Page 1
HAMMER STRENGTH EQUIPMENT
Frame
Frame
Movement
Workbox
PLLR - Plate Loaded Lateral Raise Assembly
Exploded
Assembly
Pads
Arm
Back
Foot
Frame
Seat
1 of 7
Page 2
HAMMER STRENGTH EQUIPMENT
Back Frame Assembly
Foot Frame Assembly
Seat Frame Assembly
PLLR – Exploded Assembly
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 PLLR-CBX-0
2 2 PLLR-CFX-0
3 1 PLLR-CST-0
4 1 PLLR-CWB-0 Workbox Asm.
5 1 PLLR-CMAL-0 Left Marm Assembly
6 1 PLLR-CMAR-0 Right Marm Asm
7 20 WASH.5STAR 1/2" Internal Lock Washer
8 10 NUT.5LOCK 1/2" Thick Lock Nut
9 8 H-BACK-WASH Backing Washer
10 10 HHB.5X3 1/2 X 3 Bolt
11 1 U24-10 Standard 24" Pad
12 1 U16-11 Standard 16" Pad
13 2 U12-4.5 12" Rectangular Pad
14 4 NUT.5JAMLOCK1/2" Thin Lock Nut
15 4 HHB.5X2.5 1/2 X 2 1/2 Bolt
16 12 WASH.375SAE 3/8" SAE Flat Washer
17 6 HHB.375X1.5 3/8 X 1 1/2 Bolt
18 6 HHB.375X2.5 3/8 X 2 1/2 Bolt
2 of 7
Page 3
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
1/2" SAE Flat Washer
1/2" Internal Lock Washer
PLLR – Back Frame
ITEM NO.QTY. PART NO.
1 1 PLLR-BX-0 Back Frame
2 2 H-BUMP-MED MM2 Medium
3 4 WASH.5SAE
4 4 NUT.5JAMLOCK 1/2" Thin Lock Nut
5 4 WASH.5STAR
6 4 HHB.5X2 1/2 X 2 Bolt
7 16 H-HPLUG(SMALL)9/16" Hole Plug
8 1 PATENT Patent Decal
9 2 STAY CLEAR Stay Clear Decal
10 2 H-PEND2 1 1/2 X 2 Endcap
3 of 7
Page 4
HAMMER STRENGTH EQUIPMENT
1 1/2 X 2 Endcap
Seat Adj. Number
1/2 X 2 1/2 Bolt
1/2" Thin Lock Nut
3/8" SAE Flat Washer
PLLR – Seat Frame
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 PLLR-ST-0 Seat Frame
2 3 H-PEND2
3 1 H-SEATRCKS Seatrack Front
4 1 H-SEATRCKS-RIB Seatrack Back
5 1 SEAT NUMBER
6 2 HHB.5X2.5
7 2 NUT.5JAMLOCK
8 1 STD-ST2 Standard Seat #2
9 1 STshft Seat Shaft
10 2 H-LCOLLAR75 3/4" Lock Collar
11 2 H-PEND3 1 1/2 X 3 End Cap
12 2 WASH.375SAE
13 1 NUT.375LOCK 3/8" Thick Lock Nut
14 1 HHB.375X4.5 3/8 X 4.5 Bolt
15 2 H-NONSKID2 1 3/4 X 9 Nonskid
16 1 SERIAL NUMBER Serial Number
4 of 7
Page 5
HAMMER STRENGTH EQUIPMENT
PLLR – Movement Arm
ITEM NO.QTY.PART NO. DESCRIPTION
1 1 PLLR-MAL-0 Left Movement Arm
2 1 ISO LATERAL RAISE Product Decal
3 2 STAY CLEAR Stay Clear Decal
4 2 H-BENDCAP Bullet Cap
5 1 H-RUBRNG MM5 Ring
6 1 SELECTOR PIN-4 SELECTOR PIN 4 INCH
7 1 H-PEND3 1 1/2 X 3 End Cap
8 1 H-PEND2 1 1/2 X 2 Endcap
9 2 1-2holeplug 1/2" Hole Plug
10 2 H-HPLUG(SMALL) 9/16" Hole Plug
11 2 ACCORDIAN Shaft Guard
5 of 7
Page 6
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
Small Bearing
1/2" Internal Lock Washer
PLLR – Workbox
ITEM NO.QTY.PART NO.
1 1 PLLR-WB-0 Workbox
2 4 H-BEAR-SML
3 8 WASH.5STAR
4 8 HHB.5X1.5 1/2 X 1 1/2 Bolt
5 8 NUT.5JAMLOCK1/2" Thin Lock Nut
6 of 7
Page 7
HAMMER STRENGTH EQUIPMENT
PART NO.
PLLR – Foot Frame
ITEM NO.QTY.
1 1 PLLR-FX-0 Foot Frame
2 1 H-NONSKID1 1 1/4 X 9 Nonskid
3 2 H-PEND3 1 1/2 X 3 End Cap
DESCRIPTION
7 of 7
Loading...