HAMMER STRENGTH EQUIPMENT
Cross-Member
Top Cross
PLDIP - Plate Loaded Seated Dip Assembly
Member
Exploded
Assembly
Pads
Movement
Arm
Seat
Assembly
Front
Side Frame
1 of 7
HAMMER STRENGTH EQUIPMENT
PLDIP - Exploded Assembly
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 PLDIP-CFX-0 ASSM FRONT CROSSMEMBER
2 1 PLDIP-CST-0 ASSM SEAT FRAME
3 1 PLDIP-CSFL-0 ASSM LEFT SIDE FRAME
4 1 PLDIP-CSFR-0 ASSM RIGHT SIDE FRAME
5 1 PLDIP-BX-0
6 1 PLDIP-CTX-0 ASSM TOP CROSSMEMBER
7 1 PLDIP-CMA-0
8 18 WASH.5STAR 1/2" Internal Lock Washer
9 14 NUT.5LOCK 1/2" Thick Lock Nut
10 14 H-BACK-WASH Backing Washer
11 14 HHB.5X3 1/2 X 3 Bolt
12 2 NUT.5JAMLOCK 1/2" Thin Lock Nut
13 2 HHB.5X2.5 1/2 X 2 1/2 Bolt
14 6 HHB.375X2.5 3/8 X 2 1/2 Bolt
15 8 WASH.375SAE 3/8" SAE Flat Washer
16 2 HHB.375X1.5 3/8 X 1 1/2 Bolt
17 2 U4W Knee Pad
18 1 U10-4.5 11" Rectangular Pad
19 1 U12-5 12" Triangular Pad
2 of 7
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
FRONT CROSSMEMBER
1 3/4 X 9 Nonskid
2 5/8 X 9 Nonskid
PLDIP - Front Cross-Member
ITEM NO. QTY. PART NO.
1 1 PLDIP-FX-0
2 4 H-HPLUG 9/16" Hole Plug
3 2 H-NONSKID2
4 2 H-NONSKID3
3 of 7
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
H-GRIP(PLDIP-B00)
1 1/2 X 3 End Cap
Large Warning Hor
1/2" Thick Lock Nut
SELECTOR PIN 4 INCH
PLDIP - Movement Arm
ITEM NO. QTY. PART NO.
1 1 PLDIP-MA-0 MOVEMENT ARM
2 2
3 4 H-PEND3
4 1 SEATED DIP Product Decal
5 1 WARNING LARGE-H
6 6 STAY CLEAR Stay Clear Decal
7 2 H-BEAR-SML Small Bearing
8 4 H-BACK-WASH Backing Washer
9 4 HHB.5X3 1/2 X 3 Bolt
10 4 NUT.5LOCK
11 1 H-NAMEPLATE Name Plate
12 4 H-BENDCAP Bullet Cap
13 2 H-RUBRNG MM5 Ring
14 2 SELECTOR PIN-4
15 8 H-HPLUG 9/16" Hole Plug
ILCB Handlebar 2
4 of 7
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
1 1/2 X 3 End Cap
1 1/4 X 9 Nonskid
1/2" Internal Lock Washer
PLDIP - Side Frame
ITEM NO. QTY. PART NO.
1 1 PLDIP-SF-0 SIDE FRAME
2 1 H-PEND3
3 1 H-NONSKID1
4 5 H-HPLUG 9/16" Hole Plug
5 1 STAY CLEAR Stay Clear Decal
6 1 H-BUMP-MED MM2 Medium
7 2 WASH.5SAE 1/2" SAE Flat Washer
8 2 NUT.5LOCK 1/2" Thick Lock Nut
9 2 WASH.5STAR
10 2 HHB.5X4.5 1/2 X 4 1/2 Bolt
5 of 7
HAMMER STRENGTH EQUIPMENT
Seatrack Front
H-SEATRCKS-RIB
Seat Adj. Number
1/2 X 2 1/2 Bolt
1/2" Thin Lock Nut
3/8" SAE Flat Washer
PLDIP - Seat Frame
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 PLDIP-ST-0 SEAT FRAME
2 3 H-SEATRCKS
3 1
4 1 SEAT NUMBER
5 4 HHB.5X2.5
6 4 NUT.5JAMLOCK
7 1 STD-ST Standard Seat #1
8 2 STshft Seat Shaft
9 4 H-LCOLLAR75 3/4" Lock Collar
10 6 WASH.375SAE
11 1 NUT.375LOCK 3/8" Thick Lock Nut
12 1 HHB.375X4.5 3/8 X 4.5 Bolt
13 1 H-PEND3 1 1/2 X 3 End Cap
14 1 ST4-C01 Std. Seat #4
15 3 H-PEND2 1 1/2 X 2 Endcap
16 1 H-GRIP(ST4-A00) HandGrip
17 2 H-HPLUG 9/16" Hole Plug
18 1 SERIAL NUMBER Serial Number
19 1 WARNING SMALL-V Small Warning Vert.
20 2 HHB.375X1 3/8 X 1 Bolt
21 2 NUT.375JAMLOCK 3/8" Thick Jam Lock Nut
22 1 SEATBELT-ASSEM Seatbelt, Complete
Seatrack Back
6 of 7
HAMMER STRENGTH EQUIPMENT
DESCRIPTION
1 1/2 X 3 End Cap
PLDIP - Top Cross-Member
ITEM NO. QTY. PART NO.
1 1 PLDIP-TX-0 TOP CROSS MEMBER
2 2 ACCORDIAN Shaft Guard
3 4 H-PEND3
7 of 7
Loading...