central overview page for all of your TV set‘s operating modes.

The list of options on the left of Home view gives you access to TV, Video, Audio/Radio, Photo and Web.

By means of Extras and System settings you have access to more functions and you can configure your TV set.

On the right side of the screen you find all your favourites (bookmarks) created in the different operating modes.

The number of selectable items varies depending on the TV equipment, network connection, available media/ media servers and connected appliances.

Call Home view

HOME: Call Home view.

 Select menu item / favourite, OK call.

Das Erste HD

ProSieben

Loewe channel

ZDF HD

VOX

Maxdome

RTL Television

Napster

arte HD

Aupeo

kabel eins

SAT.1

Extras

Web

Photo

Audio/Radio

Video

System settings

Description of the individual sections/functions:

TV: Here you call the TV mode of your TV set.

See chapter TV for further information.

Video: The item Video gives you access to videos

from local (USB, home network) and online sources.

See chapter Video for further information.

Audio/Radio: With item Audio/Radio you find music

files from your local server(s) and USB storage media and you access DVB and Internet radio.

See chapter Audio/Radio for further information.

Photo: Via menu item Photo you can view photos

from your local media on your TV screen. See chapter Photo for further information.

Web: Here you have access to multimedia content

in the Internet (MediaNet) as well as a highquality web browser.

See chapter Web for further information..

Extras: Extras contains additional functions and

setting (e.g., Timer list, CA module). See chapter Extras for further information.

System settings:

In menu item System settings you find the configuration menu of the TV set e.g., with setting for picture, sound, connections or sound components.

See chapter System settings for further information.

Activated operating mode

The respective activated operating mode will be indicated in the list of options by a small playback symbol in the lower right-hand corner of the Home symbol.

Examples:

TV mode activated.

Audio player (Audio mode) activated.

In the opened Home view, pressing again on the HOME key brings you back to the respective active operating mode.

Connect ID 40-55 DR+ User guide



Home view Favourites

Home - Favourites

You will find your favourites on the right of the individual operating modes. You can create favourites in the operating modes of the TV set. In this way you get a collection of your favourite music titles, your preferred stations and often visited Internet sites on a single overview page.

After an initial installation, TV stations, online links and radio stations will already be automatically created as favourites independent of the installation site of the TV set and of existing Internet links.

Creating favourites

In the operating modes of the TV set you can define the current object (station, music title, photo, etc.) as favourite by means of your remote control. The favourite will be added to Home view and placed at the end.

Create favourite.

If there are more favourites than can be shown on one page, this will be indicated by rectangular symbols in the upper right corner of Home view. Example:

Three pages with favourites exist. The first page of them is indicated.

Manage favourites

You can edit the existing favourites in Home view. Change the sequence of your favourites as you wish or delete favourites you do not need any more.

HOME: Call Home view.

 Mark the favourite to be changed.

MENU: Change favourite.

Move favourite or delete it (see below).

Moving favourites

 Move favourite to new position.

BACK: Finish procedure.

Deleting Favourites

TEXT: Delete selected favourite.

BACK: Finish procedure.

Das Erste HD

ProSieben

Loewe channel

ZDF HD

VOX

Maxdome

RTL Television

Napster

arte HD

Aupeo

kabel eins

SAT.1

Das Erste HD

ProSieben

Loewe channel

ZDF HD

VOX

Maxdome

RTL Television

Napster

arte HD

Aupeo

kabel eins

SAT.1

Das Erste HD

ProSieben

Loewe channel

ZDF HD

VOX

Maxdome

RTL Television

Napster

arte HD

Aupeo

kabel eins

SAT.1

ProSi

ebe

Extras

Web

Photo

Audio/Radio

Video

System settings

Move Delete End

Connect ID 40-55 DR+ User guide



TV Volume / Station

In TV mode that can be selected via the Home view, you can use the basic TV functions of your TV set. In TV mode you will have numerous functionalities at your disposal as, for instance EPG and, if offered by the station, HbbTV (hybrid broadcast broadband television). By means of the function list you may call additional options and settings all around TV operation.

Setting the volume

Switching sound off/on

Sound off. Sound on: Press key again or increase the volume

using V+.

Setting the volume

V+/V– Volume up/down.

The volume control bar will be displayed in the upper right corner.

The volume control bar can be deactivated in the

menu.

Select station

Select station with P+ / P–

P+/P– Station up/down.

The number and the name of the station along with the title of the programme and that of the next programme will be briefly shown. Also, the status display with time and programme-dependent symbols appears.

The symbols of the status display are described in

section Status display.

Select station using the numerical keys

1-digit stations

Press the numerical key a little bit longer: The channel will change immediately.

Or: Press the numerical key briefly, the station changes after 2 seconds (changes immediately in case up to 9 stations are stored).

2-digit and 3-digit stations

Press first (and second) numerical key briefly. Keep the last numerical key pressed a little bit longer:

The channel will change immediately.

Or: Press all the numerical keys and the channel changes two seconds after the last number was entered (with up to 99 or 999 saved channels it will change immediately).

4-digit stations

Press all four numerical keys briefly, the station changes immediately.

If you select an unoccupied station slot, the next

available station is switched to.

long

short short long

all short

Selecting a station out of the station list

In normal TV mode, without other displays:

OK call station list.

 Mark stations. OK The marked station will be called.

Length of the station list

There is a possibility to influence the amount of stations by using different station lists.

In normal TV mode, without other displays:

OK call station list.  Call overview of station lists.

 Mark the desired list.

The station list will be changed according to the available options. The list will be adopted auto

matically.

Move to the new selected list.

Explanations of the station lists:

The number and the names of the possible station lists depend on

the available signal sources (antennas, TV reception networks, etc.).

Astra LCN

Analog DVB-C

DVB-T

Only stations from the selected source / reception network are indicated in the station list.

AV list

Exclusively AV inputs are shown in the station list.

Personal list

Only stations of the selected personal list are indicated in the station list.

The name of the list may be changed.

Manage lists

Call up the station list editing menu. (System set-

tings

Stations p Station lists TV).

9 ZDF HD

20:15 - 21:45 Toskana

10 BR Nord HD

21:15 - 21:45

:15 - 23:

11 SAT.1

20:14 - 22:19

12 RTL Television

21:15 - 22:15 Dr. House

13 n-tv

21:10 - 22:00

14 ProSieben

ASTRA LCN

9 ZDF HD

20:15 - 21:45 Toskana

10 BR Nord HD

21:15 - 21:45

:15 - 23:

11 SAT.1

20:14 - 22:19

12 RTL Television

21:15 - 22:15 Dr. House

13 n-tv

21:10 - 22:00

14 ProSieben

ASTRA LCN

Analogue

DVB-C

DVB-T

AV list

Manage list

Personal list 1

Connect ID 40-55 DR+ User guide



TV Station

Selecting stations by means of the expanded station list

In normal TV mode, without other displays:

Press OK longer: Call expanded station list.

 Mark stations.  Scrolling in the station list is possible.

OK The marked station will be called.

Or: For numerical sorting: Input the channel number. The

marker will switch to the selected station. The marked station is shown as a thumbnail picture.

OK The marked station will be called.

For alphabetical sorting: Input the first letter. The first station for the specified letters is marked.

 Mark the station.

OK The marked station will be called.

Filter and sort options of the expanded station list

Using the on-screen buttons on the bottom line of the expanded station list you can filter and sort the station list by various combinations of options.

With open expanded station list:

Toogle between the expanded station list and the list of options on the bottom.

0..9 Numerical sorting of the station list.

A..Z Alphabetical sorting of the station list.

Searching This allows you to do targeted searches for stations.

The station name is to be entered via the on-screen keyboard. Entry is described in chapter General information on menu operation.

Station lists Select the station list, the stations of which are to be

displayed in the extended station list (e.g., Personal station list, ASTRA LCN, DVB-C).

All stations Here you can specify if All stations, only HD

stations, Locked stations, Scrambled stations,

Unscrambled stations, CI+ Protected stations, New found stations or stations No more to be found from the selected sources shall be indicated.

13 ZDF.kultur HD 14 ZDFinfokanal HD 15 SAT.1 HD 16 RTL HD 17 ProSieben HD 18 VOX HD 19 kabel eins HD 20 SUPER RTL HD 21 N24 HD 22 TELE5 HD 23 SPORT1 HD 24 NICK/CC HD

1 Das Erste HD

2 ZDF HD

3 BR Nord HD 4 SAT.1 5 RTL 6 n-tv 7 ProSieben 8 3sat HD 9 ARTE HD 10 EinsPlus 11 Eurosport 12 ZDF Neo HD

2 ZDF HD 21:00-21:45

Toskana

Expanded station list

A..Z < All stations >< ASTRA LCN >Search

Back

Selecting stations by personal lists

You can save your preferred stations in up to six personal lists (e.g., for several users). Each personal list can contain up to 99 stations.

Personal list existing. In normal TV mode, without other displays:

OK call station list.

 Open overview of station lists.

 Mark the desired personal list, The station list will be changed according to the

available options. The list will be adopted automatically.

Move to the new selected list.

 Mark the station.

OK The marked station will be called. Or:

Select station directly with numerical keys.

Explanation of the icons following station names:

Locked station

HDTV station

DVB-T station (digital terrestrial via antenna)

DVB-C station (digital via cable)

DVB-S station (digital via satellite)

Coded station

ASTRA LCN

9 ZDF HD

20:15 - 21:45 Toskana

10 BR Nord HD

21:15 - 21:45

:15 - 23:

11 SAT.1

20:14 - 22:19

12 RTL Television

21:15 - 22:15 Dr. House

13 n-tv

21:10 - 22:00

14 ProSieben

Personal list 1

AV list

Manage list

Connect ID 40-55 DR+ User guide



TV Status display

Status display

In normal TV mode, without other displays.

INFO: Show status display.

In the left upper corner you will see in the marked field the number and name of the station, the transmission time and (if available) the title of the current programme. The bar (if available) indicates the progress of the current programme. If information about the current programme is available, this can be called by pressing the INFO key again.

In another adjacent field to the right, the programme info of the following programme is displayed additionally for DVB stations.

The field in the upper right corner contains the time, the date and, depending on the DVB station and according to availability, various additional information which is represented by symbols (see column on the right).

A window with button descriptions is displayed in the bottom right corner. The automatic display of the button descriptions can be switched off (see chapter

System settings, section Control – On-screen displays.

The status bar is shown automatically every time you change channels.

The status bar is hidden automatically at the end of the display time.

If you want to hide the status bar manually before the display time ends, you can do this with the BACK key.

Explanations of the symbols in the status display:

General symbols:

Language/sound selection available

Subtitles available

Channel selection for multi-channel providers

3D programme

HDTV programme

HbbTV mode available from this station

Digital 2

10 ZDF HD

21:00 - 21:45 Toskana

21:45 - 22:00 heute-journal

21:30 18.07.2013

Timer list Menu options Station list Expanded station list Value-added service Last station Language / sound Timeshift Recording Key explanation

(2sec)

Explanations of the symbols in the status display (cont'd):

Transmitted audio signal:

Mono

Mono audio transmission analogue

Dual

channel

Dual channel sound transmission (Sound1/Sound2) analogue

1+1

Dual channel sound transmission (Sound1/Sound2) digital

Stereo

Stereo sound transmission analogue

6WHUHR$$&

Stereo sound transmission (HEAAC)

Stereo sound transmission digital (PCM)

'LJLWDO

Dolby digital sound transmission (DD)

'LJLWDO

Dolby digital sound transmission (DD+)

'LJLWDO$$&

Dolby digital AAC+ sound transmission (HEAAC)

dts

dts sound transmission

MPEG

MPEG sound transmission

۲

PLII

Dolby Pro Logic II sound transmission

۲

965HI

Dolby Virtual Speaker Reference display

۲

96:LGH

Dolby Virtual Speaker Wide

Transmitted audio channels:

DD / dts 1.0 / mono

DD / dts / MPEG 2.0

DD / dts 3.0

DD / dts 4.0

DD / dts 5.0

DD / dts 2.1

DD / dts 3.1

DD / dts 4.1

DD / dts 5.1

Selected listening mode:

܃

Play centre sound or mono (left/right)

܃

Play front sound (L/R stereo)

܃

Play front and centre sound

܃

Play front and surround sound

܃

Play front, surround and centre sound

܃6RXQG

projector

Playback of sound via sound projector

܃([WHUQDO

speakers

Playback of sound via speakers connected to an external amplifier

If the number of speakers appears in brackets, the

sound of missing speakers is transmitted by the existing speakers (virtually). The Dolby Virtual speaker (VS mode) developed by Dolby is activated for the virtual sound reproduction.

Connect ID 40-55 DR+ User guide



TV Function list / AV list

Function list

The function list contains settings and additional options. The individual list items will be briefly explained as follows:

The function list can be opened directly in TV mode or via the station

list. Depending on this, some list items may possibly not be available.

In TV mode: MENU: Call function list.

Or: OK Call station list,

call function list.

 Mark function,

OK call.

Explanations of the symbols in the function list:

Open Expanded station list.

Call EPG (Electronic Programme Guide) wizard.

Menu item is only displayed as long as the EPG wizard has

not yet been executed.

Call up Language / sound. The sound formats on offer and their designations depend on the programme being broadcast.

Menu item will only be indicated when other languages/

sound tracks are available.

Call up selection of Subtitles.

Menu item will only be indicated when subtitles are

available.

Open recording dialogue to programme a Recording.

Set Sound mode (number of speakers).

Call up Sound settings.

Call up and adjust Headphone volume.

Menu item will only be indicated when a headphone is

connected to the TV set.

Call up Picture settings.

Activate PIP (picture in picture).

Move picture vertically up/down.

Switch screen off.

The menu item is only shown when DVB radio or an AV

source is active.

9 ZDF HD

20:15 - 21:45 Toskana

Recording

Subtitles

Sound mode

Here you can display your "Electronic Programme Guide".

Explanations of the symbols in the function list (continued):

Add current station as Favourite to Home view.

Changes the Sorting between numerically and alphabetically.

Call up Edit station list. Delete stations, shift stations, restore deleted stations.

AV list

Selecting the AV source via the AV list

In normal TV mode, without other displays:

Open up the station list AV list.

 Select desired connection, OK switch over.

If the selected AV source provides a signal (picture), it should be visible now.

For the VIDEO selection the set switches to cable analog, channel E36. The TV set shows the signal of a signal source device via antenna.

Only playback of the audio signal from the AV source (screen is off)

To play only the sound of a connected media player (e.g. MP3 player), the AV sources can be selected so that the screen goes blank.

Switching off the screen reduces the power consumption of the

TV set.

Open up the station list AV list.

Select desired connection, OK press at least for two seconds.

Selecting the AV source via the station list

In normal TV mode, without other displays:

OK call station list.  Call overview of station lists.

 Mark AV list. The AV list will be displayed.

Move to the AV list.

Mark desired AV source,

OK switch to AV source.

2 HDMI 22 HDMI 2

1 HDMI 11 HDMI 1

3 HDMI 33 HDMI 3

4 HDMI 44 HDMI 4

5 PC IN5 PC IN

6 AVS

AV list

Note: If you press for at least two seconds to switch to the selected channel, the screen switches off and you will only hear the sound. With the button (green), you can switch the screen back on and off.

Connect ID 40-55 DR+ User guide



TV Electronic Programme Guide

Electronic Programme Guide – EPG

EPG stands for Electronic Programme Guide and provides you with on-screen programme details. With the system, as with a printed programme guide, you can learn about the current programme. In addition programmes can be sorted according to cer tain topics, memorised, and also recordings can be programmed.

If a personal list has been selected, only the programmes of stations

from the personal list are displayed in the programme list.

Starting and ending EPG

EPG: Switch EPG on / off.

EPG is only available for DVB stations. The first time you start EPG, a wizard will start that

guides you through the necessary presettings.

Depending on the number of stations selected for EPG,

it may take some time until the programme information is displayed.

EPG wizard

In this dialogue you decide, for which station EPG data should be collected and displayed. With the number of stations the time for nocturnal data acquisition will increase. We recommend, also for reasons of distinctness to select only those stations, which you receive regularly.

When the EPG is started for the first time:

 Continue in the wizard and call up the EPG Station

selection.

MENU: Switch between the station list and the

on-screen buttons in the bottom line.

Changing the station list:

 Mark station list in the bottom line, OK select desired station list.

Select station for EPG:

 Mark the the single station, OK Select / deselect station for EPG.

For display in the EPG, the selected stations are marked with a check mark

Or:  select Mark all.

OK All stations of the station list will be activated for EPG.

Or:  select mark only this one.

OK Only the marked station is activated for EPG.

Verbotene Liebe

10 ZDF HD

11 ARD HD

15 ProSieben

17 SPORT1

19 SIXX

13 VOX

14 Sat. 1

16 kabel eins

18 RTL2

Küstenwache

Die Simpsons

SOKO Wismar

Alles was zählt

Unter uns

push - das SAT.1 Magazin

Die Simpsons Galileo

17:46 18:00 19:00 20:00

Navy CIS

taff

X-Diaries

Köln 50667

mieten, kaufen, wohnen

Berlin - Tag & Nacht

Private Practice Grey‘s Anatomy Top Dog ModelEmergency Room

Brisant

All genresToday

Meaning of the colours in the EPG

The coloured labels indicate the genre of the respective programme. When filtering with genre selection in the header, the programmes of the selected genre will be highlighted.

Movies

News

Show

Sports

Child

Music

Arts

Social

Education

Hobby

Series

EPG operation

In the left column there is a list of stations of your currently active station list (e.g. DVB-C, personal list etc). With the on-screen buttons in the header of the EPG you can select the day of the programme preview and filter the programmes as to their genre.

INFO: short: call up detailed information. long: show key explanations.

 Scrolling in the station list.  Scrolling through the programmes.

Or:

P+/P– Scrolling in the station list page by page.

RECORD key:

Schedule the recording of the marked

programme for a time.

MENU: Go to header.

 Mark selection of date or genre.

OK Accept changes.

MENU: Move from date to genre or from genre to

station list.

Connect ID 40-55 DR+ User guide



TV Electronic Programme Guide

Calling additional information about the programmes

INFO: Call up detailed information.

