现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!
CAN-Transceiver TLE 6250
TLE 6250 V33
Final Data Sheet
Features
• CAN data transmission rate up to 1 MBaud
• Suitable for 12 V and 24 V applications
• Excellent EMC performance (very high immunity and
very low emission)
• Version for 5 V and 3.3 V micro controllers
• Bus pins are short circuit proof to ground and battery
voltage
• Over-temperature protection
• Very wide temperature range (- 40°C up to 150°C)
P-DSO-8-3
Type Ordering Code Package
TLE 6250 G Q67006-A9427 P-DSO-8-3
TLE 6250 C Q67000-A9594 (chip)
TLE 6250 G V33 Q67006-A9523 P-DSO-8-3
TLE 6250 C V33 Q67000-A9538 (chip)
Description
The CAN-transceiver TLE 6250 is a monolithic integrated circuit that is available as bare
die as well as in a P-DSO-8-3 package. The IC is optimized for high speed differential
mode data transmission in automotive and industrial applications and is compatible to
ISO/DIS 11898 (see page 12 and 20). It works as an interface between the CAN protocol
controller and the physical differential bus in both, 12 V and 24 V systems.
Note:
There are two versions available: one for 5 V logic and the other one for 3.3 V logic
requiring additional supply via the V
pin. The IC can be set to stand-by mode via an
33V
control input. In addition the 5 V-version offers a receive only mode feature to support
diagnostic functions.
The IC is based on the Smart Power Technology SPT
which allows bipolar and CMOS
control circuitry in accordance with DMOS power devices existing on the same
monolithic circuit. The TLE 6250 is designed to withstand the severe conditions of
automotive applications and provides excellent EMC performance.
Data Sheet Version 3.4 1 2002-10-08
TLE 6250
TLE 6250 V33
TxD
GND
CC
RxD
1
2
P-DSO-8-3
3
4
8
7
6
5
INH
CANH
CANLV
RM
TLE 6250 G
Figure 1 Pin Configuration (top view)
Pin Definitions and Functions
TxD
GND
CC
RxD
1
2
P-DSO-8-3
3
4
TLE 6250 GV33
8
7
6
5
INH
CANH
CANLV
V
33V
Pin No. Symbol Function
1TxDCAN transmit data input; 20 k
Ω pull up, LOW in dominant state
2GNDGround;
3V
CC
5 V Supply;
4RxDCAN receive data output; LOW in dominant state,
integrated pull up
5RMReceive-only input; (5 V-version), 20 k
Ω pull up, set low to
activate RxD-only mode
V
33V
Logic supply; (3.3 V-version) 3.3 V OR 5V microcontroller logic
supply can be connected here! The digital I/Os of the TLE6250V33
adopt to the connected microcontroller logic supply at V
6CANLLow line input; LOW in dominant state
7CANHHigh line output; HIGH in dominant state
8INHControl input; 20 kΩ pull, set LOW for normal mode
33V
Data Sheet Version 3.4 2 2002-10-08
Functional Block Diagram
TLE 6250
TLE 6250 V33
CANH
CANL
GND
TLE 6250 G
7
6
2
Output
Stage
=
Driver
Temp.-
Protection
Mode Control
Receiver
3
1
8
5
4
AEB02922
V
CC
TxD
INH
RM
RxD
Figure 2 Block Diagram TLE 6250 G
Data Sheet Version 3.4 3 2002-10-08
TLE 6250
TLE 6250 V33
CANH
CANL
GND
TLE 6250 G V33
7
6
2
Output
Stage
=
Driver
Temp.-
Protection
Mode Control
Receiver
3
5
1
8
4
AEB02923
V
CC
V
3.3 V
TxD
INH
RxD
Figure 3 Block Diagram TLE 6250 G V33
Data Sheet Version 3.4 4 2002-10-08
Application Information
TLE 6250
TLE 6250 V33
INH = 1
INH = 0
and RM = 1
Stand-by Mode
RM = 0 / 1
Normal Mode
INH = 0 RM = 1
INH = 0
and RM = 0
INH = 1
RM = 0
RM = 1
Receive-only Mode
INH = 0
RM = 0INH = 1
AED02924
Normal Mode
INH = 0
INH=1 INH=0
Stand-by
Mode
INH = 1
5V Version 3.3V Version
Figure 4 Mode State Diagram
Both, the TLE 6250 G as well as the TLE 6250 C offer three different operation modes
(see Figure 4), controlled by the INH and RM pin for the TLE6250 and only by the INH
pin for the 6250 V33. In the normal mode the device is able to receive and to transmit
messages whereas in the receive-only mode signals at the TxD input are not transmitted
to the CAN bus. The receive-only mode can be used for diagnostic purposes as well as
to prevent the bus being blocked by a faulty permanent dominant TxD input signal. The
stand-by mode is a low power mode that disables both, the receiver as well as the
transmitter. For the TLE 6250 G V33 and TLE 6250 C V33 the receive only mode
feature is not available. The inhibit feature for this versions works in the same way as for
the 5V versions.
