How it Works
LINKSYS
Loading...
E1000V2
User Manual
60 pgs2.71 Mb0

LINKSYS E1000V2 User Manual

User Guide
Linksys E1000
Wireless-N Router
Linksys E1000 Table of Contents
Contents
Chapter 1: Product Overview 1
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Horizontal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wall-Mounting Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2: Cisco Connect 3
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Computers and Other Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Parental Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Guest Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Router Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
How to Exit Cisco Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
How to Access Cisco Connect. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Chapter 3: Advanced Configuration 13
How to Access the Browser-Based Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setup > Basic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setup > DDNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Setup > MAC Address Clone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Setup > Advanced Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Wireless > Basic Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Manual Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Wireless > Wireless Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Wireless > Wireless MAC Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Wireless > Advanced Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Security > Firewall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Security > VPN Passthrough. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Access Restrictions > Internet Access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Applications and Gaming > Port Range Forwarding . . . . . . . . . . . . . . . . . . . . . . .28
Applications & Gaming > Port Range Triggering . . . . . . . . . . . . . . . . . . . . . . . . . .28
Applications and Gaming > DMZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Applications and Gaming > QoS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Administration > Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Administration > Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Administration > Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Administration > Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Administration > Firmware Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Status > Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Status > Local Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Status > Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Wireless-N Router
ii
Linksys E1000 Table of Contents
Appendix A: Troubleshooting 37
Appendix B: Specifications 38
Appendix C: Warranty Information 39
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Appendix D: Regulatory Information 41
FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
FCC Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Avis d’Industrie Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Wireless Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Avis de non-responsabilité concernant les appareils sans fil . . . . . . . . . . . . . . . . . .42
User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste
Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Appendix E: Software End User License Agreement 43
Cisco Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Wireless-N Router
iii
Linksys E1000 Chapter 1: Product Overview
Chapter 1: Product Overview
Thank you for choosing the Linksys E1000 Wireless-N Router. The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources such as computers, printers and files.
A variety of security features help to protect your data and your privacy while you are online. Security features include Wi-Fi Protected Access 2 (WPA2) security, which encrypts data on your wireless network; a Stateful Packet Inspection (SPI) firewall to help block unauthorized access to your Router; and Network Address Translation (NAT) technology, which enhances network protection by allowing your computers to share Internet access through a single, public Internet IP address. (IP stands for Internet Protocol.)
Setup and use of the Router is easy using Cisco Connect, the software that is installed when you run the included CD. Advanced configuration of the Router is available through the provided browser-based utility.
Top
1, 2, 3, 4 (Blue) These numbered LEDs,
corresponding with the numbered ports on the Router’s back panel, serve two purposes. The LED is continuously lit when the Router is connected to a device through that port. It flashes to indicate network activity over that port.
Wi-Fi Protected Setup Button If you have
client devices, such as wireless adapters, that support Wi-Fi Protected Setup, then you can use the Wi-Fi Protected Setup button to automatically configure wireless security for your wireless network.
To use Wi-Fi Protected Setup, refer to
Wi-Fi Protected Setup, page 20.
Wireless (Blue) The Wireless LED lights up
when the wireless feature is enabled. It flashes when the Router sends or receives data over the wireless network.
Internet (Blue) The Internet LED lights up
when there is a connection made through the Internet port. It flashes to indicate network activity over the Internet port.
Power (Blue) The Power LED lights up when
the Router is powered on. When the Router goes through its self-diagnostic mode during every boot-up, the LED flashes. When the diagnostic is complete, the LED is continuously lit.
Back
Internet Ethernet432 1Reset
Internet Using an Ethernet cable (also called
a network or Internet cable), the Internet port connects the Router to your Internet connection, which is typically a cable or Digital Subscriber Line (DSL) modem.
4, 3, 2, 1 Using Ethernet cables, these Ethernet
ports (4, 3, 2, 1) connect the Router to computers and other Ethernet network devices on your wired network.
Reset The Reset button is located on the right
side of the product label. There are two ways to reset the Router to its factory defaults. Either press and hold the Reset Button for approximately five seconds, or restore the defaults from the Administration > Factory Defaults screen in the Router’s browser-based utility (refer to
Administration > Factory Defaults, page 34).
Power The Power port connects to the
included power adapter.
12VDC
Power
Horizontal Placement
The Router has four rubber feet on its bottom panel. Place the Router on a level surface near an electrical outlet.
