Linksys WIP300 Quick Start Manual

Install and Charge the Battery Configure the IP PhoneIdentify the IP Phone’s Buttons

13

2

Package Contents

•Handset

• Power Adapter

• Quick Installation

• User Guide on CD-ROM

• Registration Information Card

A

Remove the battery compartment
cover by sliding it downwards.

B

Insert the battery with the metal
contacts facing the contacts at the
bottom of the battery compartment.

C

Replace the battery cover by sliding it
upwards until it clicks into place.

D

Connect the small end of the included
power adapter to the USB mini-B port
on the bottom of the Phone.

USB mini-B port

E

Plug the other end of the adapter
into a standard electrical outlet.

You see a charging indicator on the
LCD screen.

IMPORTANT:

charge for eight hours before initial use.

F

When the battery charging indicator
remains solid blue, the battery is fully
charged and ready for use.

Allow the battery to

Navigation Button: Move the Navigation
button up or down to scroll through menus
and settings. You can also push the
Navigation button to select a highlighted
menu item or setting.

Navigation button

Power/End Call Button: If the Phone is
off, press the Power button once to turn
the Phone on. If the Phone is on, press and
hold the Power button to turn the Phone
off. If you’re on a phone call, press the End
Call button to disconnect the call.

Power/End Call button

Call Button: Press the Call button to make
or receive phone calls.

Clear Button: If you make a mistake while
entering information in the Phone, press
the Clear button until the incorrect
characters have been erased. If you need
to erase all of the characters, press the
Clear button until they are erased.

Clear button

Soft Keys: Use the Soft Keys to select
menu items directly above the Soft Keys.

Soft Keys

Numeric Keypad: Use the numeric key
pad to enter letters and numbers in the
Phone. Press the number keys until the
letter you want is displayed on the LCD
screen. To switch from entering letters to
numbers, press the left Soft Key. To enter
special characters, press the * (star), #, or
1 keys.

Before you begin, make sure you have an
active Internet connection and the account
information provided by your Internet
phone service provider.

NOTE: The Phone automatically dims
and turns off the LCD display when the
Phone is not in use. If this happens
while you are configuring the Phone,
press any key to turn the display back
on and continue configuring the Phone.

A

Press the Power button to turn on
the Phone.

B

Press the Menu Soft Key.

C

Scroll to Profile, then press the
Navigation button to enter the
Profile menu.

D

You see a message asking you to
create a password. Press the
Navigation button, then use the
numeric keypad to enter a password.

When you are finished entering a
password, press the Navigation
button to save your password.

NOTE: After you have created a
password, you will need to enter
it to access the Profile menu.

E

Scroll to SIP Account, then press
the Select Soft Key to enter the SIP
Account menu.

Wireless-G

IP Phone

Model

WIP300

Quick Installation

Call button

Numeric Keypad

F

Press the Option Soft Key, then press
the Select Soft Key to edit the default
SIP account.

H

If you need to change a setting that
does not appear on the Edit screen,
scroll to Advanced, then press the
Select Soft Key to enter the
Advanced menu.

L

Highlight the network profile that
matches the type of security you’re
using for your wireless network. If you
don’t have security enabled on your
wireless network, highlight OPEN.

N

Highlight Wireless Settings, then
press the Select Soft Key to enter
the Wireless Settings menu.

You see a list of wireless networks in
range of the Phone. Highlight your
wireless network’s ESSID name in the
list, then press the Navigation button
to select it. Continue with step R.

R

Press the
return to the Wireless Settings menu.

Back

Soft Key until you

T

Highlight the type of security you have
enabled on your wireless network and
press the Navigation button to
select it. Then change the settings
to match your wireless network.

If you don’t have security enabled on
your wireless network, select OPEN.

V

Highlight Account Choice and press
the Navigation button to enter the
Account Choice menu. Press the
Navigation button again to assign the
default SIP account to the current
network profile, then highlight On and
press the Navigation button again to
activate it.

W

Press the Back Soft Key until you
return to the Phone’s home screen.

G

Highlight each setting your service
provider requires you to change, then
press the Select Soft Key to change
the setting.

When you are finished changing a
setting, press the Navigation button
to save your changes.

I

Highlight each setting your service
provider requires you to change, then
press the Select Soft Key to change
the setting.

When you are finished changing the
setting, press the Navigation button
to save your changes.

J

When you are finished making
changes in the advanced settings
menu, press the Back Soft Key until
you return to the Profile menu.

K

Highlight Network Profile, then press
the Select Soft key to enter the
Network Profile menu.

M

Press the Option Soft Key to enter
the Profile Options menu, then
press the Select Soft Key to
edit the network profile.

O

Highlight ESSID, then press the
Select Soft Key to enter the
ESSID menu.

P

Highlight Site Survey, then press the
Navigation button to scan for your
wireless network.

Q

If you don’t see your wireless
network’s ESSID name in the list,
your wireless network may not be
set to broadcast its ESSID name.

To enter the ESSID name manually,
press the Back Soft Key to return
to the ESSID menu, highlight New
ESSID, then press the Navigation
button to edit the ESSID name.

S

Highlight Security, then press the
Navigation button to enter the
Security menu.

U

When you are finished selecting
wireless security settings, press the
Back Soft Key until you return to the
Edit menu.

Congratulations! Installation is

complete. For more information about

your IP Phone, see the on-screen

User Guide on the CD-ROM.

For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM.
You can also e-mail for further support.

Website

http://www.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

When you are finished entering
the ESSID name, press the
Navigation button to save it.

Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.

WIP300-QI-60126NC CB