In case the receive-only feature is not used the RM pin has to be left open. When the
stand-by mode is not used the INH pin has to be connected to ground level in order to
switch the TLE 6250 in normal mode.
Data Sheet Version 3.4 5 2002-10-08
TLE 6250
Application Information for the 3.3V Version
The TLE 6250V33 can be used for both; 3.3V and 5V microcontroller logic supply as
shown below. Don´t apply external resistors between the power supply and this pin. This
may cause a voltage drop and so reduce the available voltage at this pin.
TLE 6250 G V33
7
CANH
CANL
6
100
nF
22 µF
GND
2
V
I
e.g. TLE 4476
GND
INH
8
RxD
4
1
TxD
V
5
33V
V
3
CC
100 nF 100 nF
V
Q1
V
Q2
22 µF
3.3V
µP
GND
100 nF
5V
3.3V
22 µF
22 µF
TLE 6250 G V33
7
CANH
CANL
6
V
I
100
nF
RxD
GND
2
e.g. TLE 4270
GND
INH
TxD
V
V
33V
V
CC
100 nF
Q
8
4
1
5V
5
3
100 nF
5V
22 µF
Application with 3.3V I/O supply Application with 5V I/O supply
µP
GND
Data Sheet Version 3.4 6 2002-10-08
Electrical
TLE 6250
Characteristics
TLE6250 G
(5V Version)
Data Sheet Version 3.4 7 2002-10-08
Electrical Characteristics
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit Remarks
min. max.
Voltages
TLE 6250
Supply voltage
CAN input voltage
V
CC
V
CANH/L
– 0.3 6.5 V –
– 40 40 V –
(CANH, CANL)
Logic voltages at
V
I
– 0.3 V
CC
V0 V < VCC < 5.5 V
INH, RM, TxD, RxD
Electrostatic discharge
voltage at CANH,CANL
Electrostatic discharge
voltage
V
V
ESD
ESD
– 6 6 kV human body model
(100 pF via 1.5 k
Ω)
– 2 2 kV human body model
(100 pF via 1.5 k
Ω)
Temperatures
Junction temperature
T
j
– 40 160 °C –
Note: Maximum ratings are absolute ratings; exceeding any one of these values may
cause irreversible damage to the integrated circuit.
Data Sheet Version 3.4 8 2002-10-08
Operating Range
Parameter Symbol Limit Values Unit Remarks
min. max.
TLE 6250
Supply voltage
Junction temperature
V
T
CC
j
4.5 5.5 V –
– 40 150 °C –
Thermal Resistances
Junction ambient
R
thj-a
– 185 K/W –
Thermal Shutdown (junction temperature)
Thermal shutdown
T
jsD
160 200 °C10 °C hysteresis
temperature
Data Sheet Version 3.4 9 2002-10-08
Electrical Characteristics
TLE 6250
4.5 V <
V
<5.5V; RL=60Ω; V
CC
INH
< V
; – 40 °C < Tj < 150 °C; all voltages with
INH,ON
respect to ground; positive current flowing into pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Current Consumption
Current consumption
Current consumption I
Current consumption
I
CC
CC
I
CC
– 6 10 mA recessive state;
V
= V
TxD
CC
– 45 70 mA dominant state;
V
= 0 V
TxD
– 6 10 mA receive-only mode;
RM = low
Current consumption
I
CC,stb
– 110µA stand-by mode;
TxD = RM = high
Receiver Output R
×D
HIGH level output
current
LOW level output
current
Transmission Input T×D
HIGH level input voltage
threshold
LOW level input voltage
threshold
TxD pull up resistance
note1) V
diff
= V
CANH
– V
CANL
I
RD,H
I
RD,L
V
V
R
TD,H
TD,L
TD
– -4 -2 mA VRD = 0.8 × VCC,
V
diff
< 0.4 V
note 1)
24– mA VRD = 0.2 × VCC,
note 1)
– 0.5×
V
CC
0.3×
V
CC
0.4×
V
CC
V
> 1 V
diff
0.7×
V
CC
V recessive state;
– V dominant state
10 25 50 kΩ –
Data Sheet Version 3.4 10 2002-10-08
TLE 6250
Electrical Characteristics (cont’d)
V
4.5 V <
<5.5V; RL=60Ω; V
CC
respect to ground; positive current flowing into pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
Inhibit Input (pin INH)
INH
< V
; – 40 °C < Tj < 150 °C; all voltages with
INH,ON
min. typ. max.