Wireless-N Router
1
Linksys E1000 Chapter 1: Product Overview
Wall-Mounting Placement
The Router has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm.
Two screws are needed to mount the Router.
Suggested Mounting Hardware
2.5-3.0 mm
4-5 mm 1-1.5 mm
NOTE: Cisco is not responsible for damages
incurred by unsecured wall-mounting hardware.
Follow these instructions:
1. Determine where you want to mount the Router. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet.
2. Drill two holes into the wall. Make sure the holes are 152 mm apart.
nsert a screw into each hole and leave 3 mm
3. I of its head exposed.
osition the Router so the wall-mount slots line up
4. P with the two screws.
lace the wall-mount slots over the screws and slide
5. P the Router down until the screws fit snugly into the wall-mount slots.
Wireless-N Router
152 mm
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drill precise spacing.
Wall-Mounting Template
2
Linksys E1000 Chapter 2: Cisco Connect
Router Setup
Always do this for software a
Install or run program
General options
Set up your Linksys Router
Published by Cisco Consume
Open folder to view files
using Windows Explorer
Chapter 2: Cisco Connect
During installation, the setup software installs Cisco Connect on your computer. Cisco Connect offers options to connect additional computers or devices to the Router and allows you to change the Router’s settings.
Installation
To install the Router:
1. Insert the CD into your CD-ROM drive.
Insert CD
2. Click Set up your Linksys Router.
Mac OS X
a. Double-click the CD on your desktop.
b. Double-click Setup.
3. Read the Software End User License Agreement. To accept the agreement and continue with the installation, click Next.
License Agreement
4. The connection steps are displayed.
If you do not see this, access setup on the CD directly. To do so, perform the following steps for your specific operating system:
Windows 7
a. Go to Start > Computer.
b. Double-click your CD-ROM drive.
Windows Vista
a. Go to Start > Computer.
b. Double-click your CD-ROM drive.
Windows XP
a. Go to Start > My Computer and select your
CD-ROM drive.
b. Double-click Setup.exe.
AutoPlay
DVD/CD-RW Drive (E:) Linksys Router Setup
Always do this for software and games:
Install or run program
Set up your Linksys Router
Published by Cisco Consumer Products LLC
General options
Open folder to view files
using Windows Explorer
Speed up my system
using Windows ReadyBoost
Set AutoPlay defaults in Control Panel
Set Up Your Linksys Router
Connection Overview
a. Plug the power cord into the Power port on the
back of the Router.
Internet Ethernet432 1Reset
Connect to Power Port
12VDC
Power
Wireless-N Router
3
Linksys E1000 Chapter 2: Cisco Connect
b. Plug the power adapter into an electrical outlet.
Connect to Electrical Outlet
c. Unplug the existing Ethernet cable from your
computer and plug it into the yellow port labeled Internet on the back of the Router. Click Next.
Internet Ethernet432 1Reset
12VDC
Power
6. The installation is complete. Click OK.
Installation is Complete
NOTE: If you have any problems during the
installation process, refer to the Frequently Asked Questions in the setup software, or use a computer with an active Internet connection to visit www.linksys.com/support.
Main Menu
When Cisco Connect starts up, the main menu appears:
Connect Ethernet Cable
NOTE: You can view detailed connection steps
by clicking
in the setup software.
NOTE: If the setup software detects multiple
routers, then select the serial number of your Router. The serial number is located on the left side of the product label, which is on the bottom of the Router.
5. Please wait while the setup software is setting up the Router.
Please Wait
Main Menu
Status information is displayed in the upper right corner:
• online secure
Your local network is secure, and your Internet connection is available.
• offline secure
Your local network is secure; however, your Internet connection is not available. To repair your Internet connection, follow the on-screen instructions.
NOTE: A group of computers or other devices
connected to a router is a local network. The router allows the networked devices to communicate with each other.
Wireless-N Router
4
Linksys E1000 Chapter 2: Cisco Connect
ut A
c
(In
cs O
o
l A
c
The main menu offers four options: Computers and devices, Parental controls, Guest access, and Router settings.
NOTE: To view the FAQs for more information,
click Need help?
Local Access versus Guest Access
You can connect computers or devices to your Router by giving them local access (Computers and devices option)or guest access (Guest access option).
