Life Fitness Parabody 805 User Manual

805 FLAT & INCLINE

BENCH SYSTEM

WARNING:

Read and follow all directions
for each step to insure proper
assembly of this product.

CLASS H
PAR T # 7710901
REV . B

USER’S GUIDE

V ersion: 805109

Revision: 03/15/04

j

TABLE OF CONTENTS

Safety Statement.............2

General Notes..................3

Tools Required................3

Gym Layout.....................4

Parts list..........................5

Assembly Instructions.....5-8

General Maintenance.......9

W arranty Statement..........10

Product Services..............11

Insert-Registration Card

IMPORTANT SAFETY INFORMATION

THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF

EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!

1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.

2. Obtain a medical exam before beginning any
exercise program.

3. Keep body and clothing free of all moving objects.

4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or

ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.

6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.

7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.

8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.

5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.

9. Children must not be allowed near this machine.
Supervise teenagers.

.

NOTE: In a continual effort to improve our products, specifications are subject to change
2004 Life Fitness, a division of Brunswick Corporation. All rights reserved.

©

ParaBody is a trademark of Brunswick Corporation

www.parabody.com

2

IMPORTANT NOTES

Please note:

* Thank you for purchasing the ParaBody 805 Gym System. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.

* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.

T ools Required for Assembly

* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* Adjustable wrench
* T ape measure

Bolt Length Ruler

NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.

BOLT LENGTH

BOL T LENGTH RULER:

1/2 1/2 1/2 1/2 1/2 1/2

0

1

2

345

3

6

1’

2’

3’

4’

1’ 2’ 3’ 4’

5’

6’

1 Square = 1’ X 1’

4

PARTS LIST

KEY

1
2
3
4
5
6
7
8

9
10
11
12
13
14
15

PART #

7710709
6706209
6705709
6681910
6624210
6624310
6623710
6236509
6706021
6705821
6412001
6692601
6406401
7234801
6590801

DESCRIPTION

REAR BASE
SWIVEL PLA TE
BENCH FRAME

1/4 X 2 X 16-1/2” PLA TE

LEFT BACK P AD ANGLE

RIGHT BACK P AD ANGLE

WOLFF SLEEVE

2 SQ. X 18” TUBE

BACK P AD

SEA T PAD

3/8” SPRING PIN ASSEMBL Y

3 X 2” END CAP

HINGE T AB

2” SQ END CAP COVER

3 X 2” GUIDE INSER T

QTY

1
1
1
2
1
1
1
1
1
1
1
1
2
4
2

STEP 1:

• Insert one 3 X 2” END CAP (12) into top of the REAR
BASE (1) as shown in FIGURE 1.

KEY

16
17
18
19
20
21
22
23
24
25
26
27
28
29

PART #

7339901
3118401
3235204
3235212
3235405
3235312
3235426
3114403
3114401
3114702
3114701
3221705
7656301
3235207

DESCRIPTION

U-PIN

4” VINYL CAP

3/8 X 1" BOL T
3/8 X 3" BOL T

1/2 X 1-1/4” BOL T

1/2 X 3" BOL T

1/2 X 6-1/2" BOL T
3/8" FLA T W ASHER
1/2" FLA T W ASHER

3/8" NYLOCK NUT
1/2" NYLOCK NUT

E-RING

WHEEL

3/8 X 1-3/4” BOL T

12

QTY

1
1
6
2
2
2
1

10

4
4
5
1
2
2

• Slide two END CAPS (14) over the ends of the
REAR BASE (1). See FIGURE 1.

• SECUREL Y assemble two WHEELS (28) to the REAR
BASE (1) using two 3/8 X 1-3/4” BOL TS (29) and two
3/8” LOCK NUTS (26) as shown in FIGURE 1.

STEP 2:

• Slide two 2” SQ END CAP COVER (14) over the
ends of the 2 SQ. X 18” TUBE (8). See FIGURE 2.

1

28

26

3/8 X 1-3/4” 29

14

FIGURE 1

8

14

FIGURE 2

5

15

7

27

21 1/2 X 3”

24

1

FIGURE 3

11

16

3

17

2

26

8

23

25

23

3/8 X 3” 19

STEP 3:

• Snap two 3 X 2” GUIDE INSERTS (15) into the ends of the WOLFF SLEEVE (7) as shown in FIGURE 3.