If there is more information on the selected programme, it will be indicated here. You find further information on the indicated programme in the bottom line:

View

The menu item is only available when the selected

programme is on the air.

Watch selected TV programme.

Memorise

This menu item is only available when the selected

programme has not started yet.

Memorise the programme for later watching / listening.

For further information see column on the right.

Depending on the presetting the TV set will switch

on by itself when it is in standby.

Delete

memo

For programmes being memorised you can also delete the memo.

Timer list Call up the timer list.



(Recording)

Schedule the recording of the selected programme for a time (see column on the right).

(Favourite)

Schedule the recording of the selected programme for a time. Additionally, an entry to the Home favourites will be added.

Explanation of the symbols in the programme information:

Programme in 16:9 picture format

Programme in high picture definition (HDTV)

Programme with Dolby-Digital sound

Transmission of subtitles for hearing-impaired persons

Programme with Parental lock (see chapter System settings,section Control – Parental lock)

The symbols may also appear in combinations.

5 ProSieben 16:45 07.01.14 16:30-16:58 How I Met Your Mother

Eine Halloween-Party auf dem Dach seines Wohnhauses steht bevor, und auch dieses Jahr lässt sich Ted das Ereignis nicht entgehen. Doch eigentlich hofft er, ein Mädchen, das er vor vier Jahren dort getroffen hat, endlich wiederzusehen. Barney findet die Idee völlig dämlich und versucht, seinen Freund zu einer Party bei Victoria‘s Secret zu überreden. Ted gibt die Hoffnung nicht auf, doch dann taucht spät abends eine ganz andere Frau auf dem Dach auf und gesellt sich zu ihm ...

5 ProSieben

Detailed info

Back

View Timer list

Programme preview

 Mark desired station in the station list. OK press long: show preview.

In the top left window, the current programme of the selected station is displayed now.

Stations are only changed in the preview window.

When exiting EPG, the previous station is displayed.

Jumping to time or station

The marking must be in the station list.

Press the numerical key (0 through 9). The window Select Time/Station is shown.

 Select time or station, Enter numbers.

When entering a time, you always jump to the next

occurrence of the entered time (24-hour window). If the time is already passed today, the time entered will appear on the following day.

Always enter five digits for station presets, e.g.

00001 for preset 1 or 00134 for preset 134.

OK Activate jump.

Switching to the current broadcast

 Mark current broadcast. OK press briefly: switch to current broadcast.

The electronic programme guide will be closed.

Verbotene Liebe

10 ZDF HD

11 ARD HD

15 ProSieben

17 SPORT1

19 SIXX

13 VOX

14 Sat. 1

16 kabel eins

18 RTL2

Küstenwache

Die Simpsons

SOKO Wismar

Alles was zählt

Unter uns

push - das SAT.1 Magazin

Die Simpsons Galileo

17:46 18:00 19:00 20:00

Navy CIS

taff

X-Diaries

Köln 50667

mieten, kaufen, wohnen

Berlin - Tag & Nacht

Private Practice Grey‘s Anatomy Top Dog ModelEmergency Room

Brisant

All genresToday

Select time

22:00

?????

Connect ID 40-55 DR+ User guide



TV Electronic Programme Guide

Timer programming by means of EPG

You can programme timer recordings of TV programmes conveniently using the EPG.

Mark the desired broadcast.

RECORD key: Programme timer recording for the TV

programme.

Timer data dialogue is opened.

Check the timer data and update it if necessary.

See chapter Extras,section Timer for explanations of the setting options in the Timer data menu.

In the EPG a recording symbol is placed behind the title of the

programme.

Memorising a programme via the EPG

A programme that has not started yet can be memorised. For memorised programmes, the TV set will ask at the beginning of a programme if it should change the channel accordingly or switch on from the stand-by mode if this is activated in the System settings

Control p EPG menu.

Mark the desired programme. OK Call up detailed information.

 Mark Memorise, OK Memorise programme.

In the EPG a memorise symbol is placed behind the title of the

programme.

The memo of programmes can also be started via the timer list instructions (s

ee chapter Extras,section Timer

After a software update, it is likely that Memos of programmes are

deleted. After a software update, please check your timer list

(see

chapter Extras, section Timer – Timer list).

Verbotene Liebe

10 ZDF HD

11 ARD HD

15 ProSieben

17 SPORT1

19 SIXX

13 VOX

14 Sat. 1

16 kabel eins

18 RTL2

Küstenwache

Die Simpsons

SOKO Wismar

Alles was zählt

Unter uns

push - das SAT.1 Magazin

Die Simpsons Galileo

17:46 18:00 19:00 20:00

Navy CIS

taff

X-Diaries

Köln 50667

mieten, kaufen, wohnen

Berlin - Tag & Nacht

Private Practice Grey‘s Anatomy Top Dog ModelEmergency Room

Brisant

All genresToday

DR+

18:00 - 18:50 Verbotene Liebe

12 Das Erste

14.09.2012

18:00

18:50

Recorder

Programme

Station

Date

Beginning

End

Recording type

Timer data - Recording

Record station

Back

Data part 1 Data part 2

Once only Mon-Fri Daily Weekly

Adapting the EPG Overview

The options to be selected are in the header,

if not, press MENU key.

Select day or genre. OKConfirm selection.

Example If you look for the next newscast select and news under

genre. Newscasts will be highlighted.

PIP: PIP: Switch in EPG view between standard and

compact view.

Configuring EPG You can find the EPG settings in the chapter System settings,section

Control – EPG).

18:00 - 18:50 Verbotene Liebe

10 ZDF HD

11 RTL Television

12 Das Erste HD12Das Erste HD

13 SAT.1 Bayern

14 ProSieben14ProSieben

19:25 - 20:15 Küstenwache

17:58 - 18:29 Die Simpsons

16:55 - 17:55 taff

18:00 - 18:50 SOKO Wismar

19:05 - 19:40 Alles was zählt

17:30 - 18:00 Unter uns

19:15 - 19:59 push - das SAT.1 Magazin

18:29 - 18:58 Die Simpsons

18:58 - 20:14 Galileo

19:00 - 20:0018:00 - 19:0017:00 - 18:00

17:15 - 18:00 Brisant

17:46 18:00 19:00 20:00

Today

News

Connect ID 40-55 DR+ User guide



TV Teletext

Teletext

Your TV set supports the two operating systems TOP text and FLOF. Up to 1,000 / 2,000 pages

are stored so that you have quick access.

Starting and ending Teletext

TEXT: Call teletext.

The function of the TEXT key can be set. The factory default is Standard teletext first.

TEXT: Switching between Standard Teletext and

MediaText.

Pressing the BACK key ends Teletext.

Key functions for Standard Teletext operation

0 AV: Stop self changing pages.

9: Zoom in the page (press several times).

: Add active Teletext page to Home favourites.

Page selection with the coloured keys

Red key: One page back or back to previous page

(depending on Teletext provider).

Green key: advance one page. Yellow key: To next topic. Blue key: To next range of topics.

The coloured bars (near TOP) or the coloured writing (near FLOF) in the last to bottom line show you which colour button you need to use to select which topic areas and topics.

Page selection with P+/P–

P+ call next Teletext page. P– call previous Teletext page.

Tagesschau.... 101 Kultur........ 400

Wirtschaft.... 170 Wissen........ 500

Sport..... 200/600 Ratgeber...... 530

Programm...... 300 Inhalt (A-Z).. 790

Syrien: Botschafter läuft über .. 107

EuGH hebt Saatgut-Verbot auf .... 121

Bundeswehr:Feldpostaffäre beendet 112

Neun Tote bei Lawinenunglück ..... 142

Live: Ticker, 11.Etappe der Tour. 666 Galatasaray will Hamit Altintop.. 211 NBA: Kaman spielt mit Nowitzki... 220

100 100 ARDtext Do 12.07.12 14:12:42

ARD Text

– +

Wirtschaft Nachrichten

14:00 Tagesschau

14:10 ARD-Mittagsmagazin ..... 312

15:00 Tagesschau

Das Erste

Back

Additional page selection possibilities

First possibility: INFO: Call overview page 100.

Second possibility:

Directly enter the page number.

Third possibility:

The page includes 3-digit page numbers.

Mark desired page number.

OK Call page.

Fourth possibility:

The page consists of several sub-pages, indicated by

the symbol

and the arrows in the bottom line.

 Go to bottom line.

 Mark

or ,

OK select previous / next sub-page.

The number of the current sub-page is shown

between the arrows.

Explanation of the symbols in the Teletext bottom line

Symbol (icon)

Remote control key

Description

– For Teletext pages with sub-pages:

Show previous sub-page.

– For Teletext pages with sub-pages:

Show next sub-page.

– Hide TV picture (Teletext as full screen).

– Insert TV picture (Split screen Teletext/

TV Picture).

– Activate Newsflash mode.

– Show hidden information on the Teletext

page.

– Hide information on the Teletext

page again.

Add current Teletext page to the favourites in Home view.

Call function list with Teletext settings.

Tagesschau.... 101 Kultur........ 400

Wirtschaft.... 170 Wissen........ 500

Sport..... 200/600 Ratgeber...... 530

Programm...... 300 Inhalt (A-Z).. 790

Syrien: Botschafter läuft über .. 107

EuGH hebt Saatgut-Verbot auf .... 121

Bundeswehr:Feldpostaffäre beendet 112

Neun Tote bei Lawinenunglück ..... 142

Live: Ticker, 11.Etappe der Tour. 666 Galatasaray will Hamit Altintop.. 211 NBA: Kaman spielt mit Nowitzki... 220

100 100 ARDtext Do 12.07.12 14:12:42

ARD Text

– +

Wirtschaft Nachrichten

14:00 Tagesschau

14:10 ARD-Mittagsmagazin ..... 312

15:00 Tagesschau

Das Erste

Back

Depending on the type of TV set (see chapter Technical Data).

Connect ID 40-55 DR+ User guide



TV Teletext

Newsflash

Some text pages, e.g., live tickers, will be permanently updated. In order to keep track of changes and also to be able to watch the TV programme at the same time you may hide the Teletext temporarily and can still remain informed on updates of the page.

 Mark

Newsflash,

confirm with OK.

The future behaviour of the News function depends on the type of the Teletext page:

In case of Full screen Teletext pages the Teletext will be hidden. In the upper left corner, there will be a symbol for the activated news function. A screen message appears when the contents of the page has changed:

Show updated page,  yes or no. OK Confirm selection.

In case of Teletext pages which cover only a part of the Teletext page, e.g., News tickers, the respective part will be faded in and permanently updated.

End News function

OK show Teletext again.

Or: BACK: exit Teletext.

Connect ID 40-55 DR+ User guide

Depending on the settings selected.



TV HbbTV / MediaText

HbbTV / MediaText

HbbTV

(Hybrid broadcast broadband television) offers the user comprehensive multimedia contents, e.g., media centres or additional information on the current programme as far as they are provided by the station.

MediaText helps you to use the next generation of teletext/videotext for HbbTV. MediaText/HbbTV text can either be started directly or through an HbbTV application.

The TV must be connected to the Internet to use HbbTV/MediaText.

A connection speed of at least 6,000 kbit/s (DSL 6000 or equivalent) is recommended for smooth playback of videos.

Open HbbTV application

If an HbbTV application is available for the chosen channel after changing channels, this will be loaded during the automatic start process and a red key symbol will appear. When starting manually, the application will only be loaded by pressing the red key.

HbbTV is offered by the selected channel. Connection to the Internet established. HbbTV mode is set to on.

Red key: Load / display HbbTV application.

The appearance, key assignment and available functions of the HbbTV applications are dependent on the provider. Under certain circumstances, the recording and bookmarking functions of the applications may not be supported. Loewe do not guarantee the accessibility, functionality or content of HbbTV applications.

Hide / Close HbbTV application

BACK: Hide / Close HbbTV application.

Depending on the start behaviour set, the HbbTV application will be hidden (automatically) or closed (manually). In the start behaviour Automatic, you need to press the BACK key a second time for closure. You will see a screen message after closing.

Open HbbTV text directly

Depending on the programme provider, the direct

Call of MediaText may not be possible. MediaText must then be opened by means of the HbbTV application.

MediaText/HbbTV text is offered by the selected

channel.

Connection to the Internet established.

TEXT: Call up “standard” Teletext (see chapter TV,

section Teletext).

By pressing the TEXT key a second time the Media- Text/HbbTV-Text will be called up.

The function of the TEXT key can be set.

Navigation within the HbbTV text and how the coloured buttons are assigned can vary depending on the provider.

Exiting HbbTV-Text

Pressing the BACK key ends HbbTV text.

Connect ID 40-55 DR+ User guide



TV Picture in Picture (PIP)

Picture in Picture (PIP)

The concurrent display of two different images is referred to as Picture in Picture.

The size of the PIP display can be changed in the system settings (see chapter System settings, section Control – PIP).

Simultaneous display of...

z (yes) / – (no)

a digitally broadcast channel (DVB-T/C/S) and picture from an AV source (e.g., AV, HDMI1)

a channel via digital satellite (DVB-S) and a channel via analogue cable television

a digitally broadcast channel DVB-T/C and a channel over analogue cable television

a digitally broadcast channel over DVB-T/C and a satellite broadcaster (DVB-S)

two channels over analogue cable television

–

two digitally broadcast channels (DVB-T/C/S)

a free-to-air and an encrypted digitally broadcast channel (DVB-T/C/S)

two encrypted channels

an SDTV channel and an HDTV channel (DVBC/S)

two HDTV channels (DVB-C/S)

Picture change and station selection are restricted during recording.

Starting and ending PIP mode

PIP: Show/hide PIP display.

The frame is green, if not, press the green button

The frame is green, if not, press green key.

Select the station as usual.

Select the station for the main picture

The frame is white,

if not, press green key.

Select the station as usual.

Coloured button functions

The frame is green, if not, press green key.

Yellow key: Swaps contents of TV picture and PIP

picture.

Blue key: Start/stop PIP scan in the PIP picture.

Connect ID 40-55 DR+ User guide

possible

–

not possible



TV Digital Recorder

Digital-Recorder – Overview of functions

You can record programmes on the integrated hard disk of your TV set with the digital recorder of your Loewe TV set. The various ways in which your Digital Recorder can be used are listed below.

Digital Recorder function Digital Recorder DR+

Delay TV in live play mode (timeshift)

Archive recording on the integrated hard disk

Archive recording on the USB storage device (external hard disk)

–

Recording / Time delay with digital stations (DVB-C/-T/-S)

Recording / Time delay with analogue stations

–

View other channels whilst the archive recording is taking place

Subsequent archive recording

Delay TV when archive recording is running

View other channels with delay TV whilst the archive recording is taking place

Archive playback from DR+

Archive playback from USB storage devices (external hard disk)

Copy recorded programmes from DR+ onto a USB storage device

Copy recorded programmes onto an external recorder

–

Copy recorded programmes from one USB storage device to another

Permit recorded programmes to be viewed on the network

View programmes that have been permitted to be viewed over the network

Set/delete manual bookmarks

Hide parts of a recording

Start up „Follow me“

Continue to view „follow me“ once it has started

Connect ID 40-55 DR+ User guide



TV Digital Recorder

TV viewing with time shift

The TV broadcast that you watch is automatically recorded in the background. You can stop the TV programme at any time and continue watching it later with a time shift. The maximum time shift is three hours.

Recording of analogue stations is not possible. During time-shift operation, the output signal for external devices

at the AV connection is switched off.

Time-shifted operation is perhaps not possible or only to a limited

extent for programmes of stations working with CI Plus encryption.

Interrupt watching (start timeshift television)

Press PAUSE key.

The TV image becomes a freeze frame and the DR status display appears. At the top you will see the number and name of the station if EPG or Teletext data is available, in addition to the start and end of the current programme and the title of the programme. In the lower part of the screen you find the starting time of the background recording left of the time bar. On the right hand side of the bar you can see the time at which the time shift recorder will be full (automatically extends by 30 minutes, up to a max. 3 hours). The time above the bar at the PAUSE key shows the current time.

Continue (time shift viewing)

Press PLAY key.

You can now continue watching the TV programme at the time when you had pressed the PA USE key. The Playback symbol  appears instead of the Pause symbol.

For further options of time-shift watching see chapter Video, section Video playback.

Digital 2

20:47 21.01.2013

20:10 20:40 21:10

2 ZDF 20:15 - 21:45 Rundreise Gardasee

Time shift 07:03 min

Back

Digital 2

20:47 21.01.2013

20:10 20:40 21:10

2 ZDF 20:15 - 21:45 Rundreise Gardasee

Time shift 07:03 min

Back

Returning to live picture (end timeshift television)

Press STOP key. You see the station’s live picture again.

Switch to a different station

If you switch the channel, the time-delayed recording (time shift) is restarted. The current time-delayed recording is discarded (time shift buffer is emptied). When switching between encrypted and unencrypted contents of the same station the timeshift buffer is also cleared. When doing this, the timeshift television is interrupted and you see the live picture of the broadcast. As a precaution, start archive recording of interesting broadcasts when watching stations with changing coding.

Setting bookmarks

You can manually set bookmarks during time-shift TV watching. For this, the time shift recording is converted into an archive recording.

Connect ID 40-55 DR+ User guide



TV Digital Recorder

Archive recording

Recording of analogue stations is not possible. Recordings of CI Plus encrypted programmes are perhaps not

possible or only to a limited extent.

Films that you wish to watch at a later date can be recorded in the Digital Recorder Archive (DR+ archive).

If EPG or teletext data is available, the Digital Recorder stores the title and additional information on each programme in the archive.

If additional languages are being transmitted for a DVB broadcast, these are also recorded. DVB subtitles subtitles can also be recorded. Language selection and subtitles are displayed as in TV mode.

You can watch another programme or playback a recorded TV programme from the archive while recording a TV programme into the archive. You can also play back the programme that you are just recording or any other programme with time delay.

During the archive recording, the bar showing the recording progress is red.

Direct Recording and One Touch Recording

Record interesting programmes directly into the DR+ archive by pressing the RECORD key. When watching time-shift broadcasts the current broadcast can be saved to the DR+ archive.

Subsequent archive recording

You can also save an already viewed and finished broadcast in the archive provided there has been no change of station in between. Skip or wind back to the desired broadcast and start the recording.