Computers and devices with local access will have access to the Internet and to other devices on your local network, including shared computers and printers that are connected to the Router. Local access can be given to a wired or wireless device. Refer to Computers and Other Devices, page 6 for more information.
Guest access allows you to provide guests visiting your home with Internet access. Your guests will not have access to your other computers or personal data. Provide your guest with the guest network name and password. Guest computers must connect to your network using a wireless network connection. Refer to Main Menu – Guest Access, page 5 and Guest Access, page 10 for more information.
The following diagram shows a typical example of how local access and guest access are used in the same home.
Guest Access versus Local Access Diagram
Internet
Family Notebook
G
L
Modem
Guest Notebook
ss
ternet Ac
ss
Printer
Router
nly)
Main Menu – Computers and Devices
Use this option to connect another computer or device to the Router.
There is x device(s) connected to your router The
number of devices connected to the Router is displayed.
Add device To connect another computer or
device to the Router, click Add device and go to Computers and Other Devices, page 6.
Main Menu – Parental Controls
Parental controls restrict Internet access for up to five computers. For the computers you select, you can block or limit Internet access to specific times. You can also block specific websites.
Parental controls restrictions are being applied to x device(s)
The number of devices with parental controls
restrictions is displayed.
Change To enable parental controls or change settings,
click Change and go to Parental Controls, page 8.
Main Menu – Guest Access
Guest access provides Internet access only; it does not provide access to the local network and its resources. For example, the guest computer cannot print to a printer on the local network or copy files to a computer on the local network.
Guest access helps minimize exposure of your local network. To grant Internet access to friends or family, provide the guest network name and password displayed on this screen.
Guests can connect to x-guest using the password
When a guest wants Internet access in your home,
xyz
have the guest do the following:
1. Connect to the wireless guest network, which is the name of your wireless network followed by -guest.
2. Open a web browser.
3. On the login screen, enter the password of your guest network. Then click Login.
Change To disable guest access or change settings, click
Change and go to Guest Access, page 10.
Main Menu – Router Settings
Use this option to personalize the Router’s settings.
Router name is x The name of the Router is displayed.
Change To change settings, click Change and go to
Router Settings, page 10.
Wireless-N Router
5
Linksys E1000 Chapter 2: Cisco Connect
Computers and Other Devices
The Computers and other devices screen appears.
Computers and Other Devices
Computer Click this option to connect another computer
in your home. Go to Computer, page 6.
Wireless printer Click this option to connect a wireless
printer. Go to Wireless Printer, page 7.
Other devices Click this option to connect a device that
is not a computer, such as a smartphone or game console. Go to Connect Manually, page 7.
Computer
You can use a USB flash drive to create an Easy Setup Key, which holds the wireless settings for the Router. Then you can use the Easy Setup Key to connect additional computers to the Router. Select the appropriate option:
Yes, I have an Easy Setup Key If you already have an
Easy Setup Key, select this option. Click Next and go to Connect with the Easy Setup Key, page 6.
No, I don’t have an Easy Setup Key — create a new one now
Setup Key, select this option. Click Next and go to Create or Update the Easy Setup Key, page 7.
I want to connect manually using my wireless settings
Easy Setup Key), select this option. Click Next and go to Connect Manually, page 7.
If you want to create or update an Easy
If you want to connect manually (without an
Connect with the Easy Setup Key
1. Insert the Easy Setup Key into an available USB port on the computer that you want to connect to the Router.
Connecting Another Computer
2. On that computer, click Connect to your Linksys Router. (If you do not see this, access the Easy Setup Key through Windows Explorer or the Finder, and double-click Connect.)
Follow the on-screen instructions to connect that computer to the Router.
3. Come back to this computer. On the Connecting another computer screen, click Next.
4. Enter a name that will be used to identify the newly added computer. Then click Finish.
Name Your Device
Wireless-N Router
Do You Have an Easy Setup Key?
6
Linksys E1000 Chapter 2: Cisco Connect
Create or Update the Easy Setup Key
If you do not have an Easy Setup Key, then you can create one using a USB flash drive. If you already have an Easy Setup Key, then you can update it with the Router’s current settings.
