Lodar Function Receiver User Manual

92 Series - FM - 2/4/6 Function combined Receiver/Actuator with Standard Transmitter

SYSTEM PART NUMBERS
92 1 50 2 Function Receiver/Actuator + 2 Function Standard Transmitter
92 1 54 4 Function Receiver/Actuator + 4 Function Standard Transmitter
92 1 56 6 Function Receiver/Actuator + 6 Function Standard Transmitter

REPLACEMENT TRANSMITTERS
92 1 02TX 2 Function Standard Transmitter
92 1 04TX 4 Function Standard Transmitter
92 1 06TX 6 Function Standard Transmitter

Part Number 92 1 54 shown, 92 1 50 and 92 1 56 are similar, the number of functions vary.

FEATURES

Soft-Start - a flow control valve in the supply line allows adjustment of the air supply into cylinder, hence the speed at which it moves.
This gives a degree of "feel" to the system when "inching" equipment, without restricting the exhaust flow from the cylinder but also
allowing immediate shut off.

Manual over-ride - this is available at all times. At rest, both pipes to the cylinder are "open to atmosphere", allowing for free movement
of the piston, with return to centre when the system is deactivated.

ENCL

OSURE

Lid Smoke PVC - to view LEDs
Base Black PVC
Breather Gortex fitted in base
Vent Sintered brass vent
Mounting 4 external lugs
Fixings 5mm (3/16”) not supplied

Lodar, 12189 State Highway 148 S, Henrietta, Texas. 76265 – Tel: [phone] – Fax: [phone]

y

THE ACTUA TO

R

r

Chassis

Support Channel across vehicle

Bracket

Control Rod

Control rod setup on a popular carrier showing

air cylinder in an ideal mounting position

Simple to fit

One weld and one bracket

Cylinder

Control Lever

Housing

Weld

Simple to pipe

P

ush fit pipes to cylinder - colour coded

Connect blue pipe to the air suppl

SPECIFICATIONS

The Actuator Assembly

Air Cylinder(s) 32mm(1.25") bore x 50mm(2") stroke
Fitted with trunnion and clevis, with lug(s) ready for welding
2 push fit elbows per cylinder

The Receiver/Control Box
Radio Receiver with outputs to valves - prewired

Flow control valve
3ft lengths of output pipe with push fit connections to the cylinder(s) - colour coded for each pair of functions.
6ft length blue supply pipe fitted with 1/4" adaptor (push fit)
8ft twin core power supply cable

Max air pressure 120psi
Air requirements Must be CLEAN and DRY (air flow is minimal)
Max push 149 lbs @120psi
Max pull 128 lbs @120psi
Voltage 12 and 24 Volts available (24 Volt systems are suffixed 24 – e.g. 92 1 50/24 etc)

WILL IT FIT

Trunnion fo
cylinder mounting

Allow

a minimum of 6mm (1/4”) clearance over dimensions shown

IMPORTANT MEASUREMENT when mounting
270mm (10.6”) approx with Cylinder at mid point

FOR RADIO SPECIFICATION SEE – s92 1 04 and s92 1 06

325mm (12.8”) approx at Max Travel

Control Lever

64mm
(2.5”)
approx

Lug for clevis
at cylinder rod end

Lodar, 12189 State Highway 148 S, Henrietta, Texas. 76265 – Tel: [phone] – Fax: [phone]