HIGH level input voltage
V
INH,H
– 0.5×
threshold
LOW level input voltage
threshold
INH pull up resistance
V
R
INH,L
INH
0.3×
V
CC
10 25 50 kΩ –
Receive only Input (RM) (5V version only)
HIGH level input voltage
V
RM,H
– 0.5×
threshold
LOW level input voltage
threshold
RM pull up resistance
V
R
RM,L
RM
0.3×
V
CC
10 25 50 kΩ –
V
CC
0.4×
V
CC
V
CC
0.4×
V
CC
0.7×
V
CC
V stand-by mode;
– V normal mode
0.7×
V
CC
V normal mode;
– V receive-only mode
Data Sheet Version 3.4 11 2002-10-08
TLE 6250
Electrical Characteristics (cont’d)
V
4.5 V <
<5.5V; RL=60Ω; V
CC
respect to ground; positive current flowing into pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
Bus Receiver
INH
< V
; – 40 °C < Tj < 150 °C; all voltages with
INH,ON
min. typ. max.
Differential receiver
threshold voltage,
recessive to dominant
V
diff,d
– 0.75 0.90 V – 20 V < (V
V
V
CANL
= V
diff
) < 25 V
CANH
edge
Differential receiver
threshold voltage
dominant to recessive
V
diff,r
0.50 0.60 – V – 20 V < (V
V
V
CANL
= V
diff
) < 25 V
CANH
edge
Common Mode Range CMR -20 – 25 V VCC = 5V
Differential receiver
V
diff,hys
– 150 – mV –
hysteresis
CANH, CANL input
R
i
10 20 30 kΩ recessive state
resistance
Differential input
R
diff
20 40 60 kΩ recessive state
resistance
CANH
– V
CANH
– V
,
CANL
,
CANL
Data Sheet Version 3.4 12 2002-10-08
Electrical Characteristics (cont’d)
TLE 6250
4.5 V <
V
<5.5V; RL=60Ω; V
CC
INH
< V
; – 40 °C < Tj < 150 °C; all voltages with
INH,ON
respect to ground; positive current flowing into pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Bus Transmitter
CANL/CANH recessive
output voltage
CANH, CANL recessive
V
CANL/H
V
diff
0.4 ×
V
CC
– 0.6 ×
V
CC
V V
- 1 – 0.05 V V
TxD
TxD
= V
= V
CC
CC
output voltage difference
V
= V
diff
no load; (see note 2)
CANL dominant output
voltage
CANH dominant output
voltage
CANH
– V
CANL
V
V
CANL
CANH
––2.0 V V
V
2.8 ––V V
V
TxD
= 5 V
CC
TxD
= 5 V
CC
= 0 V;
= 0 V;
CANH, CANL dominant
output voltage difference
V
diff
= V
CANH
– V
CANL
CANL short circuit
current
CANH short circuit
current
CANH short circuit
current
Output current
Output current
V
diff
I
CANLsc
I
CANHsc
I
CANHsc
I
CANH,lk
I
CANH,lk
1.5 – 3.0 V V
50 120 200 mA V
– 150 – mA
-200 -120 -50 mA V
– -120 – mA V
= 0 V;
TxD
V
= 5 V
CC
CANLshort
V
CANLshort
CANHshort
CANHshort
= 18 V
= 36 V
= 0 V
= -5 V
-50 -300 -400 µA VCC=0V, V
-50 -100 -150
V
µA V
V
CANL
=0V, V
CC
CANL
= -7 V
= -2 V
50 280 400 µA VCC=0V, V
50 100 150
V
µA V
V
CANL
=0V, V
CC
CANL
= 7 V
= 2 V
CANH
CANH
CANH
CANH
=
=
=
=
note 2) deviation from ISO/DIS 11898
Data Sheet Version 3.4 13 2002-10-08
Electrical Characteristics (cont’d)
TLE 6250 V33
4.5 V <
V
<5.5V; RL=60Ω; V
CC
INH
< V
; – 40 °C < Tj < 150 °C; all voltages with
INH,ON
respect to ground; positive current flowing into pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Dynamic CAN-Transceiver Characteristics
Propagation delay
TxD-to-RxD LOW
(recessive to dominant)
Propagation delay
TxD-to-RxD HIGH
(dominant to recessive)
Propagation delay
TxD LOW to bus
t
d(L),TR
t
d(H),TR
t
d(L),T
