Charger Power DV
Commercial Gas
Water Heaters
Power Direct Vent Water Heaters
Ideal for restaurants, commercial kitchens
retrofit and replacement applications.
Standard Features
• Independent PVC Venting - The stand alone vent exhausts
the byproducts of combustion and the separate air intake
provides fresh combustion air to the unit. Vents up to 40 feet
to an outside wall, with one 90 degree elbow, using 3" PVC
or CPVC pipe. Vents up to 55 feet to an outside wall, with
one 90 degree elbow, using 4" PVC or CPVC pipe.
• Glass-Lined Steel Tank – 300 PSI test pressure, 150 PSI
working pressure.
• Magnesium Tank Saver Anode – Large diameter anode rod
for longer tank life and greater protection.
• Electronic Ignition – Spark-to-pilot ignition system
eliminates the need for a continuously burning pilot light,
which saves energy, by providing pilot gas only when the
system calls for heat.
• Approved for Operation at 180°F Outlet Temperature.
• Temperature & Pressure Relief Valve – Factory installed.
• Brass Drain Valve
• Handhole Cleanout – Provides easy access.
• Dielectric Fittings – Factory installed and designed to
provide additional protection for longer tank life.
• Automatic Induced-Draft Blower – Provides balanced flue
operation for direct vent applications.
• Non-CFC Foam Insulation – Meets ASHRAE standby
loss requirements.
• CSA International Design Certified
• Warranty – 3 year limited tank warranty; 1 year limited
warranty on parts. (See warranty for details)
Options
• ASME Tank Construction
(250,000 Btu/hr model only)
• NSF Construction
• Low NOx Construction