Life Fitness Parabody 844 User Manual
844 LAT OPTION
CLASS H
PART # 7079701
REV . B
USER’S GUIDE
1
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 844107
Revision: 06/19/01
j
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Parts list..........................4
Assembly Instructions.....4-14
General Maintenance.......15
W arranty Statement..........16
Product Services..............17
Insert-Registration Card
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
9. Children must not be allowed near this machine.
Supervise teenagers.
.
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
©
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
2
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody 844 Lat Option. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
T ools Required for Assembly
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* Tape measure
Bolt Length Ruler
NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOLT LENGTH
BOL T LENGTH RULER:
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
3
6
PARTS LIST
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
PART #
6608708
6608508
6274402
6275302
6609002
6610402
6546302
6609308
3116101
3116201
6610501
6576201
6176201
6542402
3103102
3102933
3102922
3102904
DESCRIPTION
UPRIGHT
TOP BOOM
LOW ROW BAR
LA T BAR
LOW ROW A TT ACHMENT
KNEE SUPPORT
CARRIAGE
LOW PULLEY HOUSING
4-1/2” PULLEY
3-1/2” PULLEY
LA T CABLE
LOW ROW CABLE
ROLLER P AD
1-3/4” X 5-1/4” PLA TE
1 X 8” GRIP
3/8 X 2” BOL T
3/8 X 2-3/4” BOL T
3/8 X 3” BOL T
QTY
1
1
1
1
1
1
1
1
1
5
1
1
2
2
4
2
5
2
KEY
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
PART #
3102915
3102501
3102802
6480301
3102953
3102910
3102502
3102801
6692601
3119301
6236701
3116001
6140701
6177001
3103801
3108102
6075906
DESCRIPTION
3/8 X 3-1/4” BOL T
3/8” W ASHER
3/8” LOCK NUT
3/8” FLANGE SP ACER
1/2 X 2-3/4” BOL T
1/2 X 3” BOL T
1/2” W ASHER
1/2” LOCK NUT
3 X 2” END CAP
2-1/2” ROUND END CAP
1-3/4” SQ. END CAP
1-1/4” SQ. RUBBER BUMPER
1 X 1” GLIDE
NON-SKID STRIP
5/16” SNAP LINK
1/4” QUICK DISCONNECT LINK
12 LINK CHAIN
QTY
2
10
11
8
1
3
4
2
1
2
1
1
8
2
3
1
1
5
FIGURE 1
32
STEP 1:
• Insert two 2-1/2” ROUND END CAPS (28) to the LOW ROW A TT ACHMENT (5) as shown in FIGURE 1.
• Attach two NON-SKID STRIPS (32) to the LOW ROW ATTACHMENT (5) as shown in FIGURE 1.
28
4
POWER RACK
26
8
20
1
1/2 X 3” 24
25
21
20
3/8 X 3-1/4” 19
5
FIGURE 2
STEP 2:
• Assemble the LOW ROW ATTACHMENT (5) and the LOW PULLEY HOUSING (8) to the POWER RACK using two
3/8 X 3-1/4” BOLTS (19), four 3/8” WASHERS (20), and two 3/8” LOCK NUTS (21). See FIGURE 2.
• SECUREL Y assemble the UPRIGHT (1) to the LOW PULLEY HOUSING (8) using two 1/2 X 3” BOLTS (24), two 1/2” WASH-
ERS (25), and one 1/2” LOCK NUTS (26). See FIGURE 2.
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
5
6
FIGURE 3
STEP 3:
31
7
31
30
• Apply eight 1” SQ. GLIDES (31) to the inside of the CARRIAGE (7) as shown in FIGURE 3.
• Attach one 1-1/4” SQ. RUBBER BUMPER (30) to the bottom of the CARRIAGE (7) as shown in FIGURE 3.
7
1
FIGURE 4
STEP 4:
• CAREFULLY slide the CARRIAGE (7) over the UPRIGHT (1) as shown in FIGURE 4.
6
Loading...