Linksys WM11 DoC Statement

Inform Letter

Dear Customer,

According to FCC’s regulation, the following Declaration of Conformity has to be made by a company located in USA. They are:

This device has been confirmed to be in compliance with the requirements of ANSI C63.4 & FCC part 15 regulations. The test result has been shown in the ADT test report with number RF910527R02A. And this compliance is subject to the following two conditions:

(1)This device may not cause harmful interference and,

(2)This device must accept any interference received, including interference that may cause undesired operation.

This declaration can be a separate sheet and be sure that the following message will

be also included in this declaration:

1)Product name, model name and trade name.

2)Company name, and address of the one who is responsible for this declaration.

3)Name, title, telephone and fax number as well as the signature of the contact person.

Thanks for your attention.