1. Insert the Easy Setup Key or a USB flash drive into an available USB port on your computer.
Update or Create an Easy Setup Key
2. Please wait while settings are copied to the Easy Setup Key.
Connect Manually
1. Enter the Network name (SSID), Security Key, and Security Type settings on your wireless device (SSID stands for Service Set Identifier). To print this information, click Print these settings.
Connecting a Device
2. After your device connects, click Next.
3. Enter a name that will be used to identify this device. Then click Finish.
Copying Files to the Easy Setup Key
3. Remove the Easy Setup Key. You can now use it to connect other computers to the Router (for more information, refer to Connect with the Easy Setup Key, page 6). Click Close.
Easy Setup Key Has Been Updated
Wireless-N Router
Name Your Device
Wireless Printer
1. Refer to your printer’s documentation to learn how to connect it to a wireless printer.
2. Enter the Network name (SSID), Security Key, and Security Type settings on your wireless printer. To print this information, click Print these settings.
Connecting a Wireless Printer
7
Linksys E1000 Chapter 2: Cisco Connect
3. Wait until your printer connects. On the Connecting a wireless printer screen, click Next.
4. Enter a name that will be used to identify this printer. Then click Finish.
Name Your Printer
Parental Controls
The Parental controls screen appears.
2. Select the computer whose parental controls you want to set up. Then click OK.
Set Up Parental Controls For
3. The Parental controls main screen appears.
Parental Controls Password
First-Time Access of Parental Controls
1. The first time you access parental controls, you will be asked to set up a parental controls password. Complete the following:
• Parental controls password This password protects
access to parental controls. Create a password of 4-32 characters.
• Verify password Re-enter the password.
• Secret question Create a secret question and answer
pair. If you forget the password, you can reset it by correctly answering the secret question. Enter your question.
• Answer Enter the answer to your secret question.
Click OK to save your settings.
Parental Controls
You have the following options:
Restrict Internet access on The list of computer(s)
you have selected for parental controls is displayed. To add, remove, or rename computers on this list, refer to Restrict Internet Access List, page 9. To set up parental controls on a computer, refer to Set Up Parental Controls,
page 9.
Change parental controls password Click this option
to change the password that protects access to parental controls. Refer to Change Parental Controls Password, page 10.
Wireless-N Router
8
Linksys E1000 Chapter 2: Cisco Connect
Restrict Internet Access List
Parental Controls
Add If you want to apply parental controls to additional
computers, click Add.
If you clicked Add, the Set up parental controls for screen appears.
Set Up Parental Controls
To set up parental controls for a computer, follow these instructions:
1. Select the computer from the Restrict Internet access on list. (If the computer is not listed, click Add to select the computer.)
Parental Controls
2. The Block Internet access option offers the following:
• Always To always block Internet access, select this
option.
• Specific times To block Internet access during
specific days and times, select this option and set the schedule:
Set Up Parental Controls For
Select the computer whose parental controls you want to set up. Then click OK.
Remove If there is a computer that should not have
parental controls applied, select the computer and click Remove.
Rename To give a computer a new name, select the
computer and click Rename.
If you clicked Rename, the Rename the device screen appears.
– School nights Select the appropriate start and
end times.
– Weekends Select the appropriate start and
end times
• Never To always allow Internet access, keep the
default, Never.
3. For the Block specific sites option, click Edit to create a list of websites you want to block. By default, the list is empty.
If you clicked Edit, the Block these sites screen appears.
Block These Sites
Rename the Device
Enter the new name. Then click Rename.
Wireless-N Router
a. Enter a website address on each line.
b. Click Save to save your settings.
4. On the Parental controls screen, click Finish to save your settings.
9
Linksys E1000 Chapter 2: Cisco Connect
NOTE: Repeat steps 1-4 to set up parental
controls for different computers.
Change Parental Controls Password
If you clicked Change parental controls password, the Change your parental controls password screen appears.
Change Your Parental Controls Password
• Old password Enter the old password.
• New password Enter a new password of 4-32
characters.
• Verify password Re-enter the new password.
Click Change to save your setting.
Guest Access
If you clicked Change, the Change guest password screen appears.
Change Guest Password
• Enter a new guest password Enter a password of
4-32 characters.
• Click Change to save your setting.
Total guests allowed By default, 5 guests are allowed
Internet access through the guest network. Select the appropriate number of guests allowed on your guest network; you can select up to 10 guests.
Click Finish to save your settings.
Router Settings
The Router settings screen appears.
