Linear 212R Specsheet

Product Specification Sheet APS282 - Rev. 07/2013

212R Vandal-Resistant Keypad Station (Surface Mount)212R Vandal-Resistant Keypad Station (Surface Mount)

Alpha CommunicationsAlpha Communications

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 016 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The acc ess control system(s) shall be Alpha
Communications®/IEI model 212R keypad(s)
or approved equivalent. The keypad memory
shall have nonvolatile EEPROM memory for up
to 120 users. Codes may be from 1-6 digits
in length and digits may be repeat ed.

Assisted by the door position sensor input,
this 1 amp Form-C relay shall energize if the
door is opened without a valid user entry or
egress input. T his output can be
programmed to energize for up to 15 minutes
or latch. It c an be reset by a valid code
entry.

The systems propped door relay can be
programmed for a 1 to 15 minute time
window in which the door may be held open
after a valid entry. The system shall alert
the resident to any "propped" door by
energizing a 1 amp Form 'C' relay. This
output may be wired to a siren, buzzer,
guard station, camera or any other device.

The lock release relay shall be rated at 8
amps and shall be tough enough to handle
any locking device. Simple programming
allows the output t o t oggle (by c ode)
or time from 1 to 90 sec onds.

212R Surface Keypad212R Surface Keypad

The 212R keypad offers field proven reliability and c ost effective solutions for residential,
commercial and industrial installations, elegant yet durable, it blends with any dec or.
Designed for c ompatibility with any elect ric locking device. The keypad ac cept power
from any 12-24V AC/DC supply. No separate programmer is ever nec essary.

FeaturesFeatures

Lock release relay
Lock release t imer
Forced door alarm relay and Propped door alarm relay
Alarm zone shunting relay
Timed egress input
120 users
Front Programming
Weather proof self-c ontained metal housing
Vandal resistant
Cast metal housing suitable for wall, post or goosenec k mounting
Available in White finish

Mechanical SpecificationsMechanical Specifications

Dimensions:

(R e ad e r)

Height: 4.50" (114.3mm)
Width: 1.75" (44.4mm)
Depth: 1.55" (39.4mm)

Dimensions:

(P rog ra m m ing Ke ypad )

Height: 4.50" (114.3mm)
Width: 2.75" (69.9mm)
Depth: 2.50" (63.5mm)

Electrical SpecificationsElectrical Specifications

Voltage:

12 to 24 volts AC or DC (selec ted by jumper)

(No rma lly us e d with m ode l SS10 6 pi gta il o r m od e l T 1 24 0 plu g- in tra ns fo rm e r)

Current:

@12VDC 20mA typical, 50mA worst c ase
@24VDC 25mA typical, 70mA worst c ase

Note:

Keypads using additional relays require an additional 15mA for
each relay energized.

Outputs:

Main relay: 8 Amp, Form 'C' @24VDC-10 Amp surge
Alarm Zone Shunting Relay: 1 Amp, Form 'C' @24VDC
Forced Door Relay: 1 Amp, Form 'C' @24VDC
Propped Door Relay: 1 Amp, Form 'C' @24VDC

Wire Distance: 250' between reader and elec tronics with #22AWG

Environmental SpecificationsEnvironmental Specifications

Temperature: -20°F to 130°F (- 28°C to 54°C)