Time shift viewing with archive recording

Whilst an archive recording is taking place you can play back the programme that is being recorded or watch a programme on another channel using time delay. For further options of time-shift watching see chapter Video, section

Video playback.

Direct recording

Press the RECORD key for a short period: Start direct recording.

Recording dialogue for the current broadcast is called.

 Select recording time, OK proceed.

Check timer data and correct if necessary.

OK Start recording.

One Touch Recording

With One Touch Recording, the recording starts immediately at the press of a button.

Press RECORD key longer: Start One Touch Recording.

 Select recording time,

confirm with OK.

Check timer data and correct if necessary.

OK Adopt broadcast in timer data.

Additional information on direct recording and one touch recording

If the broadcast was watched right from its start, it will be saved from

the beginning in the DR+ archive. Otherwise, recording begins at the point from which viewing of the broadcast began.

Timer-controlled recording

Comfortably select your favourite programme for recording from the EPG. The timer overview has room for 50 entries.

You will find further information on timer-recording in chapter Extras, section Timer.

Connect ID 40-55 DR+ User guide



TV Digital Recorder

Setting bookmarks during archive recording

During a running archive recording you can create bookmarks (by pressing the PLAY key a little longer). You will see a message on the screen.

Bookmarks also serve as starting and end points of intervals.

Time shift viewing during archive recording

PAUSE key: Switch to freeze picture.

The recording is continued in the background.

Display during time-shift viewing and archive recording:

PLAY key: Continue playback. You will now see the time-shift archive recording.

For further options of time-shift watching see chapter

Video, section Video playback.

STOP key: End time shift and return to the live picture

of the current archive recording.

Watching other stations during archive recording

After you have started the recording, you can switch to another station.

The second channel can be watched in time-shift TV whilst a re-

cording is taking place (Timeshift during archive recording).

Digital 2

21:09 21.01.2013

2 ZDF 20:15 - 21:45 Rundreise Gardasee

20:15 21:04 21:50Time shift

05:00 min

Back

Viewing another programme from the archive during archive recording

After you have started the recording, you can also watch a programme you have already recorded.

Open the DR+ archive.

Mark the recorded programme, OK view programme.

The recording process is continued in the background.

Switching off the TV set during recording

You can switch off the TV to standby whilst recording. The recording is continued in the standby mode.

Never switch the TV set off at the mains and do not pull out the

plug of the TV set out of the socket. Otherwise the recording will be lost!

Subtitles

Subtitles of a broadcast can also be stored during recording.

The recording of subtitles in DR+ continuous mode must be acti-

vated in the settings.

Calling up the subtitles during a later playback is similar to calling subtitles in TV mode.

Stop recording early

You can end a current archive recording prematurely.

Press STOP key.

A message appears in the right upper corner of the screen.

OK Stop recording.

The recording process is ended. The portion of the TV broadcast recorded up to this point is saved on the hard disk and can be played back via the DR+ archive.

You can also end a running recording by deleting the

corresponding timer entry in the timer overview.

Stop recordingStop recording

OkOk CancelCancel

Connect ID 40-55 DR+ User guide



TV Digital Recorder

DR+ archive

With the DR+ archive you have access to all the recorded programmes and start playback.

An automatic Delete Manager always ensures that there is sufficient recording space for new movies.

Open the DR+ archive

Open the DR+ archive.

 Select desired archive, OK Display archive entries.

PIP: switch in DR+ archive view between standard and

compact view.

Playing from the DR archive

 Mark the required archive entry, OK Start or continue replaying the selected archive

entry.

During the playback of DR+ archive entries, the out-

put signal for external devices at the AV connection is switched off.

Explanation of broadcast information

The progress bar in the upper part of the broadcast information shows you how much of the recording has already been watched. Further information on the recording, as far as available, can be called via the function list (see column on the right).

Archive entry with set parental lock

Archive entry with set Delete protection

Archive entry with active playback

...... Unsere Tierwelt

20:15 - 22:00

21.09.12 ZDF HD

Unsere Tierwelt

DR+

1/4

......

The Big Bang Theory 22.10.13 ProSieben

Volle Kanne Service täglich 14.09.13 ZDF HD 14.09.13 ZDF HD

Richterin Salesch 14.10.13 SAT.1 14.10.13 SAT.1

Rote Rosen (1597) 21.10.13 Das Erste HD 21.10.13 Das Erste HD

Sturm der Liebe (1850) 20.10.13 Das Erste HD 20.10.13 Das Erste HD

Morgenmagazin 10.10.13 Das Erste HD 10.10.13 Das Erste HD

Breaking Bad 16.10.13 AXN Action 16.10.13 AXN Action

Familien im Brennpunkt 13.09.13 RTL Television13.09.13 RTL Television

Blumen der Welt 17.09.12 Das Erste17.09.12 Das Erste

The Big Bang Theory 20:15 - 22:00

22.10.13 ProSieben

The Big Bang Thoery

DR+ 1/1

DR+ archive function list

The function list of the DR+ archive contains the individual function for its archive entries.

Mark the recorded broadcast.

MENU: call function list.

Detailed info Show detailed information on the marked archive

entry.

Sorting Sort archive entries in alphabetical (ascending A-Z

or descending Z-A) order or according to recording date (newest entries first).

Rename Change title of archive entry.

Delete Delete archive entry from hard disk and recover

disk space.

Copy/Move Copy / move the archive entry from an accessible TV

set to the built-in hard disk or from the built-in hard disk to an external hard disk. When moving, the recording will be deleted automatically from the source after it has been successfully copied.

Favourite Add archive entry to Home favourites.

See chapter Home view for further information.

Delete

protection

Activate or deactivate protection against automatic deletion by the Delete Manager.

Parental

lock

Protect recorded broadcast against unauthorised playback.

The menu item is only available when a access

code is defined in the parental lock (see chapter

System settings, section Control – Parental lock).

Repeat Play archive entry repeatedly (in a loop) when the

archive entry is replayed in the future.

Settings opens the video settings.

...

Detailed info

SortingSorting

RenameRename

DeleteDelete

Copy/MoveCopy/Move

FavouriteFavourite

Delete protection

Parentallock

Connect ID 40-55 DR+ User guide



TV Digital Recorder

Displaying detailed information on the recording

If detailed information exists on the recorded broadcast from the EPG, you can deplay it.

The desired entry in the DR+ archive is marked.

MENU: Call function list.

 Mark Detailed info, OK Display detailed information on the broadcast.

For the explanation of the symbols in the bottom line see chapter TV, section EPG.

Changing the title of an archive

The desired entry in the DR+ archive is marked.

MENU: Call function list.

 mark Rename, OK Call.

 Select characters, OK Move character to input line.

For further information on character input see chapter

General information on menu operation.

End input with Adopt. This saves the change permanently.

Or: BACK: Cancel renaming.

Die mehrteilige Dokumentation "Unsere Tierwelt" liefert Ihnen bisher nie gezeigte, unglaubliche Einblicke in die heimische Welt der Tiere.

Das Erste HD 20:15 - 22:00 Unsere Tierwelt Unsere Tierwelt

Detailed info

Back

View

......

Unsere Tierwelt|

.-/

abc

Rename

Back

Space Delete Cancel Adopt

(2 sec) on a letter with a triangle shows more letters

Deleting recordings from the archive

The desired entry in the DR+ archive is marked.

STOP key: Call delete dialogue.

Or:

MENU: Call function list.

Mark Delete, OK call.

OK Confirm deletion. The DR+ archive will be

displayed again.

Or:

 Select no, OK Cancel procedure and return to function list.

It may take some time to delete recordings from

external hard disks, depending on the length of the programme and recording quality. To ensure a correct deletion process, cancel the presence of the external hard disk via MediaHome, before unplugging it from the TV set. You will see a screen message as soon as the hard disc can be removed.

... Blumen der Welt (10)

19:00 - 19:45

19.09.12 Das Erste HD

Blumen der Welt (10)

DR+ 3/9

Connect ID 40-55 DR+ User guide



TV Digital Recorder

Copying/Moving your recordings

You should copy recordings that you want to save permanently on an external USB hard disk.

Copying recordings, which originate from a CI Plus encrypted

station, is perhaps not possible or only to a limited extent.

Copying recordings to an external hard disk

You can also copy/move recordings onto an external hard disk, and archive them or make them available to other Loewe LCD TV sets (even those without DR+).

The desired entry in the DR+ archive is marked.

MENU: Call function list.

 Mark Copy or Move, OK call.

Select target in Timer Data Dialogue. Select Copy or Move.

OK Start the procedure.

When moving, the recording will be deleted automatically from the

source after it has been successfully copied.

Copying to an external hard disk takes place in the background and

at a significantly higher speed. You see a screen message, when copying has finished.

The status of copying assignments in progress/pending can be

seen in the timer list.

The TV set must not be switched off with the mains switch during

the copying process!

...

Copy/Move

Timer data

Back

Target

Programme

EXTHDD

20.09.12 ZDF HD Unsere Tierwelt

USB2

Copy MoveCopy

Setting/cancelling delete protection

You can provide films with a delete protection to prevent an automatic deletion by the delete manager.

The desired entry in the DR+ archive is marked.

MENU: Call function list.

 Mark Delete protection, OK Call.

 Mark yes / no, OK Adoptsettings.

Delete manager

The Delete Manager always makes sure there is enough memory space on the hard disk for new recordings. If the capacity on the hard disk is nearly fully exhausted, the oldest recording(s) are automatically deleted in order to create space on the hard disc. Recordings which have been protected with a delete protection are not deleted by the Delete Manager. However, you can still delete these recordings manually. To avoid data loss, we recommend copying important recordings to an external USB hard disk. Delete the recordings from the Digital Recorder after copying.

Loewe are not liable for data loss from the Digital Recorder’s hard

disk.

...

Delete protection

yes

nono

Adopt with

Connect ID 40-55 DR+ User guide



TV Digital Recorder

Locking/unlocking a movie (Parental lock)

You can lock movies that your children are not permitted to view, for instance. Playback is then only possible after entering a PIN.

In order to activate the Parental lock, a code num-

ber (PIN) must have been defined beforehand (see chapter System settings, section Control – Parentol lock).

The desired entry in the DR+ archive is marked.

MENU: Call function list.

 Mark Parental lock, OK Call.

 Select Ye s / No, OKAdopt.

The titles of locked films in the DR+ archive will be

replaced by asterisks * when a parental lock is active and thus cannot be read anymore. The detailed information for the recording cannot be called up. The cover of the recording will be replaced by a picture of a lock. In addition, the entry will be labelled with the symbol

Viewing a locked movie

The desired locked entry in the DR+ archive is

marked.

When the access code of the parental lock has not been entered yet:

OK call entry of PIN.

Enter your PIN.

After the access code has been entered, the lock

of the archive entries will be temporarily released.

OK View film.

...

Parental lock

yes

nono

Adopt with

... DR+

1/4

Connect ID 40-55 DR+ User guide



TV Digital Recorder

DR+ Streaming

You can release your DR+ archive entries in order to view these on other Loewe TV sets linked to the network.

To use DR+ Streaming, at least two Loewe TV sets with MB180,

SL1xx or SL2xx chassis are required (at least one of which has DR+ integrated). The TV sets also need to be connected via a wireless connection (WLAN) or a cable connection (e.g. Ethernet, PowerLine).

DR+ Streaming must be enabled in the system settings.

Archive entries can only be provided or released in the network by

TV sets with integrated hard disks (DR+). Playback of released archive entries is possible on all TV sets with

MB180, SL1xx (with/without DR+) and SL2xx chassis linked to the network.

Functions that would require write access to a released device

(parental lock, delete protection, renaming, deleting an entry or bookmark, creating a bookmark, deleting/hiding par ts of a recording) are not available during playback of a DR+ archive entry via the network.

Playback of DR+ archive entry via the network

Open the DR+ archive.

 Select desired archive, OK Display archive entries.

 Mark the required archive entry, OK View archive entry.

......

Urlaubsziele

Natur pur

18.08.12 ZDF HD

Festungen, Burgen, Schlösser (5) 20:00 - 21:00

16.09.12 arte HD

Festungen, Burgen, Schlösser (5)

Remote TVBA

Follow me function

The Follow me function enables you to interrupt a current broadcast and to continue viewing at an alternative TV set from the point of interruption.

Share DR+ archive with other devices is activ. Also use other archives is activated at the target

TV set.

Press PAUSE key.

The TV image becomes a freeze frame and the DR status display appears.

 Activate Follow me

You will see a message on the screen. The archive recording starts in approximately 20

seconds without an entry. The TV set switches itself off after starting the recording. The broadcast is adopted into the DR archive.

The recording TV set will make the broadcast available to the network from now.

You can indicate the beginning of a Follow me

recording at the target TV sets in your network by a screen display.

Continue Follow me recording on the second TV set

Call on the TV set, where you want to view the broadcast, the DR archive of the recording TV set.

Open the DR+ archive.

 Select archive of the recording TV set,  Display archive entries.

 Mark Follow me recording,

OK View recording.

Digital 2

20:40 21.01.2013

20:10 20:40 21:10

2 ZDF 20:15 - 21:45 Rundreise Gardasee

Time shift 00:03 min

Back

Connect ID 40-55 DR+ User guide

The assignment of the AUDIO key can be changed. The description refers to the standard setting.

TV Media

General information on media reproduction

Home view gives you access to photos, videos and music from your personal storage media, e.g., from storage media connected via USB and from media servers in your home network to which your TV set is connected.

The item Web gives you access to an Internet browser and multimedia data from the Internet.

Please follow also the information below for the MediaNet Internet

functions which can be called under Web.

Connecting the TV set to your network

To receive media via media servers in your home network or via the Internet, you have to integrate your TV set in your home network. You can connect your TV set both with a wired connection (Ethernet, PowerLine) or via a wireless radio connection (WLAN). For wireless connections, the TV set has an internal WLAN antenna.

Your Loewe TV set supports the UPnP AV standard for data playback in the home network. You can find more detailed information on this in the chapter Glossary.

Help for configuration problems

Loewe cannot provide any support for PC hardware and software or network components owing to the diverse configuration options with home networks. Please contact the administrator of your home network and/or specialist dealer for support when setting up and for maintenance of network connections, storage media, media server software and network devices, e.g. routers.

MediaNet

If you wish to use MediaNet we recommend registering your TV set on our homepage.

www.loewe.tv/int/my-loewe (using the Register now option).

Simply follow the steps in the registration process. The MAC address of your TV set is required for the registration. You can find this in the TV set under Extras → Special functions → Integrated features → MAC address (TV).

Accessing your media

HOME: Call Home view.

3456 Mark desired function, OK call function.

Video: see chapter Video. Audio/Radio: see chapter Audio/Radio. Photo: see chapter Photo. Web: see chapter Web .

Playing music and videos, displaying images

The windows for playing music and videos and for displaying photos are comparable for all cases irrespective of the media source. The relevant players are therefore grouped together.

Exit media

HOME: Call Home view and select another function

(see above).

Or: Press TV or AUDIO key for TV and radio mode swap-

ping

Das Erste HD

ProSieben

Loewe channel

ZDF HD

VOX

Maxdome

RTL Television

Napster

arte HD

Aupeo

kabel eins

SAT.1

Extras

Web

Photo

Audio/Radio

Video

System settings

Connect ID 40-55 DR+ User guide

Video

The item Video gives you access to videos from local (USB, home network) and online sources. The individual subitems are described in detail in the following.

High definition movie material (HD movies) from format 720p

upwards (resolution 1280 x 720 or higher) should be played back via a wired connection. If there is a wireless connection, then technical limitations (e.g., fault liability, bandwidth limitations) can cause disruptions in the playback right up to a complete breakdown of the playback.

Calling video selection

HOME: Call Home view.

6 5 Mark Video, OK call list of video sources.

6 5 Mark function, OK call.

DR+ archive

Programmes that you have recorded onto the integrated hard disk using the Digital Recorder are compiled in the DR+ archive. Via the DR+ archive you can replay, edit or delete your recorded programmes.

For further information see in chapter TV, section

Digital Recorder – DR+ archive

MediaNet

Call MediaNet → Browse → Video.

USB USB storage media on the USB connections of

your TV set. The exact designation depends on the relevant storage medium.

WMP11 Examples with media servers in your home network.

The exact designation depends on the media server used.

Timer Call up the timer list (siehe chapter Extras,section

Timer – Timer list).

Please also observe the notes in chapter System

settings, section Control – Software update regarding USB sticks!

The media sources shown here depend on the

devices available/used.

MediaNet

WMP11

USB

DR+ archive

Timer

Video Function list

The video function list contains the individual functions for your videos.

MENU: Open function list.

The availability of the following items depends on the currently

marked object (data source, directory, file).

Unmount

Unmount USB data storage medium before removing it in order to prevent data loss.

Sorting Sort videos in alphabetical (ascending A-Z or descen-

ding Z-A) order, file size or date (newest entries first).

Favourite Add video to the Home favourites..

Settings opens the video settings.

6 5 Mark desired function, OK Confirm selection.

Selecting videos

6 5 Mark desired directory, OK open directory. Repeat procedure if necessary.

6 5 Mark desired video, OK Start or continue playback of the selected video

Video_2.avi

0.68 GB

Video_3.avi

1.03 GB

Video_4.avi

0.04 GB

Video_5.avi

0.29 GB

Video_6.avi

0.19 GB

Video_7.avi

0.74 GB

......

Sorting

Favourite

Settings

......

Video_2.avi

0.68 GB

Video_3.avi

1.03 GB

Video_4.avi

0.04 GB

Video_5.avi

0.29 GB

Video_6.avi

0.19 GB

Video_7.avi

0.74 GB

USB1

......

Source: USB1 Title: Video_1.avi Size: 0.47 GB

Connect ID 40-55 DR+ User guide



Video

Video playback

General information on video playback

The description of the following functions applies to the playback of videos from the DR+ archive as well as for videos from USB storage media or from media servers in the home network.

For playback of DR+ archive entries we have additional playback

and editing capabilities. The explanation of these functions you find in section Additional functions for DR+ archive playback.

During the playback of DR+ archive entries, the output signal for

external devices at the AV connection is switched off.

Video status display

The video status bar provides you with further options on the current playback.

 Show status bar.

BACK: Hide the status display again.