• Insert 3/8” SPRING PIN ASSEMBLY (11) into the spring pin barrel on WOLFF SLEEVE (7) and tighten nut
securely. See FIGURE 3.

• Slide one 4” VINYL CAP (17) over the U-PIN (16) as shown in FIGURE 3.

• Slide U-PIN (16) through the bushing on WOLFF SLEEVE (7) and attach with E-RING (27)

• Slide the WOLFF SLEEVE (7) over the BENCH FRAME (3).

• Securely assemble the BENCH FRAME (3) to the REAR BASE (1) & the SWIVEL PLATE (2) using two 1/2 X 3”
BOL TS (21), two 1/2” FLAT W ASHERS (24), and two 1/2” NYLOCK NUTS (26) as shown in FIGURE 3.

• Securely assemble the 2 SQ. X 18” TUBE (8) to the BENCH FRAME (3) using two 3/8 X 3” BOLTS (19), four
3/8” FLAT WASHERS (23), and two 3/8” NYLOCK NUTS (25). See FIGURE 3.

1/2 1/2 1/2 1/2 1/2 1/2

0

1

2

345

6

6

4

4

1/2 X 6-1/2” 22

13

26

7

3

FIGURE 4

STEP 4:

• Attach two 1/4 X 2 X 16-1/2” PLATES (4) to the bushing on the SWIVEL PLATE (2) using one 1/2 X 6-1/2”
BOLT (22) and one 1/2” NYLOCK NUT (26). See FIGURE 4.

• Slide two HINGE TABS (13) over the shaft on the WOLFF SLEEVE (7) as shown in FIGURE 4.

6

5

4

1/2 X 1-1/4” 20

4

24

26

20 1/2 X 1-1/4”

24

7

FIGURE 5

STEP 5:

• Slide the LEFT (5) & RIGHT (6) BACK PAD ANGLES over the shaft on the WOLFF SLEEVE (7) as shown
in FIGURE 5.

• Attach the LEFT (5) & RIGHT (6) BACK PAD ANGLES to the 1/4 X 2 X 16-1/2” PLATES (4) using two

1/2 X 1-1/4” BOLTS (20), two 1/2” FLAT WASHERS (24), and two 1/2” NYLOCK NUTS (26).

7 28

5

9

6

4

13

* All connections use one 3/8 X 1” BOLT (18) and one 3/8” FLAT WASHER (23)

10

FIGURE 6

STEP 6:

• Securely fasten the BACK PAD (9) to the LEFT (5) and RIGHT (6) BACK PAD ANGLES using four 3/8 X 1”
BOLTS (18) and four 3/8” FLAT WASHERS (23) as shown in FIGURE 6.

• Securely fasten the SEAT PAD (10) to the HINGE TABS (13) using two 3/8 X 1” BOLTS (18) and two 3/8”
FLAT WASHERS (23) as shown in FIGURE 6.

• Securely tighten the four connections on the 1/4 X 2 X 16-1/2” PLATES (4), then back nuts off 1/4 of a turn or
until the BACK PAD (9) adjusts easily.

THIS CONCLUDES THE ASSEMBLY OF THE 805 FLAT & INCLINE BENCH

1/2 1/2 1/2 1/2 1/2 1/2

0

1

2

345

6

MAINTENANCE

Please note:

* We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy
water . Touch-up paint can be purchased from your ParaBody customer service representative
at [phone].

* Inspect equipment daily . Tighten all loose connections are replace worn parts immediately.
Failure to do so may result in serious injury

* PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT
YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION.
REMEMBER TO FILL OUT YOUR WARRANTY REGISTRATION CARD AND
MAIL BACK.

MODEL #________________________

SERIAL NUMBER

SERIAL #_________________________

DATE OF PURCHASE: _____________

DEALERS NAME: _________________

DEALERS PHONE #_______________

Thank you for purchasing the ParaBody 805 Gym System.

9

LIMITED W ARRANTY

ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONL Y.

1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired
or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product.

2. LIMITED WARRANTY ON P ARTS. If the following part s are defective in material or workmanship, ParaBody will supply replacement parts:
all bolts, nuts, washers, bearings, bushings, pulleys, thumbscrews, collars, cable retaining clips, adjustable pre-stretch slides, roller pad
shafts, allen head bolts, weight selector pin, weight stack shaft, set screws, protector caps, adjustment chain, cotter pin, plunger , spring
and knob. Terms: Lifetime – for so long as the Customer owns the ParaBody product.