The Guest access settings screen appears.
Guest Access Settings
Allow guest access By default, guest access is enabled.
To disable guest access, select no.
Guest network name By default, the setup software sets
up the name of the guest network.
Password By default, the setup software sets up the
password for the guest network. To change the password, click Change.
Router Settings
Personalize
Router name The name of the Router is displayed
(this is also the name of your wireless network). To change the name, click Change and go to
Change Router Name or Password, page 11.
Password The password that protects access to the
Router’s settings is displayed (this also protects wireless access to your local network). To change the password, click
Change and go to Change Router Name or Password, page 11.
Wireless-N Router
10
Linksys E1000 Chapter 2: Cisco Connect
Easy Setup Key
Update or create key The Easy Setup Key is a USB flash
drive that holds the wireless settings for the Router. If you want to create or update an Easy Setup Key, click this option and go to Create or Update the Easy Setup Key, page 7.
Other Options
Register now to receive special offers and updates To
sign up to receive special offers and updates, click this option.
Router details To view more information about the
Router, click this option and go to Router Details, page 11.
Advanced settings To access settings for advanced
users, click this option and go to Advanced Settings, page 12.
Click Finish to save your settings.
Change Router Name or Password
NOTE: If you change the Router name or
password, you also change the name or password of your wireless network. The wireless computers or other devices connected to the Router will need to be reconnected using the new name or password (for more information, refer to Computers and Other Devices, page 6).
If you clicked Change, the Changing router name or password screen appears.
1. To change the Router name or password, click Ye s . Otherwise, click No.
2. Complete the following:
• Router name Enter a name of 1-32 characters.
• Password Enter a password of 8-63 characters.
• Click Change to save your settings.
Change Router Name and Password
Router Details
The Router details screen appears, displaying the Model name, Model number, Serial number, Firmware version, Operating system, Software version, Connection type (WAN), IP address (LAN), IP address (WAN), and Computer IP address. (WAN stands for Wide Area Network, such as the Internet. IP stands for Internet Protocol. LAN stands for Local Area Network.)
Copy To copy the details to a text file, click Copy and
follow these instructions:
1. Open a text editor, such as Microsoft Word or Notepad.
2. Go to Edit > Paste.
3. Go to File > Save.
Wireless-N Router
Router Details
Click Close to return to the Router settings screen.
Changing Router Name or Password
11
Linksys E1000 Chapter 2: Cisco Connect
Advanced Settings
If you are an advanced user familiar with router administration, you can access the browser-based utility to use the advanced configuration settings of the Router.
Username Enter this username to access the
browser-based utility.
Password Enter this password to access the
browser-based utility.
Copy password To copy the password to the Clipboard,
click this option.
Advanced Settings
Click OK to open the web browser and access the browser-based utility. For more information, refer to How to Access the Browser-Based Utility, page 13.
How to Exit Cisco Connect
To exit Cisco Connect, click Close on the main menu.
Main Menu
How to Access Cisco Connect
Windows
To access Cisco Connect, go to Start > All Programs > Cisco Connect.
Mac
To access Cisco Connect, go to Go > Applications > Cisco Connect.
Wireless-N Router
12
Linksys E1000 Chapter 3: Advanced Configuration
Chapter 3: Advanced Configuration
After setting up the Router with the setup software (located on the CD-ROM), the Router will be ready for use. If you would like to change its advanced settings, use the Router’s browser-based utility. This chapter describes each web page of the utility and each page’s key functions. You can access the utility via a web browser on a computer connected to the Router.
The browser-based utility has these main tabs: Setup,
Wireless, Security, Access Restrictions, Applications & Gaming, Administration, and Status. Additional tabs will be
available after you click one of the main tabs.
How to Access the Browser-Based Utility
To access the browser-based utility, launch the web browser on your computer, and enter the Router’s default Internet Protocol (IP) address, 192.168.1.1, or the Router’s default Uniform Resource Locator (URL) address, my.E1000, in the Address field. Then press Enter.
A login screen will appear. (Non-Windows 7 users will see a similar screen.) Leave the User name field blank. Then enter the password you set up during the setup software. (If you did not run the setup software, then use the default password, admin. You can set a new password on the Administration > Management screen. Refer to Administration > Management, page 32.) Click OK to continue.