Description of the symbols in the status display for video playback

Symbol Remote

control key

Description

Call list view (select video).

–

For playback of videos from USB storage media or from the home network: Switch repetition (loop playback) of all titles of the current directory ON/OFF.

–

For playback of videos from USB storage media or from the home network: Switch ON/OFF repetition (loop playback) of the current title.

– Change picture format of the video

playback.

long

Only for playback from DR+ archive: Set bookmark manually. In case of time-shifted viewing the timeshifted recording will be converted into an archive recording.

11:27

hh:mm

Digital 2

00:00

38:42

45:00

21.01.2013

Back

DR+ archive : ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Symbol Remote

control key

Description

long

only for playback from DR+ archive:

Delete bookmark manually.

The function is only available when

a manually set bookmark is within five seconds around the playback position.

Only for playback from DR+ archive:

Skip to next bookmark.

only for playback from DR+ archive:

Skip to previous bookmark.

–

only in time-shift mode:

Start DR+ Follow me recording.

–

only for playback from DR+ archive:

Call dialogue for deleting bookmarks.

–

only for playback from DR+ archive:

Call interval functions.

only for playback from DR+ archive: Use current still image at title image in the DR+ archive.

–

For playback from DR+ archive: Activate / deactivate again the repetition of the currently played archive entry.

– Skip to desired position in the playback.

Add currently played video to the favourites in Home view.

Call detailed info on the current playback.

Call function list with video settings.

hh:mm

Connect ID 40-55 DR+ User guide



Video

Pause playback (freeze picture)

PAUSE key: Switch to freeze picture.

PLAY key: Continue playback.

Jump

By briefly pressing the  or  keys you can skip forwards and back- wards in the movie. The jump distance is adjustable.

Skip forwards.

Skip backwards.

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

34:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Skipping with Smart jump

The Smart jump function ensures that the jump width is halved each time the jump direction is changed or doubled after three jumps in the same direction (max. 8 minutes). This way you can quickly find a certain spot of the recording.

The settings for Smart jump you find in the System settings under Controlטmore ...טDR+טSmart jump.

For example, you are searching for the beginning of a broadcast that has already started:

Press  repeatedly quickly to jump back.

If you have jumped past the beginning of the programme, jump in the opposite direction:

Press . This jump in the opposite direction is only

carried out for half the jump distance. Jump forward using .

If you have jumped past the start of the programme:

 Jump back again. In the process, the jump

distance is cut in half again.

By halving the jump distance when changing direction again you can find your way to a specific position.

Jump by entering a time

You can jump to any position in the video by entering a time.

 Show status bar.

 mark hh:mm (Jump to ...).

Enter the desired time with the numerical keys.

OK Execute jump.

00:00

36:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

00:38

Back

DR+ Archiv: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Connect ID 40-55 DR+ User guide



Video

Wind

To search for desired scenes in movies you can fast forward and rewind at three different speeds. Sound is not audible during winding.

 or  press a little bit longer.

By each brief pressing of  or  the speed will increase until you switch back to the first speed. Available speeds: 2x, 5x, 10x.

In case of time-shift viewing, playback is auto-

matically activated when the end of the recording is reached. You are then about 10 seconds behind the live picture or when rewinding at the beginning of the time shift recording.

In case of Fast forward of archive entries, playback

will finish at the end of the recording. The DR+ archive is displayed again.

PLAY key: Continue playback.

In the case of Internet videos, please wait until these

are buffered in the memory. This can take a few seconds, depending on the bit rate of the film and Internet speed.

00:00

40:42

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

43:42

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Repeat

Videos can be repeated, i.e., replayed in an endless loop. Depending on the source (DR+ archive, USB storage medium, media server in the network), single or all videos can be replayed in an endless loop.

Repeated playback of DR+ archive entries

 Show status bar.

 mark Repeat

confirm with OK.

The current archive entry will be replayed repeatedly. The repetition setting remains active for this archive entry even when the playback is finished.

To deactivate playback again:  mark Repeat off

confirm with OK.

Repeating videos from USB storage media or media servers

 Show status bar.

 mark Repeat title

OK Switch the repetition of the individual video ON/

OFF.

The repeat setting remains until it will be deacti-

vated or another video is replayed.

Or:  mark Repeat all

OK Switch repetition of all titles of the current direc-

tory ON/OFF.

The repeat setting remains until it will be deacti-

vated or another directory in the overview is selected.

Repeat title and Repeat all cannot be activated simultaneously.

Using one of the two functions deactivates the respective other one.

Connect ID 40-55 DR+ User guide



Video

Slow motion

At an active pause (freeze frame) you can select from four slow motion speeds (for wind/rewind). There is no sound during slow motion replay. When viewing HDTV slow motion backwards is not possible.

PAUSE key: Switch to freeze picture.

Press  or  briefly.

Increase speed: Press  or  several times briefly.

The speed increases every time you press the button until eventually switching back to the initial speed.

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:44

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Select language/sound

Videos, especially those recorded from TV broadcasts, can contain several sound tracks. Select sound track/language:

 Show status bar.

 mark Settings

OK Call settings.

 mark Language/sound, OK call Language/Sound selection.

 mark desired sound or desired language, OK select sound track.

Changing the picture format

 Show status bar.

 Mark Change Picture format

OK set picture format.

You can choose between small or full image settings. Small image setting shows the video close to the

original resolution. The video status bar is permanently shown below the image.

The full image setting enlarges the image to fit the entire screen. The status bar can be set to visible or hidden.

Dolby Digital

2.0

Dolby Digital

2.0

Dolby Digital

5.1

Dolby Digital

5.1

Language / sound

stereo Adopt with

You can select other movie languages and other sound formats here.

Connect ID 40-55 DR+ User guide



Video

Additional functions for DR+ archive playback

There are additional editing and playback functions for playback of recorded programmes from the DR+ archive. These are explained as follows.

Setting bookmarks

To retrieve interesting scenes in a movie later, you can manually set the bookmarks. In addition, there are also automatically set bookmarks every time a broadcast is changed. You can jump to each of the bookmarks in succession by pressing a key.

In case of a running time-shift recording (timeshift television), this will be converted into an archive recording when a blank is set.

PLAY key (press a little bit longer): Set bookmark.

You will see a message on the screen. The drive display is then faded in and you will see the set bookmark above the bar for the playback.

Automatically set bookmarks are white. Manually

set bookmarks are blue.

Determine cover picture

The covers for the display of the entry in the DR+ archive can be freely determined by you during an archive replay:

Jump / wind to the desired position in the recording.

PAUSE key: Switch to freeze picture.

 mark Adopt as cover picture

OK confirm.

You will see a message on the screen. The image will be displayed next to the broadcast in the DR archive in future.

PLAY key: Resume play.

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Interval functions

The intervals between manually or automatically set bookmarks (intervals) can be faded out for future playbacks. In addition to that, unwanted intervals at the beginning or end of your recorded broadcast can be deleted.

An archive entry is replayed.

 Show status bar.

Move to the desired interval in the recorded broadcast by skipping or winding.

PAUSE: Stop play.

 Mark Interval functions

OK Call interval functions.

00:00

38:42

45:00

Back

Hide Delete to start Delete to endCancel

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

Back

Hide Delete to start Delete to endCancel

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Connect ID 40-55 DR+ User guide



Video

Hiding intervals

The Interval functions are activated.

mark Hide, OK hide current interval.

This interval will be skipped when the archive entry is replayed in the future.

Show hidden section again

System settings ט Control טmore ...טDR+

טNotify hidden sections ט yes must be selected

A screen message will appear when a hidden section is skipped during replay of a DR+ archive entry.

 Select yes, OK confirm.

During future replays, the hidden section is displayed again.

Deleting part of the recording

Press PAUSE key at such a position from which the recording shall be deleted up to the beginning or to the end.

Call Interval functions.

 mark Delete to start or Delete to end, confirm with OK.

 mark Confirm delete OK Delete part of recording.

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

Back

Hide Delete to start Delete to endCancel

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

hh:mm

Deleting intervals

Defined intervals will be deleted when you delete the corresponding bookmark at the beginning or the end of the interval.

Jumping to Bookmarks

 mark next bookmark

OK Jump to next bookmark.

 mark previous bookmark

OK Jump to next bookmark.

00:00

38:42

45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

23:51 45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Connect ID 40-55 DR+ User guide



Video

Deleting individual bookmarks

Jump to the manually set bookmark to be deleted.

Press PLAY key for a little bit longer : Delete bookmark.

Deleting the Bookmark during playback

You can delete your manually set bookmarks during the playback of the DR+ Archive entry.

Manually set bookmarks are blue, automatically set bookmarks are

displayed in grey. Automatically set bookmarks cannot be deleted.

PAUSE key: Switch to freeze picture.

 mark Delete bookmark

OK call delete dialogue.

Delete all

bookmarks

All manually set bookmarks (blue) in the current recording are deleted.

Delete

bookmark

←

The manually set bookmark to the left of the current position will be deleted.

Delete

bookmark

→

The manually set bookmark to the right of the current position will be deleted.

OKConfirm selection.

PLAY key: Continue playback.

00:00

23:51 45:00

hh:mm

Back

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

00:00

38:42

45:00

Back

Delete bookmark ← CancelDelete bookmark →Delete all bookmarks

DR+ archive: ZDFinfo HD 17:05 - 17:50 Flora und Fauna

Subtitles

Subtitles of a broadcast can also be stored during recording see chapter Extras, section Timer – Entering the Timer data.

Showing recorded subtitles during playback:

 Show status bar.

 mark Settings

OK Call settings.

 mark Subtitles, OK Call up available subtitles.

 Mark the desired subtitles, OK show/hide subtitles.

Subtitles off Adopt with

German

Here you can display the programme subtitles, if they are provided.

Connect ID 40-55 DR+ User guide

Audio/Radio

With item Audio/Radio you find music files from your local server(s) and USB storage media and you access DVB and Internet radio. The individual subitems are described in detail in the following.

Calling Audio selection

HOME: Call Home view.

6 5 Mark Audio/Radio, OK call list of audio sources.

6 5 Mark function, OK call.

DVB radio

The TV set can receive digital radio stations over DVB. For further information see chapter Audio/Radio,

section Radio mode (DVB radio).

Internet radio

The TV set can receive digital radio stations over the Internet.

For further information see chapter Audio/Radio, section Radio mode (Internet radio).

MediaNet

Call MediaNet → Browse → Music.

Media

Center

A Loewe media centre connected to your home network.

WMP11 Examples with media servers in your home network.

The exact designation depends on the media server used.

USB USB storage media on the USB connections of

your TV set. The exact designation depends on the relevant storage medium.

Please also observe the notes in chapter System

settings, section Control – Software update regarding USB sticks!

The media sources shown here depend on the

devices available/used.

MediaNet

MediaCenter

WMP11

USB

DVB radio

Internet radio

Audio/Radio Function list

The audio/radio function list contains the individual functions for your music titles.

MENU: Open function list.

The availability of the following items depends on the currently

marked object (data source, directory, file).

Unmount

Unmount USB data storage medium before removing it in order to prevent data loss.

Sorting Sort music titles in alphabetical (ascending A-Z or

descending Z-A) order, title number, file size or date (newest entries first).

Favourite Add music title to the Home favourites.

Settings opens the audio settings.

65 Mark desired function, OK Confirm selection.

Selecting music titles

6 5 Mark desired directory, OK open directory. Repeat procedure if necessary.

6 5 Mark desired music title, OK Start or continue playback of the selected

music title.

......

auch 01 Ist das noch Punkrock? 02 Bettmagnet 03 Sohn der Leere 04 TCR 05 Das darfst du 06 Tamagotchi 07 M&F 08 Freundschaft ist Kunst 09 Angekumpelt 10 Waldspaziergang mit Folgen 11 Fiasko 12 Miststück 13 Das finde ich gut 14 Cpt. Metal 15 Die Hard 16 zeiDverschwÄndung

03:00 03:07 03:42 03:44 03:20 03:06 04:16 03:22 02:34 03:27 02:44 03:39 02:27 04:36 02:20 02:59

Sorting

Favourite

Settings

auch

01 Ist das noch Punkrock? 02 Bettmagnet 03 Sohn der Leere 04 TCR 05 Das darfst du 06 Tamagotchi 07 M&F 08 Freundschaft ist Kunst 09 Angekumpelt 10 Waldspaziergang mit Folgen 11 Fiasko 12 Miststück 13 Das finde ich gut 14 Cpt. Metal 15 Die Hard 16 zeiDverschwÄndung

03:00 03:07 03:42 03:44 03:20 03:06 04:16 03:22 02:34 03:27 02:44 03:39 02:27 04:36 02:20 02:59

......

Connect ID 40-55 DR+ User guide



Audio/Radio

Audio playback

Description of the symbols in the status display for audio playback

Symbol Remote

control key

Description

Call list view (select music title / station).

–

Only for playback of music titles from USB storage media or from the home network: Switch repetition (loop playback) of all titles of the current directory ON/OFF.

–

Only for playback of music titles from USB storage media or from the home network: Switch ON/OFF repetition (loop playback) of the current title.

–

Only for playback of music titles from USB storage media or from the home network: Switch shuffle playback for the titles of the current directory ON/OFF.

Switch off the TV screen.

Add the current station / music title to the favourites in Home view.

In case of DVB radio: Show EPG detailed info on the current broadcast.

For playback of music titles from USB storage media or from the home network: Call detailed info on the played music titles.

Call function list with audio settings.

Chasing Cars Shut Your EyesHands Open

Snow Patrol / Eyes Open

00:00

02:56

04:27

Back

Pause playback

PAUSE key: Stop current playback.

PLAY key: Continue playback.

Wind

You can fast forward music titles at four different speeds. Sound is not audible during winding.

Press  a little bit longer.

With each brief pressing of  the speed will increase until you switch back to the first speed. Available speeds: 2x, 4x, 8x, 16x.

PLAY key: Continue playback.

Chasing Cars Shut Your EyesHands Open

00:00

02:56

04:27

Snow Patrol / Eyes Open

Back

Chasing Cars Shut Your EyesHands Open

00:00

02:56

04:27

Snow Patrol / Eyes Open

Back

Chasing Cars Shut Your EyesHands Open

00:00

04:10

Snow Patrol / Eyes Open

Back

Connect ID 40-55 DR+ User guide



Audio/Radio

Select another title / play current title from start

BACK: Call music selection. Select music title as described in chapter Audio/

Radio, section Selecting music titles.

Or:

Press P+ : Play next title of current album / directory.

Press P– : Play current title from start.

Press P– again: Play previous title of the current album / directory.

Or:

 Go to line with music titles,  scroll in music titles.

OK Start playback of the marked title.

Chasing Cars Shut Your EyesHands Open

Snow Patrol / Eyes Open

00:00

02:56

04:27

Back

Repeat

Music titles can be repeated, i.e., replayed in an endless loop.

 Show status bar.

 Mark Repeat title

OK Switch the repetition of the individual music title

ON/OFF.

The repeat setting remains until it will be deacti-

vated or another music title is replayed.

Or:  Mark Repeat all

OK Switch repetition of all music titles of the current

directory ON/OFF.

The repeat setting remains until it will be deacti-

vated or another directory in the overview is selected.

Repeat title and Repeat all cannot be activated simultaneously.

Using one of the two functions deactivates the respective other one.

Repeat and Shuffle (see below) cannot be activated at the same

time. Activating a repeat operation deactivates shuffle.

Shuffle playback

The music titles of your current medium are replayed in random order.

 Show status bar.

 Mark Shuffle playback

OK Switch shuffle playback of the titles in current

album / directory ON/OFF.

Repeat and Shuffle (see above) cannot be activated at the same

time. Activating the shuffle playback deactivates repeat.

Connect ID 40-55 DR+ User guide



Audio/Radio

Switching the screen ON/OFF

Green key: Switch screen OFF.

Or:

 Mark Screen off

OK Switch screen off.

Switching off the screen reduces the power

consumption of the TV set.

Switch on the screen with the remote control: Press green key.

Switch on the screen on the TV set:

Press R on the ring cursor on the TV set.

Ending playback

STOP key: End playback and return to music selec-

tion.

Chasing Cars Shut Your EyesHands Open

Snow Patrol / Eyes Open

00:00

02:56

04:27

Back

Connect ID 40-55 DR+ User guide



Audio/Radio

Radio mode (DVB radio)

The TV set can receive digital radio stations via DVB.

The AUDIO key has been preset for radio operation in the factory.

Radio mode on

AUDIO key on the remote control

Press R on the ring cursor on the TV set.

Or: HOME: Call Home view.

 Select Audio/Radio, OK call.

Select DVB radio, OK call.

You see the radio station list.

Select station, OK call.

Station switching

The radio mode is switched on and a radio station

has been selected (see above).

P+/P– or press the numerical keys on the remote

control.

Or:

OK call station list.

Select station,

OK call.

3 Bayern 3

2 ANTENNE BAYERN

4 Bayern 1

5 Radio Eins

6 hr1

7 hr2

...

ASTRA1 19,2°E

2 ANTENNE BAYERN

Setting the volume

V+/V– Volume up/down.

Other sound settings are the same as for the volume setting in TV mode (see chapter TV, section Setting

the volume).

Switching the screen on/off

Green key: Switch screen OFF.

Switching off the screen reduces the power

consumption of the TV set.

Switch on the screen with the remote control: Press green key.

Switch on the screen on the TV set:

Press R on the ring cursor on the TV set.

DVB radio function list

MENU: Call function list.

Or: OK call station list,

call function list.

 Mark function,

OK call. See chapter TV, section Function list for further infor-

mation.

Exit radio mode

AUDIO key or

press TV key on the remote control (TV mode is called).

Or: HOME: Call Home view.

 Select another operating mode, OK call.

Connect ID 40-55 DR+ User guide



Audio/Radio

Radio mode (Internet radio)

The TV set can receive digital radio stations via the Internet.

The names of the directories and stations in the Internet radio mode

are given by the provider vTuner. Changing the arrangement of stations or renaming them is not possible here.

Internet radio is only accessible if a connection to the Internet has

been established.

Radio mode on

HOME: Call Home view.

 Select Audio/Radio, OK call.

Select Internet radio, OK call.

You see the radio station list.

 Mark desired directory, OK open directory. Repeat procedure if necessary.