3. LIMITED WARRANTY ON CABLES AND UPHOLSTERY. If the coated cables or upholstery are defective in material or workmanship,
ParaBody will repair or replace them, at its option. Terms: Three (3) years.

4. CONDITIONS AND EXCEPTIONS. Any product misuse, abuse or alteration, any attempt to repair by a person other than an authorized
ParaBody Service Center, any improper assembly, accident, or any other condition resulting from occurrences beyond the control of
ParaBody will void this Limited Warranty .

5. REPLACEMENT AND REPAIR EXPENSES. ParaBody will provide only replacement parts or repair under this warranty. The Owner is
responsible for all other costs. Such costs may include, but are not limited to: a. labor charges for service, removal, repair or reinstallation
of the ParaBody product or any component part; b. shipping, delivery , handling and administrative charges for returning parts to ParaBody;
and c. all necessary or incidental costs related to installation of the replacement parts.

6. SHIPPING . If shipping by the Owners is deemed necessary (in sole discretion of ParaBody), parts should be shipped in their original carton
or equivalent packaging, fully insured with shipping charges prepaid. ParaBody will not assume any responsibility for any loss or damage
incurred in shipping.

7. CLAIM PROCEDURES. If service on your ParaBody product is required during the warranty period, please contact our Customer Service
Department at 1-800-328-9714 for instructions regarding returning or replacing parts. Please have available the following information: (i) the
dealer’s name; (ii) the date of purchase; (iii) the serial # (s) of your product (the serial number location is called out on the final assembly
drawing included with your assembly instruction); (iv) a description of the nature of the problem.

8. OWNER’S RIGHT . This Limited W arranty gives you specific legal rights. Y ou may also have other rights, which vary depending on local law .

9. LIMITATION OF IMPLIED WARRANTIES. All implied warranties, except to the extent prohibited by applicable law , shall have no greater
duration than the warranty period set forth above. There are no warranties which extend beyond the description in this Limited Warranty .
Because local laws do not allow limitations on how long an implied warranty lasts, the above limitations may not apply to you.

10. DISCLAIMER. No other express warranty has been made or will be made on behalf of ParaBody with respect to any ParaBody product or
the operation, repair or replacement of any ParaBody product. ParaBody shall not be responsible for injury , loss of use of the ParaBody
product, inconvenience, loss or damage to personal property, whether direct or indirect, and incidental or consequential damages, so the
above limitation or exclusion may not apply to you.

NOTES:

10

LIFEFITNESS

5100 North River Road. Schiller Park, IL. 60176 U.S.A.

T el: 847.288.3300 Fax: [phone]

800.328.9714 (T oll-free within the U.S. and Canada)
www.parabody.com

INTERNATIONAL OFFICES

Life FitnessAtlantic BV
Atlantic Headquarters
Bijdorpplein 25-31
2992 LB Barendrecht
The Netherlands
Phone: [phone]
Fax: [phone]

Life Fitness EUROPE GmbH
Siemensstrasse 3
85716 Unterschleissheim
Germany
Phone: [phone]
Fax: [phone]

Life Fitness Italia S.R.L.
V ia Elvas 92
39042 Bressanone
Italy
Phone: [phone]
Fax: [phone]

Life Fitness (UK) Ltd.
Queen Adelaide
Ely , Cambs CB7 4UB
United Kingdom
Phone CSS: [phone]
Fax CSS: [phone]

Life Fitness Benelux N.V.
Bijdorpplein 25-31
2992 LB Barendrecht
The Netherlands
Phone: [phone]
Fax: [phone]

Life Fitness Japan
8/F , Nippon Brunswick Building
5-27-7 Sendagaya
Shibuya-Ku, T okyo 151-0051
Japan
Phone: [phone]
Fax: [phone]

Life Fitness Asia Pacific Limited
Room 2610, Miramar T ower
132 Nathan Road, T simshatsui
Kowloon, Hong Kong
Phone: [phone]
Fax: [phone]

11

Life Fitness Do Brazil
Al. Rio Negro, 433-Predio 2-Sala 2

º andar (Confab)

3
Aplhaville-Barueri-Sao Paulo
CEP: 06454-904
Brazil
Phone: [phone]
Fax: [phone]