Setup > Basic Setup
The first screen that appears is the Basic Setup screen. This allows you to change the Router’s general settings.
Setup > Basic Setup
Language
Login Screen
NOTE: You can also access the browser-based
utility through Cisco Connect. For more information, refer to Router Settings, page 10.
Language
the drop-down menu. The language of the browser-based utility will change five seconds after you select another language.
Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.
To use a different language, select one from
Internet Setup
The Internet Setup section configures the Router to your Internet connection. Most of this information can be obtained through your Internet Service Provider (ISP).
Internet Connection Type
Select the type of Internet connection your ISP provides from the drop-down menu. The available types are:
• Automatic Configuration - DHCP
• Static IP
• PPPoE
• PPTP
• L2TP
• Telstra Cable
Wireless-N Router
13
Linksys E1000 Chapter 3: Advanced Configuration
Automatic Configuration - DHCP
The default Internet Connection Type is set to Automatic Configuration - DHCP (Dynamic Host Configuration Protocol). Keep the default only if your ISP supports DHCP or if you connect using a dynamic IP address. (This option usually applies to cable connections.)
Internet Connection Type > Automatic Configuration - DHCP
Static IP
If you are required to use a permanent IP address to connect to the Internet, select Static IP.
Username and Password Enter the Username and
Password provided by your ISP.
Service Name (optional) If provided by your ISP, enter
the Service Name.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to elapse before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, specify how often the Router should check the Internet connection. The default is 30 seconds.
PPTP
Internet Connection Type > Static IP
Internet IP Address This is the Router’s IP address, when
seen from the Internet. Your ISP will provide you with the IP address you need to enter here.
Subnet Mask This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the
Gateway address, which is the ISP server’s IP address.
DNS 1-3 Your ISP will provide you with at least one DNS
(Domain Name System) server IP address.
PPPoE
Some DSL-based ISPs use Point-to-Point Protocol over Ethernet (PPPoE) to establish Internet connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use PPPoE. If they do, you will have to enable PPPoE.
Internet Connection Type > PPPoE
Wireless-N Router
Point-to-Point Tunneling Protocol (PPTP) is a service that applies to connections in Europe only.
Internet Connection Type > PPTP
If your ISP supports DHCP or you are connecting through a dynamic IP address, then select Obtain an IP Address Automatically. If you are required to use a permanent IP address to connect to the Internet, then select Specify an
IP Address. Then configure the following:
Specify an IP Address This is the Router’s IP address, as
seen from the Internet. Your ISP will provide you with the IP address you need to specify here.
Subnet Mask This is the Router’s Subnet Mask, as seen
by users on the Internet (including your ISP). Your ISP will provide you with the Subnet Mask.
Default Gateway Your ISP will provide you with the
Gateway address, which is the ISP server’s IP address.
14
Linksys E1000 Chapter 3: Advanced Configuration
DNS 1-3 Your ISP will provide you with at least one DNS
(Domain Name System) Server IP address.
PPTP Server IP Address Your ISP will provide you with
the IP address of the PPTP server.
Username and Password Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to elapse before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, specify how often the Router should check the Internet connection. The default is 30 seconds.
L2TP
Layer 2 Tunneling Protocol (L2TP) is a service that applies to connections in Israel only.
Internet Connection Type > L2TP
Server IP Address This is the IP address of the L2TP
Server. Your ISP will provide you with the IP address you need to specify here.
Username and Password Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to elapse before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, specify how often the Router should check the Internet connection. The default is 30 seconds.
Telstra Cable
Telstra Cable is a service that applies to connections in Australia only.
Internet Connection Type > Telstra Cable
Server IP Address This is the IP address of the Telstra
Cable. Your ISP will provide you with the IP address you need to specify here.
Username and Password Enter the Username and
Password provided by your ISP.
Connect on Demand: Max Idle Time You can configure
the Router to cut the Internet connection after it has been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand. In the Max Idle Time field, enter the number of minutes you want to elapse before your Internet connection terminates. The default is
5 minutes.
Keep Alive: Redial Period If you select this option, the
Router will periodically check your Internet connection. If you are disconnected, then the Router will automatically re-establish your connection. To use this option, select Keep Alive. In the Redial Period field, specify how often the Router should check the Internet connection. The default is 30 seconds.
Wireless-N Router
15
Loading...
+ 42 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use