Select station, OK call.

For further information on the control of the Internet

radio see chapter Audio/Radio, section Audio

playback.

Station switching

BACK: call station list.

Select stations as described in the left column.

Or:

P+/P– Scroll through the current Internet radio direc-

tory to look for stations.

BuzzBuzz

by Genreby Genre

by Locationby Location

FavoritesFavorites

Local GermanyLocal Germany

New StationsNew Stations

Popular StationsPopular Stations

Recommended StationsRecommended Stations

Internet radio

Setting the volume

V+/V– Volume up/down.

Other sound settings are the same as for the volume setting in TV mode (see chapter TV, section Setting

the volume).

Switching the screen on/off

Green key: Switch screen OFF.

Or:

 Mark Screen off

OK Switch screen off.

Switching off the screen reduces the power

consumption of the TV set.

Switch on the screen with the remote control: Press green key.

Switch the screen on with the remote control:

Press R on the ring cursor on the TV set.

Internet radio function list

MENU: Call function list.

 Mark function, OK call.

See chapter TV, section Function list for further infor- mation.

Exit radio mode

Press TV key on the remote control (TV mode is called).

Or: HOME: Calling the Home view.

 Select another operating mode, OK call.

Internetradio -> Antenne Bayern Classic Rock Live

Antenne Bayern Classic Rock Live

Back

Connect ID 40-55 DR+ User guide

Photo

Via menu item Photo you can view photos from your local media and from online sources on your TV screen. The individual subitems are described in detail in the following.

Calling Photo selection

HOME: Call Home view.

6 5 Mark Photo, OK call list of photo sources.

6 5 Mark function, OK call.

MediaNet

Call MediaNet → Browse → Photo.

WMP11 Examples with media servers in your home network.

The exact designation depends on the media server used.

USB USB storage media on the USB connections of

your TV set. The exact designation depends on the relevant storage medium.

Please also observe the notes in chapter System

settings, section Control – Software update regarding USB sticks!

The media sources shown here depend on the

devices available/used.

MediaNet

WMP11

USB

Photo function list

The photo function list contains the individual functions for your photos.

MENU: Open function list.

The availability of the following items depends on the currently

marked object (data source, directory, file).

Unmount

Unmount USB data storage medium before removing it in order to prevent data loss.

Slide show Start slide show of the photos in the currently se-

lected directory. See chapter Photo, section Photo display for further information.

Sorting Sort photos in alphabetical (ascending A-Z or descen-

ding Z-A) order, file size or date (newest entries first).

Favourite Add music title to the Home favourites.

Photo You can apply frequently used picture settings here.

6 5 Mark desired function, OK Confirm selection.

Selecting a photo

6 5 Mark desired directory, OK open directory. Repeat procedure if necessary.

6 5 Mark desired photo, OK View photo zoomed to full screen.

Slide show

Favourite

Sorting

Photo

Rotate TV

......

Pictures

......

Source: USB1 Title: CRW_7266b Date: 19.07.2013 Size: 4036 KB

Connect ID 40-55 DR+ User guide



Photo

Photo display

Description of the symbols in the status display for photos

Symbol (icon)

Remote control key

Description

– Call list view (select photo).

– Rotate photo by 90 degrees to the left.

– Rotate photo by 90 degrees to the right.

Start slide show.

Pause current slide show.

short

Show previous photo.

short

Show next photo.

Add currently displayed photo to the favourites in Home view.

Call detailed info on the displayed photo.

Call function list with photo settings.

USB1 -> CRW_7266b

Back

Full-screen mode

A photo is marked.

OK View photo in full-screen mode.

Show previous / next picture.

Rotating the photo

 On-screen display of status bar.  Mark

or .

OK rotate photo by 90 degrees to the left/right.

Slide show

PLAY key: Start slide show.

PAUSE key: Pause slide show.

PLAY key: Continue paused slide show.

Photo in full-screen mode / exit slide show

STOP key: Full-screen mode / end slide show and

return to photo selection.

USB1 -> CRW_7266b

Back

USB1 -> CRW_7266b

Back

USB1 -> CRW_7268

Back

Connect ID 40-55 DR+ User guide



Web

Here you have access to multimedia content in the Internet (MediaNet) as well as a high-quality web browser.

Calling the Web selection

HOME: Call Home view.

 Mark We b , OK call Web.

 mark function, OK call.

MediaNet

Under the menu item MediaNet you will find a continually expanding platform for interactive TV applications from the Internet.

All applications are optimised for use on the TV.

Browser

Call Web browser of the TV set. For further information see chapter Web, section

Browser.

Thus you open the Web-APP Portal.

MediaNet

Browser

MediaNet

Call MediaNet

WEB: Call MediaNet

HOME: Call Home view.

 Select We b, OK call.

 Mark MediaNet,  call.

he upper portion of the MediaNet home screen contains new online content. The lower portion of the MediaNet home screen contains Recommendations given by Loewe.

The given content may change from time to time

without prior notice.

 Select Home, OK go to the right to choose the online content.

 Mark the desired online content, OK Display/play content.

The navigation within the various applications

depends on the provider.

Functions in the MediaNet home screen

Home

Moves to the right to choose the online content.

Browse

Under Browse you can list and call the online content by subjects.

Settings In the Settings for MediaNet you can select coun-

tries, for example, to take advantage of various services.

Imprint Providing the legally required information on the

parties responsible for the content.

Exit MediaNet

HOME: Call Home view and select another function.

New

Recommendations

MediaNet - Home

Home

Browse

Settings

Imprint

The assignment of these keys can be changed (see chapter System settings, section Control – Web key function).

Connect ID 40-55 DR+ User guide



Web

MediaNet – Browse

MediaNet-Browse is called.

Under the item Browse, you browse the full range of applications by topic.

Filtering applications

 Select the genre / topic, OK call applications of the genre.

 Select desired application, OK open application.

Change filter

 Go to column with genres / topics.

Select another genre / topic,

OK call applications of the selected genre.

Exit Browse

BACK: Return to the MediaNet home screen.

Or:

 Go to column with genres / topics.

 Select Back,

OK return to the MediaNet home screen.

All

MediaNet - Browse

All

Recommendations

Video

Photo

Service

Games

Entertainment

News

Back

Games

MediaNet - Browse

Games

Entertainment

News

Sport

Music

ervice

Define application as favourite

 Mark the desired application.

Add the marked application to the Home favourites.

The favourite will be added to Home view and placed at the end.

MediaNet – Settings

MediaNet settings are called.

Here, you can find setting options for MediaNet.

 Select the desired setting, OK call.

Country

Selection

Select countries from which you want to get infor-

mation on services (see below).

Imprint

Providing the legally required information on the

parties responsible for the content.

Country Selection

 Mark country, OK select / deselect country.

Applications from countries that are marked with a tick

here, are offered in MediaNet.

Exit Settings

BACK: Return to the MediaNet home screen.

Or:

 Go to column with settings.

 Select Back,

OK return to the MediaNet home screen.

MediaNet - Country Selection

Select Countries to display various services

Country Selection

Imprint

Back

Germany Belgium

Austria Netherland

Switzerland Luxemburg

France UK

Italy Denmark

Spain Sweden

Portugal Finland

Connect ID 40-55 DR+ User guide



Web

Browser

You can access Internet sites directly using the integrated Opera browser. The web browser can also be used without an Internet connection. Thus you can access local devices which provide a web interface (e.g. router, home control, home network server).

Calling the Web browser

HOME: Call Home view.

 Select We b, OK call.

Select Browser, OK call. Start page will be opened.

INFO: display browser status.

Explanation of the symbols in the browser status

Define current site as homepage.

Update the displayed Internet site.

100% Change zoom factor of the displayed site / browser.

Add displayed Web site to Home view (in the Favourites

area).

Navigating on Web sites

P+/P– Scroll page vertically.

 /  Scroll page horizontally.

 Select link or text input field,

OK open link or confirm text input.

For the entry of text, press the numerical key (0-9) repeatedly as with a mobile phone until the desired character appears. The available letters are printed on the individual numeric buttons.

BACK: Stop text entry and exit

entry box.

Entering a URL (Internet address)

Browser status is displayed.

 Mark the URL (Internet address) of the

indicated Internet site,

OK Open address entry box.

 Select required character, OK Adopt character.

In the event of letters with a triangular, additional

letters are displayed when pressing the OK button longer (2 sec).

Delete character to the left of the cursor.

.-/

The selection switches to special characters.

abc Switch between upper/lower case.

Space Enter blank space.

Delete Delete all characters.

Cancel Cancel input. The entry box will be closed and the

previous Internet site will be displayed again.

Adopt Adopt address and open new Internet site.

The characters may also be entered by the numer-

ical keys of the remote control (see left column).

Exit Browser

HOME: Call Home view and select another function.

.-/

ABC

http://www.loewe.de

.com .net . /.dewww.

Enter/change internet address

Back

Adopt Cancel

Delete Cancel AdoptSpace

(2 sec) on a letter with a triangle shows more letters

Connect ID 40-55 DR+ User guide



Extras

Extras contains additional functions and settings (e.g., Timer list, CA module settings).

Call Extras

HOME: Call Home view.

 Mark Extras, OK call Extras.

Explanation of the subitems of Extras

Timer Under the menu item Timer you find the timer list

as well as the timer services such as alarm clock or time-triggered switch-off of the TV set. For further information see column on the right.

Software Carry out software update.

See chapter System settings, section Control – Software for further information.

DR+

Streaming

Switch off the TV set to be in an advanced standby mode (server function). The access to your TV entries remains activated for a preset time. See chapter Extras, section DR+ Streaming for further information.

Energy

efficiency

Here you can determine how energy efficient your TV set shall be. See chapter System settings, section Control – Energy efficiency for further information.

CA module 1

[Name]

Make settings for your CA modules.

This menu item appears only it at least one CA

module is plugged in.

The exact designation of the menu item and avail-

able subitems depends on your CA module(s).

See chapter Extras, section CA module for further information.

Special

functions

Here, you find the equipment overview of your TV set and repeat the initial installation. Moreover, you reset the various settings to the factory settings here. See chapter Extras, section Special functions for further information.

Timer

Software

DR+ Streaming

This allows you to open a list which contains all the programmed timertasks.

Energy efficiency

CA module Viaccess

CA module AlphaCrypt

Special functions

Timer

Timer list

All programmed recordings, earmarked programmes and copy jobs are listed in the timer list.

You can also programme new recordings, earmark other programmes and copy pre-recorded programmes from the DR+ archive to an external USB hard disk by means of the timer list.

When you have programmed timer recordings, the TV set can only

be switched off to the standby mode. Never switch the TV set off at the mains and do not pull out the plug of the TV set out of the socket. Otherwise no timer recordings can be made.

After a software update, it is likely that Memos of programmes and Timer entrys are deleted. After a software update, please check your timer list.

Call Timer list

Long press: call up the timer list.

Create

newly

Create new timer instruction (recording, copy, memo).

Explanation of the symbols in the timer list:

Recording

Recording in progress

Marked programme

Repeated recording (daily, weekly or Mon-Fri)

Serial recording

24.09. 10:32 - 11:00 ProSieben How I Met Your Mother

24.09. 12:15 - 12:44 ProSieben Malcolm mittendrin

24.09. 20:15 - 21:15 RTL Television Wer wird Millionär?

25.09. 20:00 - 20:15 Das Erste HD Tagesschau

Timer

Add new

Timer list Timer Services

Mon

Back

>All entries

Connect ID 40-55 DR+ User guide



Extras Timer

New instruction: New recording

In the Timer list:

 Mark Create newly, OK call.

 Mark New recording, OK call. The function list for recording will be

opened.

 Mark the desired option,  proceed.

Manual

recording

Programme the recording manually. For further information see column on the right.

Current

programme

Record currently watched TV programme.

Menu item will only be indicated when EPG data

are available for the current station.

Following

programme

Record following programme.

Menu item will only be indicated when EPG data

are available for the current station.

Recording

via EPG

Programme recording of a programme via the electronic programme guide (EPG).

Open DR+

archive

opens the DR+ archive.

Recording

Current programme 9 ZDF HD 20:15 - 21:45 Toskana

20:15

Following programme 9 ZDF HD 21:45 - 22:10 heute journal

Recording via EPG

Manual recording

Open DR+ Archive

Thereby you can record the programme currently being watched.

New recording – Manual recording (current station)

In the Timer list, New recording is selected.

 Mark recording duration.

The selection of a recording duration programmes

always a recording of the currently viewed station. For Any station and time see below.

OK Call Timer data dialogue.

The selected recording duration is preset in the

timer data. Check timer data and correct them, if required. In case of a previous selection of ??? Min, enter definitely the recording duration.

Mark Adopt to Timer. OK Confirm timer data and adopt timer instruction.

Recording has been started.

New recording – Manual recording (other station)

Manual recording has been selected (see above).

 Mark Any station and time, OK Call Station selection.

 Mark desired station, OK Adopt station in timer data.

Check timer data and correct them, if required.

Mark Adopt to Timer. OK Confirm timer data and adopt timer instruction.

Connect ID 40-55 DR+ User guide



Extras Timer

New recording – Current programme

After calling the Current programme the timer data dialogue will be displayed. The current programme is preset in the timer data.

Check timer data and correct them, if required.

Mark Adopt to Timer. OK Confirm timer data and adopt timer instruction.

Recording has been started.

New recording – Following programme

After calling the Following programme the timer data dialogue will be displayed. The following programme of the current station is preset in the timer data.

Check timer data and correct them, if required.

Mark Adopt to Timer. OK Confirm timer data and adopt timer instruction.

New copy job

You should copy recordings that you want to save permanently on an external USB hard disk.

Copying recordings, which originate from a CI Plus encrypted station,

is perhaps not possible or only to a limited extent.

In the Timer list:

 Mark Create newly, OK call.

 Mark New copy, OK call.

The DR+ archive will be called. For further information on copying refer to chapter TV, section Digital-

Recorder.

New memo

You memorise interesting programmes, which have not started yet, using the electronic programme guide (EPG).

In the Timer list:

 Mark Create newly, OK call.

 Mark New memo, OK call.

EPG will be called. For fur ther information on Memorise refer to chapter TV, section Electronic Programme

Guide.

Record conflict

If you wish to programme a new recording which overlaps a timer recording already saved, the Recording conflict dialogue will open. Determine whether one or both recordings are to be made here.

If you decide for both, you have to state which of the two programmes is to be recorded fully.

BACK: Interrupt programming of the new recording.

Update timer data of the newly programmed recording.

Delete/change programmed timer instruction

Use this function in the timer list if you want to delete recordings already programmed, to end a running timer recording or to change a timer instruction.

The Timer list is displayed.

Mark desired timer instruction,

The text of a currently active timer instruction is red.

If you delete this timer instruction, the recording is stopped.

OK Change marked timer instruction. The timer instruction will be displayed.

Or:

STOP: Delete marked timer instruction.

OKConfirm delete. Timer instruction will be deleted.

24.09. 10:32 - 11:00 ProSieben How I Met Your Mother

24.09. 12:15 - 12:44 ProSieben Malcolm mittendrin

24.09. 20:15 - 21:15 RTL Television Wer wird Millionär?

25.09. 20:00 - 20:15 Das Erste HD Tagesschau

Timer

Timer list Timer Services

Mon

Back

>All entries

Add new

Change with Delete with

Connect ID 40-55 DR+ User guide



Extras Timer

only available if EPG data exists.

Entering the Timer data

After selecting the station you wish to record, timer data will be displayed.

The setting options for the timer data differ depending on the recorder selection, whether an analogue or DVB station is to be recorded or via which route (EPG, manually) the recording has been programmed.

 Update timer data, if required, or press OK for confirmation.

If an external DVD recorder was selected as recording source, start

replay at the connected device manually from the beginning of the entered recording time.

Please also read the instructions in chapter Extras, section CA-

Modul concerning the recording of encoded programmes.

Explanations of the setting options in the menu Timer datapart1 – Standard settings

Station

(only available when the selected station can be received via different signal sources, e.g. DVB-T and DVB-S) Select the signal source for the recording.

Date

Day of recording.

Beginning

Starting time of the recording.

End

End time of the recording.

Recording

type

Programmes can be recorded in different ways: Once only: The programme will be recorded at the

specified time. Mon-Fri: The programme will always be recorded

from Monday to Friday at the specified time. Daily: The programme will be recorded every day at

the specified time. Weekly: The programme will be recorded every week

at the specified time. Serial

: A programme running regularly, but with different star t times, can be conveniently programmed. In this case, the TV set is checking ervery day at the specified time, whether the programme is available in the EPG data. If so, the program is recorded, if not, the next review will be made the following day.

DR+

20:15 - 21:45 Tatort: Jagdzeit

101 Das Erste HD

23.07.2012

20:15

21:45

Recorder

Programme

Station

Date

Beginning

End

Recording type

Timer data - Recording

Standard settings

Record station

Additional options

Current programme 101 Das Erste HD 20:15 - 21:45 Tatort: Jagdzeit

20:15

Back

Once only Mon-Fri Daily Weekly Serial

Explanations of the setting options in the menu Timer datapart 2 – Additional options

Lock

recording

Only allow later playback of this recording after entering the PIN number (Parental lock).

If a PIN still has not been entered under System

settings ט Control ט Parental lock, the Paren- tal lock will at first be activated.

Delete

protection

Safeguard the recording from being deleted automatically by using the delete manager.

Auto time

control

Your TV set can use the automatic time control (Accurate Recording) for recording a programme. The automatic time control takes control of the corresponding monitoring of the start and end time for DVB stations. The recording is started at the beginning of the broadcast and switched off at the end, even if the start and/or end time have been changed by the programme provider.

The automatic time control is not supported by

all stations.

If yes is selected and automatic time control is

not supported by the recorded channel then no recording is made.

If the programme information (Event-ID) should

not be available any more for the recording of a programmed broadcast. e.g., due to a programme change or because the Event-ID has been changed by the station, the programme cannot be recorded. The broadcasters alone are responsible for the transfer of this data for using automatic time control. The availability of the appropriate data cannot be guaranteed by Loewe.

Recording

subtitles

Select whether broadcast subtitles are to be recorded too.

In case of a direct recording the presetting is

taken from System settingsט Control טmore ... טDR+טRecording subtitles.

