Linear 2603 Owner's Manual

Channel

PERFORMANCE MULTI-ROOM VIDEO

Manual - 2603 In-wall Enclosure & 2613 Cover

Model 2603 Enclosure

INTEGRATED

HOME NETWORK

Model 2613 Cover

multiplex

technology, inc.

3001 Enterprise Street, Brea, CA 92821-6213, U.S.A.

714-996-4100 800-999-5225 FAX 714-996-4900 www.channelplus.com

2603 Enclosure Description

Mounts inside standard stud wall.

Contains a wide variety of ChannelPlus distribution products.

Mounting ears snap off for retro-fit installations.

Rugged powder paint finish.

Eight knock-out conduit ports.

“Clean” interior allows mounting without a cover.

2613 Cover

Unobtrusive flush cover for Model 2603.

Ventilation ports.

Unique wire-guide to bring wires in from the front.

Model 2603 includes Model 26XX mounting hardware kit.

Wire guide snaps in from

the rear side of Cover.

WIRE GUIDE

INTEGRATED

HOME

NETWORK

2603 Enclosure New Construction

Screw or Nail

Screw or Nail 4 Places

4 Places

2603 Enclosure Retrofit

Ears can be removed with pliers, use a rocking

Ears can be removed with pliers, use a rocking up and down motion, 4 Places As Shown

up and down motion, 4 Places As Shown

Drywall

6“ On Center

Enclosure

2“ x 4” Studs

Cut a 16“ X 16 3/4” Hole

in Drywall, As Shown

16“

in Drywall, As Shown

2610 Mounting hardware and wire management kit.

Snap in fasteners and wire guides for Model 2603.

Included with 2613 front cover.

Keyhole Hangar

Bushing

Push Clips Push Clips

(Small)

(Large)

PCB Mount

2 3

Keyhole Hangar

Cable Guide

3/4“

Install so that the front edge of

Install so that the front edge of the Enclosure is flush with the

the Enclosure is flush with the outside edge of the drywall.

outside edge of the drywall.

Screw or nail thru the sides of the

Screw or nail thru the sides of the Enclosure into the studs, 4 Places.

Enclosure into the studs, 4 Places.

+ 3 hidden pages