Linksys WIP310 User Manual

Wireless-G IP Phone for VoIP Service
PRODUCT DATA
Low-Cost High Quality VoIP Calls over a Wireless-G Network
Easy, Secure Setup on WiFi Networks with industry-standard WPS
Quick Provisioning capabilities for mass-scale Service Provider activation
Wireless-G IP Phone
Model: WIP310
Wireless-G IP Phone
The Linksys WIP310 Wireless-G IP Phone enables high-quality voice over IP (VoIP) service through a Wireless-G network.
PRODUCT DATA
Features
Support SIP v2 Standards
Compliance with IEEE 802.11b/g
• Wireless Standard
WiFi Protected Setup (WPS)
Easy Configuration via Web GUI
• or Linksys Auto Provisioning
WMM QOS (802.11e)
Embedded 2.4GHz Antenna
• support
Around 3 Hours Talk Time;
• Around 50 Hours Standby Time on average**
Backlit Keypad and Display
Intuitive User Display
RF and Battery Level Indication
WiFi Site Survey Tool
Multi-profile WiFi Support
Visual Voice Mail
Connection Status Button
NAT Pass through/STUN
USB Charger Interface
Polyphonic Ring Tone
The WIP310 Wireless-G IP Phone operates in the 2.4GHz band, supports
802.11g and the latest VoIP SIP protocols. The large, full-color high resolution display features an intuitive user interface enabling users to easily and quickly configure the handset with network access using WiFi Protected Setup (WPS).
WPS is a fast, secure way of connecting the WIP310 Wireless-G IP Phone with any standards based Wireless-G broadband router. Just press the WPS button and your connection will automatically be configured and secured with a custom SSID using powerful WPA (Wi-Fi Protected Access) encryption. Within seconds you have successfully set up a secure connection.
For Internet Telephony Service Providers (ITSP), the WIP310 utilizes the same trusted and proven Linksys provisioning capabilities presently being used to deploy other popular Linksys Voice Products on a massive scale. Customers purchasing VoIP service from the ITSP and using the WIP310 can be quickly provisioned via a WiFi connection where their configuration profile is received securely right to the handset using TFTP, HTTP, or HTTPS.
The included telephone base accentuates the appealing, modern design of the handset and provides hands-free convenience when using the built-in speakerphone. The WIP310 supports many features such as caller ID, call forwarding, call transfer, 3-way conferencing and can store 200 records in its phonebook.
Benefit with low-cost VoIP service with access to any Wireless-G network using the Wireless-G IP Phone from Linksys.
Speakerphone
**Batteries are rechargeable and have a limited
number of charge cycles. The batteries may
eventually need to be replaced. Battery life
will vary from the stated average by usage,
configuration and environment.
PRODUCT DATA
Wireless-G IP Phone
Specifications
Model WIP310 Standards 802.11b, 802.11g Band 2.4GHz Transmit Power 13 dBm for 802.11g / 15 dBm for 802.11b Radio Range Out-door up to 100m-300m, In-door up to 25m-100m Antenna PIFA External interface One USB Port (1.1 and 2.0), 2.5m Standard 4 Segment Ear
Phone Jack Display 1.8 inch TFT, LCD (128 x 160 pixels) 262K Colors, Backlit Memory 32MB NAND Flash + 32MB SDRAM Network Protocols TCP/UDP/IP, IPV4, DNS, SDP, ARP, ICMP, DHCP Client, Static
IP, PPPoE Security 64-bit, 128-bit WEP Encryption WPA – PSK / TKIP WPA2 – AES / PSK (802.11i) Voice Protocols SIP v2 Session Initiation Protocol RFC3261, 3262, 3263, 3264 SDP RFC 2327 SIP Re-Registration with Primary SIP Proxy SIP Proxy Redundancy via DNS SRV Voice Codec's G.711 u-law / A-law, G.723.1 (6.3kbps, 5.3kbps), G.726 (at 32
kbps only ), G.729AB DTMF Transmission In-band, Out-band (RFC2833) Voice Quality G.167 and G.168 Echo Cancellation Automatic Gain Control (AG) Adaptive Jitter Buffer Packet/Frame Lost Concealment Adjustable Audio Frames Per Packet CNG - Comfort Noise Generation VAD - Voice Activity Detection Call Control Caller ID Call Mute Call Hold / Resume Call Forward ( Conditional, Unconditional, Busy or No
Answer) Call Transfer (Attended or Blind) Call Waiting Call Blocking Call Park Do Not Disturb Shared Line Appearance 3-way Conferencing with local mixing Phone Feature Speaker Phone Local Phone Book Dial from Call History SMS (Short Message Service) Web Services ( Weather / Stock Quote / Local Search) Selectable Ring Tones Key Lock
PRODUCT DATA
Volume Control RF/Battery level indication WiFi Signal Integrity and Performance WiFi AP Site Survey Voice / Data Statistic Speed Dial Clock Phone Book (200 Records) Call History (20 Records) Management features Embedded Web configuration interface (with password
protection) Auto Provisioning via TFTP/HTTP/HTTPS Configuration changes via MMI or Web GUI Remote Software firmware via TFTP/HTTP Configuration Configuration Redundancy
Environmental
Handset Dimensions 1.71" x 5.85" x 1" (44 x 149 x 25 mm) W x H x D Weight .24 lb, (110 g), 3.88 oz Charger Mini USB AC adapter AC100 ~ 240V Input, 5V/1.0A DC
Output Power Li-Ion 3.7V 860mAH Battery, AC Adapter Certification FCC, CE, IC, WiFi Operating Temp. 32 to 104 ºF (0 to 40ºC) Storage Temp. -4 to 149 ºF (-20 to 65ºC) Operating Humidity 10 to 80% relative humidity, non-condensing Storage Humidity 10 to 95% non-condensing
Linksys A Division of Cisco Systems, Inc. 121 Theory Irvine, CA 92617 USA
E-mail: sales@linksys.com
Web: www.linksys.com
For support, contact your Internet Service Provider (ISP).
Package Contents
Handset
• Power Adapter
• Li-ion Battery
• USB Cable
• User Guide on CD-ROM
• Quick Install Guide
Minimum Requirements
Internet Connection (cable/DSL/other)
• Access to WiFi Network
• Wireless Router / Access Point with DHCP server
• Activated VoIP Service
Check the product package and contents for specific features supported. Specifications are subject to change without notice.
Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2007 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
7100510NC-DF Model: WIP310
Loading...