Favourite

When selecting yes the recording will be added to the Home favourites.

Connect ID 40-55 DR+ User guide

Timer Services

This menu offers you convenient alarm services. Programmed alarms are also active when the TV set has been switched off to standby. If the TV set is switched on from the standby mode by alarm, a screen message appears. If this is not confirmed within 5 minutes with the OK key, the TV set switches automatically off again for safety reasons. The TV set can also be switched off automatically at certain times. A screen warning appears one minute before automatic switch off. The automatic switch off can be interrupted by pressing any key.

Call Timer Services

Pressing long: Call up the timer.

 Mark Timer Services.

Or:

HOME: Call Home view.

 Mark Extras, OK call Extras.

 Mark Timer,  go to next column.

Mark Timer Services.

Select the desired setting, OK change.

OK adopt.

Switch off once no yes, at 23:59

Switch off daily no yes, at 23:59

One-time alarm no yes, at 23:59

Wake up Mon-Fri no yes, at 23:59

Wake up Sat no yes, at 23:59

Wake up Sun no yes, at 23:59

Wake up with TV Radio

Wake up signal volume

Timer Iist Timer Services

Back

Timer

Adopt with

Explanations of the setting options in the timer functions menu:

Switch off

once

The set switches to the standby mode automatically at the specified time. If a time is specified which has already passed on the same day, the set switches off at this time the next day.

Switch off

daily

The set switches to the standby mode automatically every day at the specified time.

One time

alarm

The set alerts you once today at the specified time. If a time was specified which has already passed on the same day, the alarm is saved for the next day.

Wake up

Mon-Fri

The set regularly alerts you from Monday to Friday at the set time.

Wake up Sat

The set alerts you regularly every Saturday at the specified time.

Wake up Sun

Explanations of setting possibilities in the Timer functions menu.

Wake up with

Specify whether the TV set switches on in the event of an alarm from the standby mode in TV or Radio mode with the respectively last active station.

Wake up

signal

volume

Set the desired volume of the alarm tone. The alarm tone is emitted as a continuous tone as a guide during the setting.



Extras Timer

Connect ID 40-55 DR+ User guide

Conditional Access module (CA module)

In order to receive coded digital stations, a Conditional Access module (CA module) and a Smart Card must be inserted in the CI slot of your TV set.

The CA module and the Smart Card are not part of the set of equipment supplied with the TV set. They are usually available from your dealer. Loewe does not provide any guarantee for the functioning of the CA module.

The TV set must first recognise and set up the CA module during initial operation. Therefore, it can take up to a minute until decoding starts during initial operation.

Inserting the Smart Card into the CA module

Push the The side of the card with the gold chip on it should be pointing towards the thicker side of the insertion slot (see illustration). Note the direction of the arrow printed on the Smart Card.

Inserting the CA module into the TV set’s CI slot

Switch off TV set using the mains switch.

Remove the cover from the rear of the set.

Insert the CA module carefully into one of the two CI slots, ensuring that the contact side goes in first. Do not use force. Make sure the module is not twisted in the process. Push the CA module in as far as it will go.

Finally, close the side cover.

Smart Card

CA module

Contact side

Searching for scrambled stations

HOME: Call Home view.

 Select System settings, OK call System settings.

 Mark Stations,  go to next column.

Automatic scan TV+Radio,  go to next column.

Select Change search settings, OKwizard guides you through the search settings.

Under scrambled stations you have to select yes.

Next select Start search/update, OK start updating the station list.

Calling CA module information

This menu is only available when a CA module is

plugged in.

HOME: Call Home view.

 Mark Extras, OK call Extras.

 Select desired CA module.

The indicated name depends on the inserted

CA module.

 go to next column.

 Select CA module, OK call information.

The content of this menu depends on the provider of the CA module.

Removing the CA module

Switch off TV set using the mains switch.

Remove the cover from the rear of the set.

Pull the CA module out of the CI slot.

Replace the cover.

Troubleshooting (CA module)

The following information can help, if problems should occur when running a CA module:

Switch the TV set off to the standby mode. Remove the CA-module from the TV set. Switch the TV set off completely. Wait a few seconds. Reinsert the CA module. Switch the TV set on again.

If errors continue to occur, make a note of the displayed two-digit error code (only possible for CI Plus capable CA modules) and contact your dealer.



Extras CA module

Connect ID 40-55 DR+ User guide



Extras CA module / DR+ Streaming

DVB Common Interface Standard (CI)

Selection possibilities in the CA module menu and performance capability of your CA module depend on the type of module used and the software installed on it. Consult the manufacturer of the module if you have any questions.

DVB Common Interface Plus Standard (CI Plus)

CI Plus is an advanced development of the DVB Common Interface Standard. CI Plus slots are in principle downward compatible to the previous CI standard, i.e. CA modules and Smart Cards according to the past CI standard can continue to be used in CI Plus slots, as far as the programme provider permits this.

Programme providers, who use the CI Plus standard, can assign different rights for their broadcast programmes. For instance, the programme provider can restrict or completely prevent recording or later watching of an encoded programme. If there are such regulations, these also apply to time-shifted watching of television programmes. A screen message informs you of this fact, if you would like to record such a programme. Recording is carried out in such a case (an appropriate entry is displayed in the DR+ archive), later watching of the programme is however not possible at all or only for a limited period (e.g., 10 days). A possible time limitation of the playback will also appear in the corresponding entry in the DR+ archive.

All restrictions mentioned here are the responsibilities of the broad-

caster. The TV set simply values the broadcaster set signalling as neutral.

Furthermore, the programme provider can prevent external copying of protected programmes.

It could be necessary to enter the parental protection PIN of the CA module when programming the data, if you want to record a CI Plus protected programme, which has been protected against viewing by minors. The Parental lock PIN can also be store in the TV set. The secret number of the TV set is required for watching the programme later.

The appearance of the CA module menu depends on the manufacturer of the module.

Software update for CI Plus capable CA modules

Every now and then, there will be new system software for your CA module software. There are two software update types.

Recommended update: Information on an available update is displayed. You can either run this or cancel the procedure. If you do not install the update, the information will reappear in regular intervals until the update has been installed.

Forced update: Information on an available update is displayed. The module does not decode any more until the update has been successfully implemented.

DR+ Streaming

Here, you can switch off the TV set to the advanced standby mode for DR+ Streaming.

Advanced standby mode with DR+ Streaming access

Switching off the accessible TV set ends access to the DR+ archive. You can, however, switch your TV set to an advanced standby mode to enable access to the DR+ archive even when the TV set is switched off (server function).

HOME: Call Home view.

 Mark Extras, OK call Extras.

 Mark DR+ Streaming.

OK Confirm.

The TV set will switch to the advanced standby mode. The DR+ archive will then be accessible within the network for the period of time set in the DR+ Streaming - Settings.

DR+ Streaming

AV Auswahl

DR+ Streaming

By activating this function you can make your TV set available to other LOEWE TVs that are set up for this for a specified period of time (can be configured using the digital recorder menu item "System settings -> Control -> more -> DR+ -> DR+ Streaming -> DR+ standby").

Energy efficiency

CA module Viaccess

CA module AlphaCrypt

Special functions

Software

Connect ID 40-55 DR+ User guide



Extras Special functions / Integrated features

Special functions

Calling special functions

HOME: Call Home view.

 Mark Extras, OK call Extras.

 Mark Special functions,  go to next column.

Select desired function, proceed to next column.

Explanations of the setting options in the Special functions menu:

Integrated

features

See right-hand column.

Repeat initial

installation

You can repeat the Initial installation again at any time. You are guided through the various menus where i.a. an automatic TV/radio station search is automatically carried. Caution: All stored stations and all created personal lists will be deleted by this!

If a parental lock is activated, the access code must be entered before repeating initial installation.

Reset to

factory

settings

Reset the settings of Picture/Sound, Speaker system or Network to factory settings.

Special functions

Integrated features

Repeat initial installation

Reset to

Here you can obtain information on the integrated features of your TV set.

Integrated features

Here you can obtain information on the integrated features of the TV set.

See the rating plate on the rear of the set for the precise product

designation.

Call Integrated features

HOME: Calling the Home view.

 Mark Extras, OK call Extras.

 Mark Special functions,  go to next column.

 Mark Integrated features, OK call Integrated features.

 Scroll content up/down.

Integrated features

Manufacturer LOEWE

Serial number 834 Article number 52401B43 Chassis SL220 Software 2.1.34.0 CI Plus NO Nicam DD/DTS PIP Digital Recorder (DR+) Channel 1 A/T/T2/C/S/S2 Channel 2 A/T/T2/C/S/S2

Integrated features

Back

Here you can obtain information on the integrated features of your TV set.

Move content up and down with the cursor

Connect ID 40-55 DR+ User guide



System settings

Under the menu item System settings in the Home menu you find all settings and adaptabilities of your TV set. These are explained to you more in detail as follows.

Calling System settings

HOME: Call Home view.

 Mark System settings, OK call.

Or:

Press MENU key longer: call System settings.

Explanations of the setting options:

Picture

Here you do the settings referring to the representation of the picture signal on your TV set. See chapter System settings, section Picture for further information.

Sound

Under this menu item you find the settings for sound playback. The subitems of the menu depend on the currently selected sound component. See chapter System settings, section Sound for further information.

Stations

Move and delete TV and radio stations. In addition to that you can automatically and manually update the complete station list. Your stations can also be arranged and optionally sorted in personal lists. See chapter System settings, section Stations for further information.

Control

In this menu you find settings for additional functions of your TV set like picture in picture (PIP) and digital recorder (DR+) as well as interfunctional settings like time and date, parental lock or software update. See chapter System settings, section Control for further information.

Multimedia /

Network

By means of the Multimedia / Network menu you configure your network adaptor and network access. Moreover, you can make settings for video and music playback here. See chapter System settings, section Multime- dia/Network for further information.

Connections

Using this menu you configure external devices that are connected to one of the numerous connections of the TV set. See chapter System settings, section Connec- tions for further information.

Picture

Sound

Station

Control

Connections

Multimedia / Network

Here you can adjust among other things: Contrast, colour, brightness, picture adjustment, sharpness, picture format.

Connect ID 40-55 DR+ User guide



System settings Picture

Picture

Here you do the settings referring to the representation of the picture signal on your TV set.

Calling picture settings

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Picture,  go to next column.

Select desired picture function,  proceed to next column.

Explanations of the picture settings:

Do the settings for your TV set‘s 3D display.

Picture

adjustment

You can switch between three preset picture settings and the three personal picture values that you have adjusted.

Contrast

The contrast setting depends on the brightness of the room. The brighter the surroundings the higher the contrast should be set. The power consumption of the TV set depends directly on the value set here.

Brightness

Set the brightness so that the black areas of the picture only just appear black.

Colour

intensity

Set the colour intensity to suit your personal taste.

Image

Active

Picture enhancement on/off.

Picture

format

Set picture format.

more ...

call with OK (see right-hand column).

Picture

Picture adjustment

Contrast

Brightness

Colour inten

Image+ Active

Picture format

more ...

If your desired display format has not been automatically selected then you can choose it in the 3D settings menu. You may display the 3D image in 2D or vice versavice versa.

Explanations of the picture settings (continuation):

Colour

temperature

Here, you can give the TV picture a warmer or colder hue according to your personal taste.

Sharpness

Here you can adjust picture sharpness to obtain the best definition.

Move picture

up/down

When using the TV aspect ratios Panorama or Zoom, the text or graphic displays at the top and bottom are not or only partially visible. You can move the picture up or down with the up/down menu control keys to make the displays visible.

Auto

dimming

depending on video (VBD+): The background lighting is reduced depending on the current video content and the video signal is simultaneously amplified in order to get an improved contrast of your TV picture.

depending on the environment (OPC): The contrast of your TV picture is automatically reduced vs. decreasing room brightness (Optical Power Control – OPC).

The automatic dimming also results in a lower

power consumption of the TV set.

Due to a reduction in the luminance in 3D mode

for technical reasons, this function is deactivated when showing 3D content.

Film quality

improvement

(DMM)

DMM reduces jolt in rapid picture object movements and rolling text displays. This applies especially for movies.

Digital Noise

Control (DNC)

With active DNC (Digital Noise Control) you can eliminate or reduce picture noise.

Skin tone Adjust the skin tone so that the most natural facial

skin colour is achieved.

Deblocking

filter

To minimise the visible interference to the picture caused by modern compression methods for images and image sequences (formation of small blocks), a so-called deblocking filter can be activated which counteracts this interference.

PC IN

display

For some PC image formats, horizontal as well as vertical position and the phase position of the image can be corrected.

Connect ID 40-55 DR+ User guide



System settings Picture

Picture adjustment

By selecting one of the three presets (Home Mode, Premium Mode or Shop Mode), the picture settings for whichever signal input group that is currently active will be set to predefined settings.

You can use Personal Mode to specify individual settings for contrast, colour intensity, colour temperature, sharpness and digital noise suppression. Here you can enter your own specifications for each signal input group.

Calling picture adjustment

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Picture,  go to next column.

 Mark Picture adjustment,  go to next column.

 Select mode, OK adopt selected mode.

When selecting one of the three preset picture

adjustment modes you have to specify additionally if the mode shall be set only for the currently selected signal source, e.g., Only for HD Digital or

for the entire TV.

Explanations of the picture adjustment modes:

Home Mode

The emphasis for the picture settings is here on low energy consumption for home use. In this case, the TV set switches automatically off after 4 hours of unattended time.

Premium

Mode

The picture settings in Premium Mode are optimised for a brighter environment at the cost of higher energy consumption.

Shop Mode

The picture settings in Shop Mode are adjusted to operation in the presentation room.

Personal

Mode

Here, you can recall your last personal picture settings.

...

Picture adjustment

Home Mode

Premium Mode

Shop Mode

Personal Mode

The priority here is low energy consumption in home use. In this case the TV switches off automitically for the sake of saving energy, after it has been out of operation for four hours.

Adopt with Adopt with

Selecting the picture format

The setting options depend on the transmitted picture content.

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Picture,  go to next column.

 Mark Picture format,  go to next column.

 Select format, OK adopt selected format.

Explanations of the picture formats for HD signals:

4:3 TV

16:9 TV

Proportionally correct display of 4:3 or 16:9 broadcasts. You select this mode when the signal is not supplied by a PC (normal case). A small part of the picture is truncated. This may be necessary to hide possible interference at the edge of the picture, which arises from the signal supplied.

16:9 PC 16:9 PC

Proportionally correct display of 4:3 or 16:9 broadcasts without loss of information. You select this mode when the signal is supplied by a PC.

4:3 Zoom

16:9 Zoom

Proportionally correct display. Maximum picture magnification. Displayed text may get lost.

Explanations of the picture formats for SD signals:

16:9 Proportionally correct display of 16:9 broadcasts.

4:3 Proportionally correct display of 4:3 broadcasts.

Panorama 1 Proportionally correct display of 4:3 broadcasts on

the 16:9 screen. Station logo and subtitles remain visible.

Panorama 2 Format filling display (factory default) of 4:3 broad-

casts on the 16:9 screen. Station logo and subtitles remain visible.

Zoom Proportionally correct display. Maximum picture

magnification. Displayed text may get lost.

PALplus Is a 4:3-compatible 16:9 picture broadcast supplied

by the station which is detected automatically.

...

Picture format

16:9 TV

16:9 PC

16:9 Zoom

4:3 TV

4:3 PC

4:3 Zoom

This 16:9 TV mode enables a proportionally correct display of 16:9 pictures. You select this mode when the picture signal is not supplied by a PC (normal case).

Connect ID 40-55 DR+ User guide



System settings Picture

3D function

You can use the 3D functionality of your TV set to display 3D material transmitted by a channel or from an external player that is connected.

You require a pair of Loewe Active Glasses 3D to be able to use the 3D functionality in its entirety (see chapter Accessories). Please read the operating instructions included with the 3D glasses.

3D settings

Using the 3D settings you can select the correct display format, should this not have been detected automatically. What’s more, you can choose to view 3D material in 2D or “traditional” 2D material in 3D.

For 3D content that is being played back from an external HDMI player, the 3D display format is normally recognised correctly when the factory setting 3D mode טAutomatic is selected. You may need to set the 3D mode manually to view 3D content from broadcasters.

Owing to a reduction in the luminance in 3D mode for technical

reasons,

Auto-dimming - Room

and

Auto-Dimming- Video (VBD+)

are deactivated when 3D contents is displayed.

If the TV set is operated with the remote control during a 3D play-

back, flicker effects can occur in the 3D glasses when doing this.

Calling 3D settings

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Picture,  go to next column.

 Mark 3D,  go to next column.

 Select settings, OK adopt.

...

Back

With this you can select the correct display format, should this not be recognised automatically, or you can deactivate the 3D mode.

3D->2D

2D->3D

3D mode

3D->2D

2D->3D

3D mode

Automatic side by side top/bottom

off on

Explanations of the 3D settings:

3D->2D

off/on

If you set 3D->2D to on, the 3D material from TV stations as well as from external players will be changed into 2D and played back. The three dimensional (3D) effect will disappear. You will not need to wear the 3D glasses to view it properly.

2D->3D

off/on

If you set 2D->3D to on, all 2D image material will be displayed in 3D. You will need to wear the 3D glasses to view it properly.

3D mode

Automatic

If the TV is set to this setting (factory setting), then the TV set automatically switches over to the correct 3D mode, if this is possible and supported by the broadcaster. Only change the setting if the 3D content is not displayed correctly.

side by side

To display 3D content in side by side format. When viewing 3D content with this setting, two almost identical images are displayed next to each other and put together correctly by the TV set.

The 3D mode is Automatic reset the next time you

switch on the TV set.

top/bottom

To display 3D content in top/bottom format. When viewing 3D content with this option, two almost identical images are displayed one above the other and put together correctly by the TV set.

The 3D mode is Automatic reset the next time you

switch on the TV set.

Connect ID 40-55 DR+ User guide



System settings Picture

Picture format / 3D mode

If 3D contents are recognised by the TV device, the picture format cannot be subsequently changed. The picture format when in 3D operation is always 16:9 PC.

Instruction / Symbol

If 3D content is detected by the TV set, a corresponding message appears. The instruction text will disappear after the display time has elapsed.