– 150 280 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 150 280 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 100 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V
L
dominant
Propagation delay
TxD HIGH to bus
t
d(H),T
– 100 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V
L
recessive
Propagation delay
bus dominant to RxD
LOW
Propagation delay
bus recessive to RxD
HIGH
1)
t
d(L),R
t
d(H),R
– 50 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 50 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
Data Sheet Version 3.4 14 2002-10-08
Electrical
TLE 6250 V33
Characteristics
TLE6250 GV33
(3.3V Version)
Data Sheet Version 3.4 15 2002-10-08
TLE 6250 V33
Electrical Characteristics
Absolute Maximum Ratings
Parameter Symbol Limit Values Unit Remarks
min. max.
Voltages
Supply voltage
3.3 V supply
CAN input voltage
V
CC
V
33V
V
CANH/L
– 0.3 6.5 V –
– 0.3 5.5 V –
– 40 40 V –
(CANH, CANL)
Logic voltages at
V
I
– 0.3 V
CC
V0 V < VCC < 5.5 V
INH, RM, TxD, RxD
Electrostatic discharge
voltage at CANH,CANL
Electrostatic discharge
voltage
V
V
ESD
ESD
– 6 6 kV human body model
(100 pF via 1.5 k
Ω)
– 2 2 kV human body model
(100 pF via 1.5 k
Ω)
Temperatures
Junction temperature
T
j
– 40 160 °C –
Note: Maximum ratings are absolute ratings; exceeding any one of these values may
cause irreversible damage to the integrated circuit.
Data Sheet Version 3.4 16 2002-10-08
TLE 6250 V33
Operating Range
Parameter Symbol Limit Values Unit Remarks
min. max.
Supply voltage
3.3 V supply voltage
Junction temperature
V
V
T
CC
33V
j
4.5 5.5 V –
3.0 5.5 V –
– 40 150 °C –
Thermal Resistances
Junction ambient
R
thj-a
– 185 K/W –
Thermal Shutdown (junction temperature)
Thermal shutdown
T
jsD
160 200 °C10 °C hysteresis
temperature
Data Sheet Version 3.4 17 2002-10-08
Electrical Characteristics
TLE 6250 V33
4.5 V <
– 40
V
CC
°C < T
< 5.5 V; (3.0 V < V
< 150 °C; all voltages with respect to ground; positive current flowing into
j
< 3.6 V for 3.3 V version); RL=60Ω; V
33V
INH
pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Current Consumption (3.3V version)
Current consumption
Current consumption I
Current consumption
Current consumption
I
CC+33V
CC+33V
I
33V
I
CC+33V,stb
– 6 10 mA recessive state;
V
= V
TxD
– 45 70 mA dominant state;
V
= 0 V
TxD
––2mA
– 110µA stand-by mode
TxD = high
Receiver Output R
×D
33V
< V
INH,ON
;
HIGH level output
current
LOW level output current I
Transmission Input T×D
HIGH level input voltage
threshold
LOW level input voltage
threshold
TxD pull up resistance
note1) V
diff
= V
CANH
– V
CANL
I
RD,H
RD,L
V
V
R
TD,H
TD,L
TD
– -2 -1 mA VRD = 0.8 × V
V
diff
< 0.4 V
note 1)
12– mA VRD = 0.2 × V
note 1)
– 0.55×
V
33V
0.3×
V
33V
0.45×
V
33V
V
> 1 V
diff
0.7×
V
33V
V recessive state;
– V dominant state;
10 25 50 kΩ –
33V
33V
,
,
Data Sheet Version 3.4 18 2002-10-08
TLE 6250 V33
Electrical Characteristics (cont’d)
V
4.5 V <
°C < T
– 40
< 5.5 V; (3.0 V < V
CC
< 150 °C; all voltages with respect to ground; positive current flowing into
j
pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
Inhibit Input (pin INH)
< 3.6 V for 3.3 V version); RL=60Ω; V
33V
min. typ. max.
