Linear Microprox Specsheet

PHYSICAL ACCESS SOLUTIONS

MicroProx® Tag

LOW FREQUENCY PROXIMITY TAG WITH ADHESIVE BACK

 Proven, Reliable Technology – Oers extremely consistent read range.

Unaected by body shielding or variable environmental conditions, even
when close to keys and coins.

 Long Life – Passive, no-battery design allows for an infinite number of reads.

 Radio frequency proximity support – Includes read/write identification

using 125 kHz contactless technology for support in existing RFID
deployments.

Sample placement shown - actual placement
will depend on application. Due to variations
in cards and reading devices, HID does
not claim that the MicroProx® Tag will work
in every situation. Functional and non­functional MicroProx Tags are available for
compatibility testing with existing credential
and reader technologies. Compatibility
should be confirmed prior to ordering. The
tag is not compatible with the majority of
mobile phones, for adhesive tags relevant
for mobile phones, please contact your HID
representative.

The MicroProx® Tag provides the convenience of HID’s proximity technology
in a small disk-shaped transponder. This versatile credential allows for
seamless upgrades from Wiegand, magnetic stripe or barium ferrite
technologies. Simply attach the adhesive-backed MicroProxTag to any
nonmetallic card or device, and you instantly have a proximity card!

MicroProx incorporates 125 KHz contactless technology — which supports
HID Prox, Indala and EM Proximity for increased interoperability with existing
Proximity readers.

As a cost-eective tag, this credential turns your plastic ID badge or contact
smart card into a proximity enabled device. Experience the convenience of
proximity technology without the expense of card re-badging.

hidglobal.com

1.285"

(32.639mm)

0.070"

(1.78 mm)

Features

 Oers consistent read range and reliable operation.

 The size of a coin, the Tag easily attaches to all

nonmetallic materials.

SPECIFICATIONS

Base Part Number 1391

Description RF programmable, 125 kHz, customer specified numbers.

Card Construction Lexan

Dimensions

Operating

Temperature

Operating

Frequency

Data Storage Up to 84 bits (Over 1.9 x 1025 codes)

Typical Maximum

Read Range with

HID Readers

 The Tag can be programmed in any HID proximity format,

and is compatible with all HID proximity readers.

 The Tag is RF-programmable for ease of encoding with

HID’s ProxProgrammer®.

Diameter: 1.285" (3.264 cm)

Thickness: 0.070" (0.178 cm)

Weight 0.04 oz (1.18 g)

-50° to 160° F (-45° to 70° C)

125 kHz

ProxPoint® Plus reader up to 2.0" (5.1 cm)

MiniProx® reader up to 2.25" (5.7 cm)

ThinLine® II reader up to 2.5" (6.4 cm)

Prox80™ reader up to 2.25" (5.7 cm)

ProxPro® II reader up to 3.5" (8.9 cm)

ProxPro® reader up to 4" (10.2 cm)

MaxiProx® reader up to 15" (38 cm)

*Depending on local installation conditions.

North America: [phone]
Toll Free: 1 800 237 7769
Europe, Middle East, Africa: [phone]
Asia Pacific: [phone]
Latin America: [phone]

hidglobal.com

Warranty Lifetime warranty. See complete warranty policy for details.

(Please see “How to Order Guide” for a description of the options and associated part numbers.)

An ASSA ABLOY Group brand

© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, HID Global, the HID Blue Brick logo, the Chain Design, Indala,
HID Prox, MicroProx, ProxPoint, MiniProx, ThinLine, Prox80, ProxPro and MaxiProx are trademarks or registered trademarks of HID Global or
its licensor(s)/supplier(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and
product or service names are trademarks or registered trademarks of their respective owners.
2013-05-20-prox-microprox-tag-ds-en