In the status display, 3D content is indicated by an icon.

The following images will be displayed in 3D mode. For this part, put the 3D glasses on and then switch them on. Viewing 3D images for extended periods of time can tire out the eyes and/or cause feelings of dizziness.

Digital 2

20:42 21.01.2013

125 ASTRA 3D

20:15 - 21:00 ASTRA 3D Demo

21:00 - 21:45 ASTRA 3D Demo

Connect ID 40-55 DR+ User guide



System settings Sound

Sound

Calling the sound settings

The selectable menu items depend on the selected station and the

connected sound components (e.g., sound projector).

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Sound,  go to next column.

Select sound function,  proceed to next column.

Explanations of the sound settings:

Sound mode

Select the number of speakers you want to hear. The selection depends on the connected sound components and on the transmitted audio signal.

If the number of speakers appears in brackets,

the sound of missing speakers is transmitted by the existing speakers (virtually).

Optimum

܃ ܃ ܃ ܃ ܃

HiFi/AV

amplifier

The momentarily reproduced audio signal is output with the ideal number of speakers. Play centre sound or mono (left/right). Play front sound (L/R stereo). Play front and centre sound. Play front and surround sound. Play front, surround and centre sound.

Play via an external HiFi amplifier. Selection is only possible if an amplifier has been selected in the sound components wizard.

Dolby PLII

mode

Here you can make Dolby Pro Logic II sound settings for movie and music.

Menu item only appears with certain sound mode

settings.

Sound

adjustment

Here, you can adapt preset sound characteristics of the respective broadcast. Selectable are, e.g., Speech, Classical, Pop, Custom music and Film soundtracks. For personal music and film sound you can do the settings for pitch and bass sound (high and low frequencies).

Sound

Sound modeSound mode

Sound adjustment

Volume adjustment

LoudnessLoudness

more ...

Possible sound formats depend on the number of channels available in the received audio signal. If more audio channels are supplied than the number of speakers available then you can create a pseudo mode by selecting the speaker number which is contained within brackets. If you select “optimal” then the number of speaker used will automatically, if possible, match the number of audio channels received, this normally gives the best sound quality. If a sub woofer is connected it is always active unless you select mono mode i.e a single speaker. 5܃= playback of front, surround and centre sound 4܃= playback of front and surround sound 3܃= playback of front and centre sound 2܃= playback of front sound 1܃= playback of external centre sound or mono (left/right) Amplifier ܃= playback via HiFi/AV amplifier

Souond pic-

Explanations of the sound settings (continued):

Audio

commentary

volume

Set the volume of the audio commentary to be relative to the volume of the programme being transmitted. Should negative values result (those in the area of

-50… -1), the audio commentary is quieter than the programme sound. Should positive values result (those in the area of +1… +50), the audio commentary is louder than the programme sound. If the value 0 results, then the audio commentary is at the exactly the same volume as the programme sound.

The menu item only appears if audio commentary

is activated (see chapter System settings, sec- tion Control – DVB settings) and is offered by the current station.

Additionally, the Loudspeaker sound or Head-

phone sound must be set to normal + audio commentary must be switched on (see next page).

Loudness

Proper boost of bass and treble tones at low volume.

Sound

picture

synchronisa

tion

If the sound and picture are not precisely in sync, you may correct this here. Move the mark on the bar downwards, slowing down the sound compared with the picture. Move the mark upwards, speeding it up compared with the picture. Time adjustment of the sound occurs in steps of 10 ms in each case.

only available for DVB stations.

Volume

adjustment

The volume can differ according to the individual stations. If the sound is too loud or too quiet in relation to other stations, adjust the volume. When the menu is open, you can select the stations one after another with P+/P– and adjust every single station conveniently.

more ...

call with OK (see next page).

Connect ID 40-55 DR+ User guide



System settings Sound / Stations

Stations

Under the item Stations you find all settings concerned with station search for TV and DVB radio as well as functions for creating and editing the various station lists.

Station management is not possible as long as a programmed timer

recording is active.

If at least one station is locked, the access code must be entered

prior to automatic search

The procedure for radio stations or Station lists Radio is similar to

that for TV stations or Station lists TV. Therefore, this procedure is described only for TV stations.

Call Stations menu

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Stations,  go to next column.

Select desired function,  proceed to next column.

Explanations of setting possibilities in the Stations menu:

Automatic

scan

TV+Radio

Here you start the wizard that searches and stores all TV and DVB radio stations.

Manual scan TVHere, you can enter all the settings available for a

TV station.

Manual scan

Radio

Here, you can enter all the settings available for a DVB radio station.

Station lists TVHere you can move and delete TV stations in all

lists. You can put together your most frequently watched programmes in one or more lists of personal favourites.

Station lists

Radio

Here you can move and delete DVB radio stations in all lists. You can put together your most frequently watched programmes in one or more lists of personal favourites.

Update

station list

automatically

If the channel list is not up to date, it will be updated automatically, provided the parameter Allow is selected.

Stations

Manual scan Radio (incl.

Station lists TV

Station lists Radio

In this mode you open a wizard which automatically searches and saves all the TV and radio stations. Please follow the instructions in the dialogues below.

Update

Explanations of the sound settings (continued):

more ...

Loudspeaker/

Headphone

sound

For analogue stations: Selection options for Mono/ Stereo or Sound 1 or Sound 2 for bilingual programmes, separately for the loudspeakers and the headphones.

For DVB channels: You can choose here if you wish to listen to a special soundtrack for the visually impaired over the speakers. This soundtrack uses an audio commentary to describe the action taking place on-screen.

The menu item only appears if an audio commen-

tary is offered by the current channel.

Auto volume

The volume may vary when receiving stations with different standards, when switching from station to station or during commercials. You can reduce these differences in volume by selecting auto volume on. For music and live broadcasts you get a better sound spectrum with auto volume off.

output signal

You can indicate here which sound is output via the AV socket for dual sound programmes: Sound 1 (e.g. main language), sound 2 (e.g. foreign language), or sound 1+2 (both simultaneously).

Maximum

volume

You can limit the volume adjustment of the loudspeakers. This prevents selecting a volume which is too loud.

Maximum

switch on

volume

Set the sound level to be heard after switching on the TV set with the mains switch or after a power failure. When switching on the TV set in standby mode, the volume last used is retained unless it was above this switch-on level. Otherwise it is limited by this.

Balance

Set stereo balance so that the volume impression is identical on the left and right.

Auto speech

detection

If the automatic speech detection is activated, the sound of the current programme is automatically output with optimum comprehensibility when speech is detected.

Connect ID 40-55 DR+ User guide



System settings Stations

Automatic scan TV+Radio

For automatic scan TV+Radio, a search wizard will be started that searches for new stations which are not yet stored.

You have to repeat the initial installation and auto-

matically search for new stations if you want to delete all the existing stations and automatically search for new ones.

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Stations,  go to next column.

Mark Automatic scan TV+Radio, go to next column.

In the upper info text the current search settings will now be displayed:

If you want to change these search settings:

 Select Change search settings, OKwizard guides you through the search settings

(see column on the right).

If you agree with these settings:  Select Start search/update,

OKstart scan.

BACK: Cancel current search/update.

Explanations of some search settings:

Age-related

lock

You can specify an age limit for your TV set here. DVB broadcasts that have an appropriate age identification are locked and can only be watched after entering the access code.

Signal source

Select cable (analogue), DVB-T, DVB-C or DVB-S depending on which signal source you want to search for new stations. Use the Antenna wizard to call the configuration of the DVB-T and DVB-S antennas.

Calling up the DVB antenna configuration causes

the Change search settings dialogue to be quit. You must call up the dialogue again after finishing the configuration.

Cable

(analogue)

TV/colour

standard

With the selection of TV set location the conventional TV standard/colour standard is the default. This should only be changed if stations with other standards are to be searched.

......

Your TV carries out the update of the station list (search for new stations; delete stations no longer broadcast) with the following settings:

Location of TV set D Germany Signal source Cable analogue

Change search settings Start search/update

SEARCH WIZARD - Check search settings

End with

Explanations of some search settings (continued):

DVB-T/C/S

Network

selection

If several networks are available, you can decide which network you want to receive your channels from.

DVB-T/C/S

Settings

With the selection of set location the conventional settings will be preset. Only change these defaults if you are familiar with other parameters.

Scrambled stations:

(DVB-T/C/S)

You can state whether scrambled stations are to be searched for in the search/update. If you select yes, coded stations will also be searched for. However, these stations can only be received in connection with a CA module and the appropriate Smart Card. Ask your dealer which Smart Card you need to receive certain stations.

Search method: (DVB-T) If you want to run the station search independently

of the channel grid, select Frequency search for the search method.

Search method: (DVB-C) If you select Frequency search here, a search is

performed for all receivable stations. With Network search, only the stations which the networks supply are searched - either for all receivable networks or only for the particular network specified under

Network ID.

Network ID: (DVB-C)

If you select none here, DVB signals of all current broadcasting networks are scanned automatically (recommended for most cable networks). If, on the other hand, you specify a cer tain network ID (necessary in the cable networks of some countries), only DVB signals of this broadcasting network are searched for automatically. Your cable provider has the information you need.

Search method: (DVB-S) If you select Frequency search here, a search is

performed for all receivable stations. With Network search, from all receivable networks all the stations are searched which are supplied by these networks.

Accept Logical Channel Number: (DVB-T/C/S) In various countries, digital stations (DVB-T/C/S) are

transmitted with a preset channel number per station, known as Logical Channel Numbers (LCN).

If you select yes here, these default channel slots will be used and the channels of the preferred signal source will be sorted as per LCN. The stations in the station list can no longer be shifted.

Connect ID 40-55 DR+ User guide



System settings Stations

Search for/update stations – handling of new and no longer found stations

The number of new TV stations found is displayed after the automatic search / update has been completed.

 Proceed. The number of new radio stations found

is displayed.

 Call list of new TV stations found.

 Select station.

OK Mark / unmark station.

 stores the marked TV stations. The list of new radio

stations found is displayed.

 Select station.

OK Mark / unmark station.

 Proceed.

Afterwards, a list of the stations which are saved but which are temporarily not broadcasting or no longer exist is displayed, if available. The number of the memory location used is displayed in front of the station. Please select the stations you really want to delete.

 Select station. OK Mark / unmark station.

 Proceed. The marked stations will be deleted. The

list of radio stations no longer found is displayed.

 Select station.

OK Mark / unmark station.

 End search wizard.

...

All newly found TV stations which are marked with a are then saved. With the button, you can set or remove the marking. Note: The newly found stations which you have already deleted are not marked.

Newly found stations

Proceed with

3sat HD ANDALUCÍA TV arte

a.tv ANIMAX ARTE Achtung Singles TV ANIXE HD ARTE Francais Aktiv Direkt TV anixe iTV ARTE HD Al Jazeera ANIXE SD Astrocanal TV Al Jazeera English ARD Astro TV Amore TV ARIRANG TV ATV+

...

The following stored TV stations were no longer found because they are not currently broadcasting a programme or no longer exist. All TV stations marked with a are subsequently deleted. The unmarked stations are retained. You can set or remove the marking with the button.

Stations no longer found (TV)

Proceed with

Channel TV Press TV

Direct 3 iM1 Direct 4 Direct 5 GoTV ATV+ BVN

Manual Scan TV / Radio

Here, you can enter all the settings available for a station. However, this requires detailed knowledge.

The manual search of radio stations is similar to that of TV sta-

tions. Therefore, the manual search for radio station is not dealt with separately.

Calling manual search

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Stations,  go to next column.

Mark Manual Scan TV, OKcall Manual Scan.

Select the menu item Signal source to decide in which area you want to search for stations. Depending on the selected source, various setting possibilities will be available.

On the next page, the settings for analogue cable and DVB-T/C/S sources are described separately.

Status bar for manual search

Status bars are displayed for manual search, which show the reception quality of the individual stations during the station scan. The markers in all bars should preferably be in the green area.

C/N: (Carrier/Noise) The bar shows the signal-tonoise ratio. The value indicated in dB should be preferably high.

Level: The bar shows the receiving level of the station. The value displayed in dBμV should be preferably high.

BER: (Bit Error Rate) The bar shows the bit error rate of the station. The value for BER should be as low as possible.

...

Signal source Cable analog DVB-T DVB-C DVB-S

TV standard B/G I L D/K M

Colour standard PAL SECAM

Channel E 01 S 01

Frequency 044.00 MHz

Name

C/N 40.5 dB

Level 54 dBμV

Signal source Cable analog DVB-T DVB-C DVB-S

TV standard B/G I L D/K M

Colour standard PAL SECAM

Channel E 01 S 01

Frequency 044.00 MHz

Name

C/N 40.5 dB

Level 54 dBμV

Manual TV scan (incl. antenna status)

Here, you can enter all the settings available for a station. However, this requires detailed knowledge.

Back

Station name

C/N 71.5 dB

Level 58 dBμV

BER 0 E-7

Connect ID 40-55 DR+ User guide



System settings Stations

Manual search for cable analogue (analogue cable reception):

Manual search is called. Cable analogue has been selected as signal source.

 Mark and adjust settings,

OK confirm as the case may be.

 Mark Search,

OK start search.

If a station has been found:

 Mark Store/Overwrite, OK store station.

Explanations on the search settings for cable analogue:

Signal source Selection of range in which you want to search for the

station.

TV standard

If necessary, ask your dealer which standard to select for specific channels or AV equipment.

Colour

standard

If necessary, ask your dealer which standard to select for specific channels or AV equipment.

Channel

Direct input of channel.

Frequency

Direct input of station frequency. Range for entry: 044.75 MHz - 859.25 MHz.

Name

Here, the name of the found station is displayed. You can change the name of the station.

...

Signal source Cable analog DVB-T DVB-C DVB-S

TV standard B/G I L D/K M

Colour standard PAL SECAM

Channel E 01 S 01

Frequency 044.00 MHz

Name

C/N 40.5 dB

Level 54 dBμV

Signal source Cable analog DVB-T DVB-C DVB-S

TV standard B/G I L D/K M

Colour standard PAL SECAM

Channel E 01 S 01

Frequency 044.00 MHz

Name

C/N 40.5 dB

Level 54 dBμV

Manual TV scan (incl. antenna status)

Here, you can enter all the settings available for a station. However, this requires detailed knowledge.

Back

Manual DVB-T/C/S search:

Manual search is called.

 Mark and adjust settings,

OK confirm as the case may be.

 Mark Search,

OK start search.

When a DVB transponder has been found:

 Mark the station, OK Station will be ticked with

. If necessary,

repeat for several stations.

Stations that already exist in the station overview

will be displayed with their station number on the left.

 Mark Store/Overwrite, OK Stations marked with

will be stored.

Explanations of some search settings:

Signal

source

(DVB-T/C/S)

Selection of range in which you want to search for the station.

Channel

(DVB-T)

Direct input of channel.

Satellite

(DVB-S)

Here you can select the satellite where the stations are to be searched for.

Band

(DVB-S)

Here you can select the frequency band in which shall be searched. Setting ranges: horiz/low 10694 - 11906 MHz horiz/high 11544 - 12756 MHz vert/low 10694 - 11906 MHz vert/high 11544 - 12756 MHz

Frequency

(DVB-T/C/S)

DVB-T/C: Direct input of station frequency. DVB-S: Direct input of LNC frequency

Symbol rate

(DVB-S)

Here you can specify the symbol rate Range: 1000-45000

...

Signal source Cable analog DVB-T DVB-C DVB-S

Frequency 044.00 MHz

QAM modualtion 16

Symbol rate 22000

Netzwork Standard

Station name

C/N 71.5 dB

Level 58 dBμV

BER 0 E-7

Back

Manual TV scan (incl. antenna status)

Here, you can enter all the settings available for a station. However, this requires detailed knowledge.

...

1024 arte HD 1025 kabel eins HD 1026 SPORT1 HD 1027 Cartoon Network 1028 Spiegel TV HD

1024 arte HD

1025 kabel eins HD 1026 SPORT1 HD 1027 Cartoon Network 1028 Spiegel TV HD

Found stations

Search Store/Overwrite

Mark/unmark with

Back

Connect ID 40-55 DR+ User guide



System settings Stations

Station lists TV / Radio

Under the menu item Station lists TV or Station lists Radio you can edit (delete block, move block, restore deleted stations) various lists, e.g., DVB-T, ASTRA LCN, DVB-C, etc. You can also create and edit new Personal lists.

The function of Station lists Radio is similar to that of Station lists

TV. Therefore, editing of Station lists Radio will not be dealt with separately.

Change station list

If at least one station is locked, the access code must be entered before changing stations

HOME: Call Home view.

 Mark System settings, OK call system settings.

 Mark Stations,  go to next column.

 Select Station lists TV,  go to next column.

 Mark desired station list,  call list.

Here, you can delete and move station blocks as well as restore deleted stations.

The following section describes how to proceed if you wish to Delete block, Move block and Restore

stations.

Delete block

 Select Delete Block,  move to list.

 Select beginning of block, OK mark beginning of block.

 Select end of block, OK mark end of block (selected stations are coloured

blue).

 Select Execute delete, OK block will be deleted, or

 select Cancel procedure, OK cancel delete.

19 Z 20 Z 21 Z 22 S 23 R 24 P 25 H 26 S 27 N

10 Das Erste 11 ZDF 12 arte 13 RTL HD 14 SAT.1 HD 15 ProSieben HD 16 VOX HD 17 kabel eins HD 18 Super RTL HD

1 Das Erste HD

2 ZDF HD 3 RTL 4 SAT.1 5 ProSieben 6 VOX 7 kabel eins 8 arte HD 9 Super RTL

ASTRA LCN

DVB-C

DVB-T

...

ASTRA LCN

New personal list

Back

Delete block Move block Restore stations

Here you can move stations around in all the lists, delete stations and restore stations you have previously deleted. You can edit frequently-used stations in one or more personal lists.

Move block / Change order

Stations with LCN cannot be reordered. In this case,

the function Move block is hidden.

 Select Move block,  move to list.

 Select beginning of block, OK mark beginning of block.

 Select end of block, OK mark end of block (selected stations are coloured

blue).

 Select insert position, OK Confirm insert position.