INH
< V
INH,ON
;
HIGH level input voltage
threshold
LOW level input voltage
threshold
INH pull up resistance
V
V
R
INH,H
INH,L
INH
– 0.55×
V
33V
0.3×
V
33V
0.45×
V
33V
0.7×
V
33V
V stand-by mode;
– V normal mode;
10 25 50 kΩ –
Data Sheet Version 3.4 19 2002-10-08
TLE 6250 V33
Electrical Characteristics (cont’d)
V
4.5 V <
°C < T
– 40
< 5.5 V; (3.0 V < V
CC
< 150 °C; all voltages with respect to ground; positive current flowing into
j
pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
Bus Receiver
< 3.6 V for 3.3 V version); RL=60Ω; V
33V
min. typ. max.
INH
< V
INH,ON
;
Differential receiver
threshold voltage,
recessive to dominant
V
diff,d
– 0.75 0.90 V – 20 V < (V
V
V
CANL
= V
diff
) < 25 V
CANH
edge
Differential receiver
threshold voltage
dominant to recessive
V
diff,r
0.50 0.60 – V – 20 V < (V
V
V
CANL
= V
diff
) < 25 V
CANH
edge
Common Mode Range CMR -20 – 25 V VCC = 5V
Differential receiver
V
diff,hys
– 150 – mV –
hysteresis
CANH, CANL input
R
i
10 20 30 kΩ recessive state
resistance
Differential input
R
diff
20 40 60 kΩ recessive state
resistance
CANH
– V
CANH
– V
,
CANL
,
CANL
Data Sheet Version 3.4 20 2002-10-08
Electrical Characteristics (cont’d)
TLE 6250 V33
4.5 V <
– 40
V
CC
°C < T
< 5.5 V; (3.0 V < V
< 150 °C; all voltages with respect to ground; positive current flowing into
j
< 3.6 V for 3.3 V version); RL=60Ω; V
33V
INH
pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
min. typ. max.
Bus Transmitter
CANL/CANH recessive
output voltage
CANH, CANL recessive
V
CANL/H
V
diff
0.4 ×
V
CC
– 0.6 ×
V
CC
V V
- 1 – 0.05 V V
TxD
TxD
= V
= V
output voltage difference
V
= V
diff
no load; (see note 2)
CANL dominant output
voltage
CANH dominant output
voltage
CANH
– V
CANL
V
V
CANL
CANH
––2.0 V V
V
2.8 ––V V
V
TxD
= 5 V
CC
TxD
= 5 V
CC
= 0 V;
= 0 V;
33V
33V
< V
INH,ON
;
CANH, CANL dominant
output voltage difference
V
diff
= V
CANH
– V
CANL
CANL short circuit
current
CANH short circuit
current
CANH short circuit
current
Output current
Output current
V
diff
I
CANLsc
I
CANHsc
I
CANHsc
I
CANH,lk
I
CANH,lk
1.5 – 3.0 V V
50 120 200 mA V
– 150 – mA
-200 -120 -50 mA V
– -120 – mA V
= 0 V;
TxD
V
= 5 V
CC
CANLshort
V
CANLshort
CANHshort
CANHshort
= 18 V
= 36 V
= 0 V
= -5 V
-50 -300 -400 µA VCC=0V, V
-50 -100 -150
V
µA V
V
CANL
=0V, V
CC
CANL
= -7 V
= -2 V
50 280 300 µA VCC=0V, V
50 100 150
V
µA V
V
CANL
=0V, V
CC
CANL
= 7 V
= 2 V
CANH
CANH
CANH
CANH
=
=
=
=
note 2) deviation from ISO/DIS 11898
Data Sheet Version 3.4 21 2002-10-08
TLE 6250 V33
Electrical Characteristics (cont’d)
V
4.5 V <
°C < T
– 40
< 5.5 V; (3.0 V < V
CC
< 150 °C; all voltages with respect to ground; positive current flowing into
j
pin; unless otherwise specified.
Parameter Symbol Limit Values Unit Remarks
Dynamic CAN-Transceiver Characteristics
< 3.6 V for 3.3 V version); RL=60Ω; V
33V
min. typ. max.
INH
TLE 6250
< V
INH,ON
;
Propagation delay
TxD-to-RxD LOW
(recessive to dominant)
Propagation delay
TxD-to-RxD HIGH
(dominant to recessive)
Propagation delay
TxD LOW to bus
dominant
Propagation delay
TxD HIGH to bus
recessive
Propagation delay
bus dominant to RxD
LOW
Propagation delay
bus recessive to RxD
HIGH
t
d(L),TR
t
d(H),TR
t
d(L),T
t
d(H),T
t
d(L),R
t
d(H),R
– 150 280 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 150 280 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 100 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V
L
– 100 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V
L
– 50 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
– 50 140 ns CL = 47 pF;
R
= 60 Ω; VCC = 5 V;
L
C
= 20 pF
RxD
Data Sheet Version 3.4 22 2002-10-08
Diagrams
TLE 6250
TLE 6250 V33
8
INH
TxD
RM
RxD
V
CC
1
5
4
20 pF
3
5 V
47 pFΩ60
7
6
47 pF 60
7
Ω
6
CANH
CANL
GND
2
5V Version 3.3V Version
Figure 5 Test Circuits for Dynamic Characteristics
CANH
CANL
GND
2
INH
TxD
RxD
V
3.3V
V
CC
8
1
4
20 pF
5
3
3.3 V
100 nF
5 V
100 nF100 nF
AES02925
Data Sheet Version 3.4 23 2002-10-08
V
TxD
V
CC(33V)
GND
TLE 6250
TLE 6250 V33
V
DIFF
V
RxD
V
CC(33V)
t
d(L), T
V
DIFF(d)
t
d(L), R
0.3
V
CC(33V)
t
d(H), T
V
DIFF(r)
t
d(H), R
GND
t
d(L), TR
t
d(H), TR
Figure 6 Timing Diagrams for Dynamic Characteristics
0.7
V
CC(33V)
t
t
t
AET02926
Data Sheet Version 3.4 24 2002-10-08
Application
TLE 6250
TLE 6250 V33
120 Ω
V
Bat
CAN
Bus
7
6
CANH
CANL
V
I
TLE 6250 G
RM
INH
RxD
TxD
GND
V
2
V
CC
Q
5
8
4
1
3
100 nF
µP
GND
100 nF
5 V
e.g. TLE 4270
22 µF 100 nF
GND
22 µF
ECU 1
120 Ω
7
6
22 µF 100 nF
TLE 6250 G V33
RxD
CANH
CANL
V
GND
2
V
I
e.g. TLE 4476
GND
8
INH
4
1
TxD
5
3.3 V
V
CC
100 nF
V
Q1
V
Q2
µP
100 nF100 nF
GND
5 V
3.3 V
22 µF22 µF
ECU X
AES02927
Figure 7 Application Circuit
Data Sheet Version 3.4 25 2002-10-08
Package Outlines
P-DSO-8-3
(Plastic Dual Small Outline Package)
TLE 6250
TLE 6250 V33
Sorts of Packing
Package outlines for tubes, trays etc. are contained in our
Data Book “Package Information”
SMD = Surface Mounted Device
GPS09032
Dimensions in mm
Data Sheet Version 3.4 26 2002-10-08
Edition 2002-10-08
Published by Infineon Technologies AG,
St.-Martin-Strasse 53,
D-81541 München, Germany
© Infineon Technologies AG 2002.
All Rights Reserved.
Attention please!
The information herein is given to describe
certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical
change reserved.
We hereby disclaim any and all warranties,
including but not limited to warranties of
non-infringement, regarding circuits, descriptions and charts stated herein.
Infineon Technologies is an approved CECC
manufacturer.
TLE 6250
TLE 6250 V33
Information
For further information on technology, delivery terms and conditions and prices please
contact your nearest Infineon Technologies
Office in Germany or our Infineon Technologies Representatives worldwide (see address list).
Warnings
Due to technical requirements components
may contain dangerous substances. For information on the types in question please
contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only
be used in life-support devices or systems
with the express written approval of Infineon
Technologies, if a failure of such components
can reasonably be expected to cause the failure of that life-support device or system, or to
affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and
sustain and/or protect human life. If they fail, it
is reasonable to assume that the health of the
user or other persons may be endangered.
Data Sheet Version 3.4 27 2002-10-08
Loading...