 Select Execute move, OK block will be moved, or

 select Cancel procedure, OK cancel move.

Restore stations

 Select Restore stations,  move to list.

 Select beginning of block, OK mark beginning of block.

 Select end of block, OK mark end of block (selected stations are coloured

blue).

 Select Restore stations, OK stations will be added again to the station list, or

 select Cancel procedure, OK cancel restore.

19 Z 20 Z 21 Z 22 S 23 R 24 P 25 H 26 S 27 N

10 Das Erste 11 ZDF

12 arte 13 RTL HD 14 SAT.1 HD 15 ProSieben HD

16 VOX HD 17 kabel eins HD 18 Super RTL HD

1 Das Erste HD

2 ZDF HD

3 RTL 4 SAT.1 5 ProSieben 6 VOX

7 kabel eins

8 arte HD 9 Super RTL

...

ASTRA LCN

DVB-C

DVB-T

ASTRA LCN

Back

Delete range Move range Restore stations Delete list

Cancel process Execute move

New personal list

Connect ID 40-55 DR+ User guide



System settings Stations

Compose / edit Personal list

Each personal list can contain up to 99 stations. You can compose the personal lists to suit your convenience (e.g., topic lists). Other persons using this TV set can create their own personal lists. You can create up to six personal lists.

Creating and updating personal station lists is not possible as long

as a programmed timer recording is active.

Create / edit New personal list

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Stations,  go to next column.

 Mark Station lists TV,  go to next column.

 Mark New personal list, OKNew personal list x will be created.

x stands for the number of the personal list.

The number depends on how many list were already created.



Mark the station in the station list which is to be added to the personal list.

OK adds the station to the personal list. The new station will be added at the end of the

personal list. Proceed in the same way with additional stations.

 Call up additional options.

ASTRA LCN

DVB-T

DVB-C

Examples of station lists. Select the station list from which you add stations to the personal list. In the per

sonal list you can store stations from different sources.

Sorting The sorting procedure for the source station list may

be changed between numerical and alphabetical.

BACK: Store and close station list.

...

14 ProSieben

13 n-tv

1 SAT.1

2 ZDF HD

3 BR Nord HD

4 3sat HD

5 ZDF Neo HD

15 3sat HD

16 ARTE HD

17 EinsPlus

18 Eurosport

19 ZDF Neo HD

20 ZDF.kultur

ASTRA1

19,2°E

Personal list 1

New personal list

Add station to personal list: Mark in right-hand column and press to add.

Delete station from personal list: Mark and press to remove.

Select other station list / sorting in right-hand column with "right menu control button"

Use to save new list.

Adding stations to Personal list

The Personal list must be opened to add new

stations to it.



Select Add/remove Stations in the function list.

How to add stations is described in the left column.

Deleting stations from the Personal list

The Personal list must be opened to delete stations

in it.

 Select Add/remove Stations in the function list, OKactivate.

 go to personal list.



Mark the station to be deleted in the personal list,

OK activate. Function of the coloured keys in standard

PIP functionality.

BACK: Store and close station list.

Move / reorder stations in the Personal list

The personal list must be opened to move stations

in it.

 Select Move stations in the function list,

OKactivate.



Select station to be moved in the Personal list,

OK mark (station will be coloured red).



Select insert position (insert position will be marked with a red line),

OK Execute move. Proceed in the same way with

additional stations.

BACK: Store and close station list.

Renaming the Personal list

The Personal list to be renamed must be opened.

 Select Rename list in the function list,

OKactivate.

Enter new name.

 Select Adopt.

OK New name for the personal list will be adopted.

Delete Personal list

The Personal list to be deleted must be opened.

Deleting of the list is irrevocable.

 Select Delete list in the function list, OKactivate.

Connect ID 40-55 DR+ User guide



System settings Stations

Update station list automatically

Some programme providers offer an automatic update of the station lists (Dynamic Channel Management). You may Allow or Block an automatic station list update. If automatic updating is allowed, a screen message about an available update appears whenever the list is changed.

Allow/block updates

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Stations,  go to next column.

Mark Update station list automatically,  go to next column.

 Select Allow or Block, OK adopt.

If the channel list is not up to date, it will be updated

automatically, provided the option Allow is select

Updating the station list

A message appears whenever the TV is switched on if the network provider changes their channel list.

In Update station list automatically, Allow must

be selected.

 Select the desired procedure.

...

Allow

Block

If the channel list is not up to date, it will be automatically updated provided the parameter "Allow" is selected.

Because your network provider has changed its station list, it has to be adapted on your TV set as well. Please specify when you wish to do this.

At once

After switch off to standby Later

Update station list

Proceed with

At once

The station list will be immediately updated. Normally this occurs in the background without interfering further with the TV‘s operation. In exceptional cases, it is however possible that during this process an automatic station change may be necessary.

After switch

off to

standby

The channel list will be updated the next time the TV set is switched off into standby mode.

Later

Updating the channel list will be postponed to a later date. When the TV set is switched on and off, the update message will appear again.

OK Confirm selection.

Connect ID 40-55 DR+ User guide



System settings Control

Control

In the chapter Control you find settings for the various operating modes like PIP and DR+ as well as settings referring in an interfunctional way to your TV set like, for example, time and date and on-screen displays.

Calling Control

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Select Control,  go to next column.

Select desired menu item,  go to next column.

Explanations of setting possibilities in the Control menu:

Language

Here you can define the menu language and for DVB stations also the subtitle and audio language.

Parental

lock

With the parental lock you can bar access to all stations immediately or daily for a certain period of time. The stations can also be locked individually. Age-dependent locking of programs with an appropriate age code is also possible.

EPG

Here you can do all EPG settings.

Energy

efficiency

Here you can determine how energy efficient your TV set shall be.

Quick start

mode

Here you can enable the Quick Start Mode. The TV set will then immediately switch on from standby without delay.

Software

Here you can download new software from a USB storage medium or from the Internet (as far as requirements exist for this).

more ...

After confirmation with the OK key you will be offered additional not so frequently used sub items for the current menu item (see right hand column).

Control

Language

Parental lock

Energy efficiency

Software

more ...

EPG

Here you can define the menu language and for DVB stations also the subtitle and audio language.

Quick start mode

more ...

On-screen

displays

Here you can make settings for the duration, position and existence of special on-screen displays.

Time and

date

The time and date are normally obtained automatically from the TV.

DVB settings

Here you can make settings which only refer to DVB stations (subtitles and audio mode, DVB character set).

PIP Settings

In this menu you can make all adjustments for the picture-in-picture display.

DR+

Here you can do all the settings for the digital recorder.

Standard

Teletext

Here you can do all Standard Teletext settings.

HbbTV

Here you can do all settings for the HbbTV mode.

module(s)

Here you can allocate stations to a CA module or assign the PIN for recordings.

Recording

Here you can specify the lead time and follow-up time for recordings.

Hard disks

Here you find tools to format or check the hard disks.

key

function

Here you can assign another function to the Web key. The selected function will then be called directly when the key is pressed.

Connect ID 40-55 DR+ User guide



System settings Control

Language

Specify the language for all menus in the TV set in the language menu. The language for the DVB subtitles and the film language can be set for DVB programmes.

Call language

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark Language,  go to next column.

 Select desired setting and make changes. OKAdopt settings.

Explanations of setting possibilities in the Language menu:

You can change the menu language here.

Subtitle

(DVB)

If subtitles are provided by the DVB station, you can set your desired language in advance here. If this is included in the range of languages of the station, it will be shown automatically.

You can also specify an alternative language under this menu item, in case your chosen language is not offered by the station.

Audio (DVB)

Specify your desired film language in advance here. If this is included in the range of languages of the station, it will be shown automatically.

You can also specify an alternative language under this menu item, in case your chosen language is not offered by the station.

.........

Language

Menu Subtitle (DVB) Audio (DVB)

Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)

English (en) Polski (pl) Dansk (da)

Français (fr) Magyar (hu) Português (pt)

Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru)

Español (es) Slovenščina (sl) Norsk (no)

Nederlands (nl) Slovenčina (sk) 中文(zh)

Čeština (cs) Türkçe (tr)

Menu Subtitle (DVB) Audio (DVB)

Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)

English (en) Polski (pl) Dansk (da)

Français (fr) Magyar (hu) Português (pt)

Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru)

Español (es) Slovenščina (sl) Norsk (no)

Nederlands (nl) Slovenčina (sk) 中文   (zh)

Čeština (cs) Türkçe (tr)

Language

You can change the menu language here.

Back

EPG

Calling EPG settings

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark EPG,  go to next column.

Explanation of the EPG setting options:

Station

selection TV

Station

selection

Radio

In the Station selection you can determine for which station in the programme guide, information is to be displayed. Programme information is only displayed for stations with

in the EPG list. Using the on-screen buttons in the bottom line you can mark all stations or unmark the stations or select stations from specific (e.g., personal) lists. Further information on EPG station selection you find in chapter TV, section Electronic Programme Guide – EPG wizard. Due to the large number of receivable stations you should restrict the station selection. This reduces the data entry time and increases the clarity in the EPG.

Data

capture

Here you can switch the data entry for the electronic programme guide (EPG) on and off. If the data capture is switched on, your TV set tries to update the database overnight (normally between 2 and 5 am) or, if required, two minutes after switching to stand-by mode. The TV set must be on stand-by for this and not switched off at the mains switch. The indicator on the TV set lights blue during data capture in stand-by mode. The data are also updated while you are watching the EPG station.

TV on when

memorised

When yes is selected in the setting, the switched off TV switches on automatically in standby mode at the beginning of a memorised programme. A screen message appears when switching on. If this is not confirmed within 5 minutes with the OK key, the TV switches automatically off again for safety reasons.

Clear data

base

This menu item allows you to remove all data from EPG database. It will take some time to retrieve this data again.

......

EPG

Station selection TV

Data capture

TV on when memorised

Please mark the stations with for which you want a program preview.

Clear database

Connect ID 40-55 DR+ User guide



System settings Control

Parental lock

You can select and set various security options to prevent unauthorised use of the TV set and to protect your children from unsuitable programmes.

Call Parental lock menu

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark Parental lock,  go to next column.

Define a four digit access code (PIN) the first time you open it. Note the access code (PIN) well.

The access code must not consist of the same four

digits.

 Mark Confirm, OK activate.

The new PIN must be entered and confirmed again.

The Parental lock menu will be opened.

The four-digit access code (PIN) must be entered when the parental lock is opened in future. For security reasons, it appears encrypted (****) when entering.

Note for unlocking

As soon as the PIN has once been entered to unlock your TV set, all currently set parental locks will be disabled temporarily. Besides of the general locks described in this chapter, this is also valid for parental lock of DR+ archive entries. Parental locks will only be re-enabled when the TV set is switched off.

......

Parental lock

Define 4 digit access code and memorise it, please. (Note: The same digit must not be used four times).

Parental lock

1 2 3 4 5 6 7 8 9 0

Cancel

Back

With the parental lock you can bar access to all stations immediately or daily for a certain period of time. The stations can also be locked individually. Age dependent locking of prorams with an appropriate age code is also possible.

......

Parental lock

Lock all stations Lock single stations Age-related lock Change acces code Deactivate

Immediately no yes

Daily no yes, from 00:00 until 00:00

Parental lock

Back

You can bar access to all stations. This can be done immediately or daily for a certain period of time.

Explanations of setting possibilities in the Parental lock menu:

Lock all

stations

The TV set is locked immediately the menu is exited. All programmes can then only be watched after entering the access code. The lock can be activated both Immediately and for a Daily defined period. The lock remains active until it is switched off in the menu.

Lock single

stations

You can lock / unlock individual or all of the stations in the station list specifically. The lock remains active until it is switched off in the menu.

Age-related

lock

Some DVB stations also broadcast an age classification. If the age set here is below the broadcast age limit, the programme can only be watched after entering the access code.

Change

access code

You can change your access code at any time. Enter the new access code in place of the old one.

Deactivate

All set parental locks (locked stations, age-dependent locks, locked films in the DR+ archive) are cancelled. The current secret code is deleted. When the parental lock is reactivated all the previous parental locks are set again automatically.

Reset

All currently set parental locks are finally cancelled. The access code is deleted.

Protection of minors for CI Plus programmes

Youth-protected broadcasts of programme providers with CI Plus encoding possibly require you to enter the secret number (PIN) of the CA module.

The Parental lock PIN of the CA module can be store in the TV set.

We recommend selecting the secret number of the TV set according to the secret number of the CA module, since the secret number of the CA module cannot be changed. This means that you must only remember one secret number.

Code number

The code number cancels all entered access codes. It can be used for example if you have forgotten your PIN. In the supplied quick guide you find a note on the access code number. Remove this one from the quick guide and keep it in a safe place.

Connect ID 40-55 DR+ User guide



System settings Control

Energy efficiency

Determine how energy efficient your TV set shall be. The value for the contrast (and thus the brightness of the background lighting) is adapted and the automatic dimmer activated or deactivated depending on the presetting.

Call Energy efficiency

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark Energy efficiency,  go to next column.

 Select desired setting and make changes. OKAdopt settings.

Explanations of the setting options in the energy efficiency menu:

Choosing Home Mode activates automatic shutdown. For Premium Mode or Shop Mode, automatic shutdown is initially deactivated.

Home Mode

The emphasis for home use is on low energy consumption. The automatic dimmer is activated.

Premium

Mode

Shop Mode

...

Energy efficiency

Home Mode

Premium Mode

Shop Mode

The priority here is low energy consumption in home use. In this case, the TV switches off automatically for the sake of saving energy, after it has been out of operation for four hours.

Quick start mode

If you enable the Quick Start Mode and you switch on the TV set from standby, the TV picture can be immediately seen without delay. You can specify the times at which your device will be in the Quick Start Mode.

Please note that in this case you will have a higher energy consumption.

Default setting for the Quick Start Mode: off

Call Quick start mode

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark Quick start mode,  go to next column.

 Select desired setting and make changes. OKAdopt settings.

...

Quick start mode

Here you can specify the times at which your device should be in quick start mode.

6 am - 9 am

11 am - 3 pm

6 pm - 9 pm

Quick start mode

Back

If you choose quick start here, you will see the TV screen immediately and without delay after switching on the TV set from standby. Note the higher energy consumption in this case.

on off

Connect ID 40-55 DR+ User guide

Software update

It is possible to update the software on your Loewe TV set. In the software update (package update) all the software releases in

the TV are scanned and updated as required.

Updating the software is not possible as long as a programmed

timer recording is active.

When a software update occurs it may happen that timer entries and memorised programmes are deleted. After such a software update, check your timer list

(see chapter Extras, section Timer – Timer

list).

Here you can download a new piece of software from different sources (if existing):

Current sof tware versions can be downloaded from the Loewe Internet site (see below) and installed on your TV set using a USB stick.

Please be aware of the requirements of your USB stick in section

Technical data – Media.

If your TV set is connected to the Internet, the TV set can be updated directly via the Internet.

Software download from the Loewe Internet site for update via USB

Where available, you can download new software for your TV set from our homepage.

Visit our homepage under: www.loewe.tv/int/my-loewe (using the Register now option).

Simply follow the steps in the registration process.

After the successful registration process and subsequent login to the support homepage you have to register your TV set (have the article number and serial number ready – both of these are on a label stuck to the back of the set or can be looked up under Extras – Special- functions – Integrated features.

Then you will get a list of downloadable contents for your TV set including the software. Download the data and unpack all the files in this ZIP archive into the main directory of your USB stick.

Then carry out the software update as described below.

USB stick - requirements

USB sticks tested by Loewe and compatible in type and format can be ordered from the Loewe dealer using the article no. 90456.900.

If you would like to use your own USB stick, please follow these tips/ conditions:

• Formatting in FAT32.

• Just one partition.

• Do not use encrypted USB sticks.

• Do not use USB sticks that simulate a CD ROM drive.

• There may be no hidden files on the device.

• For some types of device, the construction of the USB stick is significant.

Maximum dimensions in mm: 70x20x10.

• If in doubt, the USB stick should be formatted as “FAT32” without “extended attributes”.

In order to avoid problems during the software update of the tv set

the USB stick in use should meet the requirements.

System settings Control

Connect ID 40-55 DR+ User guide

100

Software update via USB storage device

To do this, plug the USB stick with the downloaded software into a free USB port of the TV set.

Calling Software update

HOME: Call Home view.

 Mark System settings, OK call System settings.

 Mark Control,  go to next column.

 Mark Software,  go to next column.

 Mark Software update,  go to next column.

 Mark Via USB,  call Software update. The version of the software package that is

currently installed will be displayed.

 Proceed. The TV set searches for a new software package

on the USB stick.

If a new software version is available after the search, an on-screen message appears (see right hand column). If several different software packages are found on the USB stick, the latest software package is always used.

If no new software package was found in the search: BACK:End of wizard.

...... Via USB

Current software: 2.1.25.0

To load a new piece of software, you first need to search for said software on a USB storage device that is connected (e.g. USB stick). Press the key to start the search.

SOFTWARE UPDATE WIZARD - Current software

Proceed with Cancel with

New software package found

 Proceed starts loading of the new software.

Or:

BACK: End of wizard. The update will then not be carried out.

Load new software package

The software is loaded in several steps. The total loading and programming process can take up to approx. 50 minutes in total.

Please do not switch off your TV set with the mains switch during the entire loading and programming process.

You will be informed at the end of the update. To make your TV set completely ready for use again, please turn it off and on again at the mains.

...... Via USB

New software

Proceed withProceed with End withEnd with

A new software version was found.

New software: V2.3.14.0 (Current software: V.2.1.25.0)

If you now wish to load the new software, press the button. Otherwise close with the button.

Ensure that the TV set is not switched off at the mains while it is loading the data.

A new software version was found.

New software: V2.3.14.0 (Current software: V.2.1.25.0)

If you now wish to load the new software, press the button. Otherwise close with the button.

Ensure that the TV set is not switched off at the mains while it is loading the data.

60%

...

... Via USB

Note: The loading and programming process can take up to approx. 50 minutes in total. Please do not switch off your TV set at the mains during this time.

Updating software

The "V2.3.14.0" software is currently being programmed, please wait ...



System settings Control

Loewe Connect ID 46 DR+, Connect ID 40 DR+, Connect ID 55 DR+ User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual